KEMET Organic Capacitor (KO-CAP) T520 Series Polymer Tantalum Overview The KEMET Organic Capacitor (KO-CAP) is a tantalum capacitor with a Ta anode and Ta2O5 dielectric. A conductive organic polymer replaces the traditionally used MnO2 as the cathode plate of the capacitor. This results in very low ESR and improved capacitance retention at high frequency. The KOCAP also exhibits a benign failure mode which eliminates the ignition failures that can occur in standard MnO2 tantalum types. KO-CAPs may also be operated at steady state voltages up to 90% of rated voltage for part types with rated voltages of ≤ 10 volts and up to 80% of rated voltage for part types > 10 volts with equivalent or better reliability than traditional MnO2 tantalum capacitors operated at 50% of rated voltage. The T520 Series KO-CAP Low ESR Polymer captures the best features of multilayer ceramic (low ESR, high frequency capacitance retention), aluminum electrolytic (higher capacitance, benign failure mode), and proven solid tantalum technology (volumetric efficiency, surface mount capability, extremely long life). The T520 can reduce component counts, eliminate throughhole assembly by replacing cumbersome leaded aluminum capacitors, and offer a cost-effective and space-saving solution. Benefits Applications • • • • • • • • • • • • Typical applications include DC/DC converters, notebook PCs, portable electronics, telecommunications (mobile phone and base station), displays, SSD, HDD and USB. Extremely low ESR -55°C to 105°C operating temperature range Polymer cathode technology High frequency capacitance retention Non-ignition failure mode Capacitance up to 1,500 µF 100% accelerated steady state aging 100% surge current tested Taped and reeled per EIA 481–1 Volumetric efficiency Self-healing mechanism EIA standard case sizes Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 1 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. Ordering Information T 520 V 157 M 006 A T E045 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material ESR Code T= Tantalum 520 = Polymer A, B, C, D, H, L, M, Q, T, U, V, W, X, Y First two digits represent significant figures. Third digit specifies number of zeros. M = ±20% T = 100% Matte Tin (Sn) Plated H = Tin/Lead (SnPb) Solder Coated (5% Pb minimum) E = ESR Last three digits specify ESR in mΩ. (045 = 45 mΩ) 2R5 = 2.5 V 003 = 3 V 004 = 4 V 006 = 6.3 V 008 = 8 V 010 = 10 V 011 = 11 V 12R = 12.5 V 016 = 16 V 020 = 20 V 025 = 25 V A = N/A Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz) ESR (100 kHz) Leakage Current -55°C to 105°C 10 – 1,500 µF @ 120 Hz/25°C M Tolerance (20%) 2.5 – 25 V ≤ 10% Refer to Part Number Electrical Specification Table ≤ 0.1 CV (μA) at rated voltage after 5 minutes © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 2 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Qualification Test Condition Characteristics Δ C/C Endurance Storage Life Humidity Temperature Stability 105°C @ rated voltage, 2,000 hours 105°C @ 0 volts, 2,000 hours 60°C, 90% RH, 1,000 hours Extreme temperature exposure at a succession of continuous steps at +25ºC, -55ºC, +25ºC, +85ºC, +105ºC, +25ºC DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Δ C/C Within -20%/+10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Δ C/C Within -5%/+35% of initial value DF Within initial limits DCL Within 5.0 x initial limit ESR Within 2.0 x initial limit +25°C -55°C +85°C +105°C Δ C/C IL* ±20% ±20% ±30% DF IL IL 1.2 x IL 1.5 x IL DCL IL n/a 10 x IL 10 x IL Δ C/C Surge Voltage Mechanical Shock/Vibration Within -20%/+10% of initial value 105°C, 1.32 x rated voltage, 1,000 cycles MIL–STD–202, Method 213, Condition I, 100 G peak. MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within -20%/+10% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 3 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 100 1000 T520B157M006ATE035_Imp T520V337M006ATE015_Imp 10 T520D337M006ATE009_Imp T520B157M006ATE035_ESR Capacitance (µF) Impedance,ESR (Ohms) T520C227M006ATE025_Imp T520C227M006ATE025_ESR T520V337M006ATE015_ESR 1 T520D337M006ATE009_ESR 0.1 100 10 T520B157M006ATE035 T520C227M006ATE025 T520V337M006ATE015 T520D337M006ATE009 0.01 1 0.001 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions – Millimeters (Inches) Metric will govern Termination cutout at KEMET’s option, either end Case Size KEMET EIA A 3216–18 B 3528–21 C 6032–28 D 7343–31 H 7360–20 L 6032–19 M 3528–15 Q 7343-12 T 3528–12 U 6032–15 V 7343–19 W 7343–15 X 7343–43 Y 7343–40 Component L* W* H* 3.2 ±0.2 (0.126 ±0.008) 3.5 ±0.2 (0.138 ±0.008) 6.0 ±0.3 (0.236 ±0.03) 7.3 ±0.3 (0.287 ±0.012) 7.3 ±0.3 (0.287 ±0.012) 6.0 ±0.3 (0.236 ±0.012) 3.5 ±0.2 (0.138 ±0.008) 7.3 ±0.3 (0.287 ±0.012) 3.5 ±0.2 (0.138 ±0.008) 6.0 ±0.3 (0.236 ±0.012) 7.3 ±0.3 (0.287 ±0.012) 7.3 ±0.3 (0.287 ±0.012) 7.3 ±0.3 (0.287 ±0.012) 7.3 ±0.3 (0.287 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 2.8 ±0.2 (0.110 ±0.008) 3.2 ±0.3 (0.126 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 6.0±0.3 (0.236 ±0.012) 3.2 ±0.2 (0.110 ±0.008) 2.8 ±0.2 (0.110 ±0.008) 4.3 ±0.3 (0.169 ±0.012) 2.8 ±0.2 (0.110 ±0.008) 3.2 ±0.2 (0.110 ±0.008) 4.3 ±0.3 (0.169 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.9 ± 0.1 (0.075 ±0.004) 2.5 ±0.3 (0.098 ±0.012) 2.8 ±0.3 (0.110 ±0.012) 2.0 (0.078) Maximum F* ±0.1 S* ±0.3 B* ±0.15 ±(0.004) ±(0.012) (Ref) ±0.006 X (Ref) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) 0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) n/a n/a 0.13 (.005) 3.3 (.130) 3.5 (.138) 3.5 (.138) 1.2 (.047) 0.8 (.031) 0.4 (.016) 1.1 (.043) 1.3 (.051) 2.2 (.087) 0.8 (.031) 0.4 (.016) 2.2 (.087) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) 4.1 (.161) 1.3 (.051) n/a 1.9 (0.075) 2.2 (.087) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094) 1.5 (0.059) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087) 1.2 (0.047) Maximum 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.2 (0.047) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087) 1.5 (0.059) 2.2 (.087) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094) 1.9 (0.075) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.5 (0.059) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 4.0 ±0.3 2.4 (.094) (0.157 ±0.012) 4.0 (0.157) 2.4 (.094) 1.3 (.051) 0.5 (.020) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL–PRF–55365/8 specified dimensions © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 4 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 470 47 56 56 68 68 100 100 100 100 100 100 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 330 V/7343-19 A/3216-18 T/3528-12 T/3528-12 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T/3528-12 U/6032-15 C/6032-28 C/6032-28 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 L/6032-19 L/6032-19 L/6032-19 W/7343-15 T520V477M002A(1)E040 T520A476M2R5A(1)E090 T520T566M2R5A(1)E040 T520T566M2R5A(1)E070 T520A686M2R5A(1)E070 T520A686M2R5A(1)E080 T520T107M2R5A(1)E040 T520T107M2R5A(1)E070 T520B107M2R5A(1)E025 T520B107M2R5A(1)E035 T520B107M2R5A(1)E040 T520B107M2R5A(1)E070 T520U157M2R5A(1)E055 T520B227M2R5A(1)E015 T520B227M2R5A(1)E018 T520B227M2R5A(1)E021 T520B227M2R5A(1)E025 T520B227M2R5A(1)E030 T520B227M2R5A(1)E035 T520B227M2R5A(1)E055 T520B227M2R5A(1)E070 T520T227M2R5A(1)E070 T520U227M2R5A(1)E055 T520C227M2R5A(1)E025 T520C227M2R5A(1)E045 T520W227M2R5A(1)E025 T520V227M2R5A(1)E006 T520V227M2R5A(1)E007 T520V227M2R5A(1)E009 T520V227M2R5A(1)E012 T520V227M2R5A(1)E015 T520V227M2R5A(1)E025 T520V227M2R5A(1)E045 T520D227M2R5A(1)E007 T520D227M2R5A(1)E040 T520B337M2R5A(1)E012 T520B337M2R5A(1)E015 T520B337M2R5A(1)E018 T520B337M2R5A(1)E035 T520B337M2R5A(1)E045 T520B337M2R5A(1)E070 T520C337M2R5A(1)E015 T520C337M2R5A(1)E018 T520C337M2R5A(1)E025 T520C337M2R5A(1)E045 T520L337M2R5A(1)E009 T520L337M2R5A(1)E012 T520L337M2R5A(1)E025 T520W337M2R5A(1)E015 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 94 12 14 14 17 17 25 25 25 25 25 25 38 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 83 83 83 83 83 83 83 83 83 83 83 83 83 83 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 8 8 8 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 10 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 40 90 40 70 70 80 40 70 25 35 40 70 55 15 18 21 25 30 35 55 70 70 55 25 45 25 6 7 9 12 15 25 45 7 40 12 15 18 35 45 70 15 18 25 45 9 12 25 15 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 2200 1100 1600 1200 1300 1200 1600 1200 2300 1900 1800 1300 1600 2900 2700 2500 2300 2100 1900 1500 1300 1225 1600 2600 1900 2700 5600 5200 4600 3900 3500 2700 2000 5700 2400 2700 2900 2700 1900 1700 1300 3300 3000 2600 1900 4100 3500 2400 3500 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 5 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 680 680 680 680 680 1000 1000 1000 1000 1000 1000 100 100 100 100 150 150 150 150 330 330 330 330 680 680 1000 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 X/7343-43 T520W337M2R5A(1)E025 T520W337M2R5A(1)E040 T520V337M2R5A(1)E006 T520V337M2R5A(1)E007 T520V337M2R5A(1)E009 T520V337M2R5A(1)E012 T520V337M2R5A(1)E015 T520V337M2R5A(1)E018 T520V337M2R5A(1)E025 T520V337M2R5A(1)E040 T520D337M2R5A(1)E006 T520D337M2R5A(1)E007 T520V477M2R5A(1)E006 T520V477M2R5A(1)E007 T520V477M2R5A(1)E009 T520V477M2R5A(1)E012 T520V477M2R5A(1)E015 T520V477M2R5A(1)E018 T520C477M2R5A(1)E025 T520C477M2R5A(1)E045 T520D477M2R5A(1)E006 T520D477M2R5A(1)E007 T520D477M2R5A(1)E009 T520D687M2R5A(1)E010 T520D687M2R5A(1)E015 T520D687M2R5A(1)E040 T520Y687M2R5A(1)E015 T520Y687M2R5A(1)E025 T520D108M2R5A(1)E015 T520D108M2R5A(1)E030 T520Y108M2R5A(1)E010 T520Y108M2R5A(1)E015 T520Y108M2R5A(1)E025 T520X108M2R5A(1)E010 T520B107M003A(1)E025 T520B107M003A(1)E035 T520B107M003A(1)E040 T520B107M003A(1)E070 T520B157M003A(1)E025 T520B157M003A(1)E035 T520B157M003A(1)E040 T520B157M003A(1)E070 T520V337M003A(1)E009 T520V337M003A(1)E012 T520V337M003A(1)E015 T520V337M003A(1)E025 T520D687M003A(1)E015 T520D687M003A(1)E040 T520X108M003A(1)E015 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 83 83 83 83 83 83 83 83 83 83 83 83 118 118 118 118 118 118 118 118 118 118 118 170 170 170 170 170 250 250 250 250 250 250 30 30 30 30 45 45 45 45 99 99 99 99 204 204 300 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 25 40 6 7 9 12 15 18 25 40 6 7 6 7 9 12 15 18 25 45 6 7 9 10 15 40 15 25 15 30 10 15 25 10 25 35 40 70 25 35 40 70 9 12 15 25 15 40 15 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 2700 2100 5600 5200 4600 3900 3500 3200 2700 2200 6100 5700 5600 5200 4600 3900 3500 3200 2600 1900 6100 5700 5000 4700 3900 2400 4000 3100 3900 2700 4900 4000 3100 5000 2300 1900 1800 1300 2300 1900 1800 1300 4600 3900 3500 2700 3900 2400 4100 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 6 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1000 15 33 33 47 47 47 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 X/7343-43 T/3528-12 A/3216-18 A/3216-18 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 L/6032-19 T520X108M003A(1)E030 T520T156M004A(1)E100 T520A336M004A(1)E070 T520A336M004A(1)E080 T520A476M004A(1)E070 T520A476M004A(1)E080 T520T476M004A(1)E070 T520T686M004A(1)E070 T520B686M004A(1)E025 T520B686M004A(1)E035 T520B686M004A(1)E040 T520B686M004A(1)E070 T520U686M004A(1)E055 T520A107M004A(1)E150 T520A107M004A(1)E200 T520T107M004A(1)E070 T520T107M004A(1)E150 T520B107M004A(1)E025 T520B107M004A(1)E035 T520B107M004A(1)E040 T520B107M004A(1)E070 T520U107M004A(1)E055 T520B157M004A(1)E015 T520B157M004A(1)E018 T520B157M004A(1)E025 T520B157M004A(1)E030 T520B157M004A(1)E035 T520B157M004A(1)E040 T520B157M004A(1)E070 T520U157M004A(1)E055 T520C157M004A(1)E015 T520C157M004A(1)E025 T520C157M004A(1)E045 T520C157M004A(1)E100 T520V157M004A(1)E007 T520V157M004A(1)E009 T520V157M004A(1)E012 T520V157M004A(1)E015 T520V157M004A(1)E025 T520D157M004A(1)E007 T520B227M004A(1)E035 T520B227M004A(1)E045 T520B227M004A(1)E070 T520C227M004A(1)E015 T520C227M004A(1)E018 T520C227M004A(1)E025 T520C227M004A(1)E045 T520C227M004A(1)E055 T520L227M004A(1)E012 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 300 6 13 13 19 19 19 27 27 27 27 27 27 40 40 40 40 40 40 40 40 40 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 88 88 88 88 88 88 88 88 88 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 30 100 70 80 70 80 70 70 25 35 40 70 55 150 200 70 150 25 35 40 70 55 15 18 25 30 35 40 70 55 15 25 45 100 7 9 12 15 25 7 35 45 70 15 18 25 45 55 12 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 2900 1000 1300 1200 1300 1200 1200 1200 2300 1900 1800 1300 1600 900 700 1200 800 2300 1900 1800 1300 1600 2900 2700 2300 2100 1900 1800 1300 1600 3300 2600 1900 1300 5200 4600 3900 3500 2700 5700 1900 1700 1300 3300 3000 2600 1900 1700 3500 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 7 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 680 680 680 680 680 680 680 680 680 15 22 22 L/6032-19 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 T/3528-12 A/3216-18 A/3216-18 T520L227M004A(1)E025 T520W227M004A(1)E025 T520W227M004A(1)E040 T520V227M004A(1)E006 T520V227M004A(1)E007 T520V227M004A(1)E009 T520V227M004A(1)E012 T520V227M004A(1)E015 T520V227M004A(1)E018 T520V227M004A(1)E025 T520V227M004A(1)E040 T520V227M004A(1)E045 T520D227M004A(1)E006 T520D227M004A(1)E007 T520D227M004A(1)E012 T520D227M004A(1)E065 T520C337M004A(1)E025 T520C337M004A(1)E045 T520V337M004A(1)E007 T520V337M004A(1)E009 T520V337M004A(1)E012 T520V337M004A(1)E018 T520V337M004A(1)E025 T520V337M004A(1)E040 T520D337M004A(1)E006 T520D337M004A(1)E007 T520D337M004A(1)E009 T520D337M004A(1)E012 T520D337M004A(1)E015 T520D337M004A(1)E040 T520D337M004A(1)E045 T520D477M004A(1)E010 T520D477M004A(1)E012 T520D477M004A(1)E015 T520D477M004A(1)E018 T520D477M004A(1)E025 T520D477M004A(1)E040 T520D687M004A(1)E012 T520D687M004A(1)E015 T520D687M004A(1)E025 T520Y687M004A(1)E010 T520Y687M004A(1)E015 T520Y687M004A(1)E025 T520X687M004A(1)E010 T520X687M004A(1)E015 T520X687M004A(1)E035 T520T156M006A(1)E100 T520A226M006A(1)E090 T520A226M006A(1)E100 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 188 188 188 188 188 188 272 272 272 272 272 272 272 272 272 9 14 14 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 25 25 40 6 7 9 12 15 18 25 40 45 6 7 12 65 25 45 7 9 12 18 25 40 6 7 9 12 15 40 45 10 12 15 18 25 40 12 15 25 10 15 25 10 15 35 100 90 100 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 2400 2700 2100 5600 5200 4600 3900 3500 3200 2700 2200 2000 6100 5700 4300 1900 2600 1900 5200 4600 3900 3200 2700 2200 6100 5700 5000 4300 3900 2400 2200 4700 4300 3900 3500 3000 2400 4300 3900 3000 4900 4000 3100 5000 4100 2700 1000 1100 1100 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 8 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 22 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 120 150 150 150 150 T/3528-12 A/3216-18 A/3216-18 A/3216-18 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 U/6032-15 C/6032-28 A/3216-18 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 C/6032-28 C/6032-28 B/3528-21 M/3528-15 M/3528-15 M/3528-15 B/3528-21 T520T226M006A(1)E100 T520A336M006A(1)E070 T520A336M006A(1)E080 T520A336M006A(1)E120 T520T336M006A(1)E070 T520B336M006A(1)E025 T520B336M006A(1)E035 T520B336M006A(1)E040 T520B336M006A(1)E070 T520C336M006A(1)E100 T520A476M006A(1)E150 T520T476M006A(1)E040 T520T476M006A(1)E070 T520B476M006A(1)E025 T520B476M006A(1)E035 T520B476M006A(1)E040 T520B476M006A(1)E070 T520A686M006A(1)E150 T520T686M006A(1)E070 T520T686M006A(1)E150 T520B686M006A(1)E025 T520B686M006A(1)E035 T520B686M006A(1)E040 T520B686M006A(1)E070 T520U686M006A(1)E055 T520U686M006A(1)E070 T520C686M006A(1)E100 T520A107M006ATE070 T520T107M006A(1)E070 T520B107M006A(1)E015 T520B107M006A(1)E018 T520B107M006A(1)E025 T520B107M006A(1)E035 T520B107M006A(1)E040 T520B107M006A(1)E045 T520B107M006A(1)E070 T520U107M006A(1)E055 T520W107M006A(1)E040 T520V107M006A(1)E009 T520V107M006A(1)E012 T520V107M006A(1)E015 T520V107M006A(1)E045 T520C107M006A(1)E025 T520C107M006A(1)E045 T520B127M006A(1)E035 T520M157M006A(1)E070 T520M157M006A(1)E150 T520M157M006A(1)E200 T520B157M006A(1)E025 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 14 21 21 21 21 21 21 21 21 21 30 30 30 30 30 30 30 43 43 43 43 43 43 43 43 43 43 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 76 95 95 95 95 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 8 8 8 8 8 8 8 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 100 70 80 120 70 25 35 40 70 100 150 40 70 25 35 40 70 150 70 150 25 35 40 70 55 70 100 70 70 15 18 25 35 40 45 70 55 40 9 12 15 45 25 45 35 70 150 200 25 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 1000 1300 1200 1000 1200 2300 1900 1800 1300 1300 900 1600 1200 2300 1900 1800 1300 900 1200 800 2300 1900 1800 1300 1600 1400 1300 1035 1200 2900 2700 2300 1900 1800 1700 1300 1600 2100 4600 3900 3500 2000 2600 1900 1900 1300 900 800 2300 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 9 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 U/6032-15 U/6032-15 L/6032-19 L/6032-19 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T520B157M006A(1)E035 T520B157M006A(1)E045 T520B157M006A(1)E070 T520C157M006A(1)E015 T520C157M006A(1)E025 T520C157M006A(1)E045 T520C157M006A(1)E055 T520U157M006A(1)E045 T520U157M006A(1)E055 T520L157M006A(1)E012 T520L157M006A(1)E025 T520W157M006A(1)E025 T520W157M006A(1)E040 T520V157M006A(1)E006 T520V157M006A(1)E007 T520V157M006A(1)E009 T520V157M006A(1)E012 T520V157M006A(1)E015 T520V157M006A(1)E018 T520V157M006A(1)E025 T520V157M006A(1)E040 T520V157M006A(1)E045 T520D157M006A(1)E006 T520D157M006A(1)E007 T520D157M006A(1)E015 T520D157M006A(1)E025 T520D157M006A(1)E055 T520B227M006A(1)E025 T520B227M006A(1)E035 T520B227M006A(1)E045 T520B227M006A(1)E070 T520C227M006A(1)E015 T520C227M006A(1)E018 T520C227M006A(1)E025 T520C227M006A(1)E045 T520V227M006A(1)E007 T520V227M006A(1)E009 T520V227M006A(1)E012 T520V227M006A(1)E015 T520V227M006A(1)E018 T520V227M006A(1)E025 T520V227M006A(1)E040 T520D227M006A(1)E006 T520D227M006A(1)E007 T520D227M006A(1)E009 T520D227M006A(1)E015 T520D227M006A(1)E018 T520D227M006A(1)E025 T520D227M006A(1)E040 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 35 45 70 15 25 45 55 45 55 12 25 25 40 6 7 9 12 15 18 25 40 45 6 7 15 25 55 25 35 45 70 15 18 25 45 7 9 12 15 18 25 40 6 7 9 15 18 25 40 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 1900 1700 1300 3300 2600 1900 1700 1700 1600 3500 2400 2700 2100 5600 5200 4600 3900 3500 3200 2700 2200 2000 6100 5700 3900 3000 2000 2300 1900 1700 1300 3300 3000 2600 1900 5200 4600 3900 3500 3200 2700 2200 6100 5700 5000 3900 3500 3000 2400 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 10 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 8 8 8 8 8 8 8 8 8 8 8 8 8 220 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 680 1000 1500 33 33 33 33 33 33 33 47 47 82 82 150 150 D/7343-31 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 W/7343-15 W/7343-15 V/7343-19 V/7343-19 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 H/7260-20 H/7260-20 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 B/3528-21 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 T520D227M006A(1)E050 T520V337M006A(1)E015 T520V337M006A(1)E018 T520V337M006A(1)E025 T520V337M006A(1)E040 T520V337M006A(1)E045 T520D337M006A(1)E009 T520D337M006A(1)E010 T520D337M006A(1)E015 T520D337M006A(1)E018 T520D337M006A(1)E025 T520D337M006A(1)E040 T520D337M006A(1)E045 T520Y337M006A(1)E010 T520Y337M006A(1)E015 T520Y337M006A(1)E025 T520Y337M006A(1)E040 T520W477M006A(1)E055 T520W477M006A(1)E035 T520V477M006A(1)E055 T520V477M006A(1)E035 T520Y477M006A(1)E010 T520Y477M006A(1)E015 T520Y477M006A(1)E018 T520Y477M006A(1)E025 T520Y477M006A(1)E035 T520D477M006A(1)E015 T520D477M006A(1)E025 T520D477M006A(1)E030 T520X477M006A(1)E010 T520X477M006A(1)E018 T520X477M006A(1)E035 T520X477M006A(1)E040 T520X687M006A(1)E025 T520H108M006A(1)E055 T520H158M006A(1)E055 T520T336M008A(1)E070 T520T336M008A(1)E080 T520B336M008A(1)E025 T520B336M008A(1)E035 T520B336M008A(1)E040 T520B336M008A(1)E070 T520U336M008A(1)E070 T520B476M008A(1)E035 T520B476M008A(1)E070 T520C826M008A(1)E025 T520C826M008A(1)E045 T520D157M008A(1)E025 T520D157M008A(1)E040 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 139 208 208 208 208 208 208 208 208 208 208 208 208 208 208 208 208 296 296 296 282 296 296 296 296 296 296 296 296 296 296 296 296 428 630 945 26 26 26 26 26 26 26 38 38 66 66 120 120 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 8 8 8 8 8 8 8 8 8 8 8 10 10 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 50 15 18 25 40 45 9 10 15 18 25 40 45 10 15 25 40 55 35 55 35 10 15 18 25 35 15 25 30 10 18 35 40 25 55 55 70 80 25 35 40 70 70 35 70 25 45 25 40 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 2100 3500 3200 2700 2200 2000 5000 4700 3900 3500 3000 2400 2200 4900 4000 3100 2500 1800 2300 1800 2300 4900 4000 3700 3100 2600 3900 3000 2700 5000 3700 2700 2500 3100 1800 1800 1200 1100 2300 1900 1800 1300 1400 1900 1300 2600 1900 3000 2400 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 85 85 85 105 105 105 105 105 105 105 105 105 105 105 105 105 105 85 85 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 11 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 150 150 10 15 22 33 33 33 33 33 33 33 33 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 D/7343-31 V/7343-19 A/3216-18 A/3216-18 A/3216-18 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 B/3528-21 B/3528-21 U/6032-15 C/6032-28 U/6032-15 W/7343-15 W/7343-15 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 C/6032-28 C/6032-28 L/6032-19 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 C/6032-28 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 T520D157M008A(1)E055 T520V157M008A(1)E040 T520A106M010A(1)E080 T520A156M010A(1)E080 T520A226M010A(1)E080 T520T336M010A(1)E040 T520T336M010A(1)E070 T520T336M010A(1)E080 T520B336M010A(1)E025 T520B336M010A(1)E035 T520B336M010A(1)E040 T520B336M010A(1)E070 T520U336M010A(1)E070 T520B476M010A(1)E035 T520B476M010A(1)E070 T520U476M010A(1)E055 T520C476M010A(1)E100 T520U686M010A(1)E055 T520W686M010A(1)E025 T520W686M010A(1)E040 T520C686M010A(1)E045 T520V686M010A(1)E025 T520V686M010A(1)E040 T520V686M010A(1)E045 T520V686M010A(1)E060 T520V686M010A(1)E100 T520D686M010A(1)E100 T520C107M010A(1)E025 T520C107M010A(1)E045 T520L107M010A(1)E025 T520W107M010A(1)E040 T520V107M010A(1)E018 T520V107M010A(1)E025 T520V107M010A(1)E045 T520V107M010A(1)E050 T520D107M010A(1)E018 T520D107M010A(1)E055 T520D107M010A(1)E080 T520C157M010A(1)E055 T520V157M010A(1)E018 T520V157M010A(1)E025 T520V157M010A(1)E040 T520D157M010A(1)E015 T520D157M010A(1)E018 T520D157M010A(1)E025 T520D157M010A(1)E040 T520D157M010A(1)E055 T520Y157M010A(1)E015 T520Y157M010A(1)E018 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 120 120 10 15 22 33 33 33 33 33 33 33 33 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 8 10 10 10 10 10 10 8 8 8 10 10 10 10 10 10 10 10 8 10 10 10 10 10 10 10 10 10 10 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 55 40 80 80 80 40 70 80 25 35 40 70 70 35 70 55 100 55 25 40 45 25 40 45 60 100 100 25 45 25 40 18 25 45 50 18 55 80 55 18 25 40 15 18 25 40 55 15 18 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 2000 2200 1200 1200 1200 1600 1200 1100 2300 1900 1800 1300 1400 1900 1300 1600 1300 1600 2700 2100 1900 2700 2200 2000 1800 1400 1500 2600 1900 2400 2100 3200 2700 2000 1900 3500 2000 1700 1700 3200 2700 2200 3900 3500 3000 2400 2000 4000 3700 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 12 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC µF KEMET/EIA (See below for part options) 10 10 10 10 10 10 10 10 10 10 10 10 10 11 12.5 12.5 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 25 25 25 150 220 220 220 220 220 220 330 330 330 330 330 330 47 10 15 10 22 33 33 33 33 47 47 47 47 47 68 150 22 22 22 15 15 15 Y/7343-40 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 Q/7343-12 T/3528-12 T/3528-12 B/3528-21 C/6032-28 W/7343-15 V/7343-19 V/7343-19 V/7343-19 W/7343-15 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 X/7343-43 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 T520Y157M010A(1)E025 T520V227M010A(1)E045 T520V227M010A(1)E025 T520D227M010A(1)E018 T520D227M010A(1)E025 T520D227M010A(1)E040 T520Y227M010A(1)E040 T520Y337M010A(1)E010 T520Y337M010A(1)E015 T520Y337M010A(1)E035 T520X337M010A(1)E010 T520X337M010A(1)E025 T520X337M010A(1)E040 T520Q476M011A(1)E040 T520T106M12RA(1)E150 T520T156M12RA(1)E080 T520B106M016A(1)E100 T520C226M016A(1)E080 T520W336M016A(1)E045 T520V336M016A(1)E045 T520V336M016A(1)E060 T520V336M016A(1)E070 T520W476M016A(1)E045 T520V476M016A(1)E045 T520V476M016A(1)E070 T520D476M016A(1)E035 T520D476M016A(1)E070 T520D686M016A(1)E050 T520X157M016A(1)E040 T520V226M020A(1)E040 T520V226M020A(1)E045 T520V226M020A(1)E090 T520V156M025A(1)E090 T520D156M025A(1)E060 T520D156M025A(1)E080 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes 150 220 220 220 220 220 220 330 330 330 330 330 330 52 13 19 16 35 53 53 53 53 75 75 75 75 75 109 240 44 44 44 38 38 38 µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum 25 45 25 18 25 40 40 10 15 35 10 25 40 40 150 80 100 80 45 45 60 70 45 45 70 35 70 50 40 40 45 90 90 60 80 mΩ @ 20°C 100 kHz Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Rated Sensitivity Temp (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 3100 2000 2700 3500 3000 2400 2500 4900 4000 2600 5000 3100 2500 4500 800 1100 1100 1400 2000 2000 1800 1600 2000 2000 1600 2500 1800 2100 2500 2200 2000 1400 1400 1900 1700 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2015_T520 • 10/3/2013 13 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Derating Guidelines 100% Voltage Rating Maximum Recommended Transient Voltage (1 ms – 1 µs) 90% 90% of VR VR 12.5 V ≤ VR ≤ 25 V 80% of VR VR Recommended Application Voltage < = 10 V 85% -55°C to 105°C 2. V ≤ VR ≤ 10 V Maximum Transient Voltage 95% % Rated Voltage Maximum Recommended Steady State Voltage 80% Recommended Application Voltage > 10 V 75% 70% 65% 60% VR= Rated Voltage 55% 50% -55 25 85 105 Temperature (°C) Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Power Dissipation T ≤ 45°C 1.00 45° C < T ≤ 85°C 0.70 85°C < T ≤ 125°C 0.25 KEMET Series and Case Code EIA Case Code T520T T520M T520A T520B T520U T520L T520C T520W T520V /T522V T520Q T520D T520Y/T522Y T520X T520H 3528–12 3528–15 3216–18 3528–21 6032–15 6032–19 6032–28 7343–15 7343–19 7343-12 7343–31 7343–40 7343–43 7360–20 Maximum Power Dissipation (P max) mWatts @ 45°C with +30°C Rise 105 120 112 127 135 150 165 180 187 170 225 241 247 187 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation(watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 14 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Reverse Voltage Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25°C 55°C 85°C 105°C 125°C* 15% of Rated Voltage 10% of Rated Voltage 5% of Rated Voltage 3% of Rated Voltage 1% of Rated Voltage *For series rated to 125°C Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Case A B C D L M H E1 Q R2 S2 T U V W X1 Y1 EIA 3216–18 3528–21 6032–25 7343–31 6032–19 3528–15 7360–20 7360–38 7343–12 2012–12 3216–12 3528–12 6032–15 7343–20 7343–15 7343–43 7343–40 Density Level A: Maximum (Most) Land Protrusion (mm) W 1.35 2.35 2.35 2.55 2.35 2.35 4.25 4.25 2.55 1.05 1.35 2.35 2.35 2.55 2.55 2.55 2.55 L 2.20 2.21 2.77 2.77 2.77 2.20 2.77 2.77 2.77 1.83 2.20 2.20 2.77 2.77 2.77 2.77 2.77 S 0.62 0.92 2.37 3.67 2.37 0.92 3.67 3.67 3.67 0.15 0.62 0.92 2.37 3.67 3.67 3.67 3.67 V1 6.02 6.32 8.92 10.22 8.92 6.32 10.22 10.22 10.22 4.82 6.02 6.32 8.92 10.22 10.22 10.22 10.22 Density Level B: Median (Nominal) Land Protrusion (mm) V2 2.80 4.00 4.50 5.60 4.50 4.00 7.30 7.30 5.60 2.50 2.80 4.00 4.50 5.60 5.60 5.60 5.60 W 1.23 2.23 2.23 2.43 2.23 2.23 4.13 4.13 2.43 0.93 1.23 2.23 2.23 2.43 2.43 2.43 2.43 L 1.80 1.80 2.37 2.37 2.37 1.80 2.37 2.37 2.37 1.50 1.80 1.80 2.37 2.37 2.37 2.37 2.37 S 0.82 1.12 2.57 3.87 2.57 1.12 3.87 3.87 3.87 0.22 0.82 1.12 2.57 3.87 3.87 3.87 3.87 V1 4.92 5.22 7.82 9.12 7.82 5.22 9.12 9.12 9.12 3.72 4.92 5.22 7.82 9.12 9.12 9.12 9.12 Density Level C: Minimum (Least) Land Protrusion (mm) V2 2.30 3.50 4.00 5.10 4.00 3.50 6.80 6.80 5.10 2.00 2.30 3.50 4.00 5.10 5.10 5.10 5.10 W 1.13 2.13 2.13 2.33 2.13 2.13 4.03 4.03 2.33 0.83 1.13 2.13 2.13 2.33 2.33 2.33 2.33 L 1.42 1.42 1.99 1.99 1.99 1.42 1.99 1.99 1.99 1.12 1.42 1.42 1.99 1.99 1.99 1.99 1.99 S 0.98 1.28 2.73 4.03 2.73 1.28 4.03 4.03 4.03 0.38 0.98 1.28 2.73 4.03 4.03 4.03 4.03 V1 4.06 4.36 6.96 8.26 6.96 4.36 8.26 8.26 8.26 2.86 4.06 4.36 6.96 8.26 8.26 8.26 8.26 V2 2.04 3.24 3.74 4.84 3.74 3.24 6.54 6.54 4.84 1.74 2.04 3.24 3.74 4.84 4.84 4.84 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 15 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Soldering Process Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds 3°C/seconds maximum Ramp-up Rate (TL to TP) 3°C/seconds maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 60 – 150 seconds Peak Temperature (TP) 220°C* 235°C** 250°C* 260°C** 20 seconds maximum 30 seconds maximum 6°C/seconds maximum 6°C/seconds maximum 6 minutes maximum 8 minutes maximum Time within 5°C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) Time 25°C to Peak Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3ºC/seconds Maximum Ramp Down Rate = 6ºC/seconds tL Tsmax Tsmin 25 tS 25ºC to Peak Time Construction Polymer /Ta2O5/Ta Silver Adhesive Silver Paint Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 16 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Capacitor Marking (KO) KEMET Organic Polymer KO Rated Voltage 476 16 K 230 Date Code * Polarity Indicator (+) 1st digit = Last number of Year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year Picofarad Code KEMET ID Date Code* * 230 = 30th week of 2012 Rated Voltage Date Code* KO C6 Date Code* Polarity Indicator (+) 476 K 16V (KO) KEMET Organic Polymer Year KEMET ID Picofarad Code 49 Internal Code Month X = 2009 1 = Jan 7 = Jul A = 2010 2 = Feb 8 = Aug B = 2011 3 = Mar 9 = Spt C = 2012 4 = Apr O = Oct D = 2013 5 = May N = Nov E = 2014 6 = Jun D = Dec Date Code * Polarity Indicator (+) E jA8 *Date Code Voltage and Capacitance Code Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2013 A B C D E F G H J K L M 2014 N P Q R S T U V W X Y Z 2015 a b c d e f g h j k l m 2016 n p q r s t u v w x y z Code e g j A Rated Voltage 2.5 V 4V 6V 10 V Code J7 N7 S7 W7 A8 N8 Capacitance 22 33 47 68 100 330 Storage All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classified as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 17 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Tape & Reel Packaging Information KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. 8 mm (0.315") or 12 mm (0.472") Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 180 mm (7.0") or 330 mm (13.0") Table 3 – Packaging Quantity Case Code KEMET R I S T M U L W Z Q V A B C D Y X E/T428P H EIA 2012-12 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-12 7343-19 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7360-38 7360-20 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 12 12 12 12 12 12 8 8 12 12 12 12 12 12 2,500 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 1,000 10,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 3,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. * A case with black epoxy only available in 7" reel © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 18 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØDo Po [10 pitches cumulative tolerance on tape ± 0.2 mm] E1 Ao F Ko B1 E2 Bo S1 W P1 T1 Center Lines of Cavity ØD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 ±0.10 (0.069 ±0.004) 4.0 ±0.10 (0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) R Reference Note 2 25.0 (0.984) 30 (1.181) S1 Minimum Note 3 0.600 (0.024) T Maximum T1 Maximum 0.600 (0.024) 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) B1 Maximum Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 ±0.05 (0.138 ±0.002) 5.5 ±0.05 (0.217 ±0.002) 5.5 ±0.05 (0.217 ±0.002) 4.0 ±0.10 (0.157 ±0.004) 8.0 ±0.10 (0.315 ±0.004) 8.0 ±0.10 (0.315 ±0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–1, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481–1 for standards relating to more precise taping requirements. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 19 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8,12 16 – 200 Bo Maximum Rotation ( 20 10 ° T) Typical Component Centerline Ao Figure 3 – Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum 16 mm Tape ° s Tape Maximum Width (mm) Rotation ( 8,12 20 16 – 56 10 72 – 200 5 ° S) Figure 4 – Bending Radius Embossed Carrier Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com R T2015_T520 • 10/3/2013 20 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (Ø 40 mm minimum) flange distortion at outer edge) W2 (Measured at hub) D A (See Note) N C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 21 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Components 100 mm Minimum Leader 400 mm Minimum Top Cover Tape Figure 7 – Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 22 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop’s Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 23 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Other KEMET Resources Tools Resource Location ConfigureAPart:CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 24 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 10/3/2013 25