BAUTEILE / FERTIGUNGSHINWEISE TECHNISCHE SKIZZE / Technical sketch Kabeltülle Kabelaufdruc k (B sp.) C able sleeve C able imprint (e.g.) E R N I A rt .N r. Piece parts / Manufacturing notices Kabeltülle Production date e.g.: KW42 2006 - Kabelaufdruck mittels Tintenstrahldrucker entspr. Techn. Skizze C able sleeve Cable imprint with ink-jet printer see technical sketch - Gute Chemikalien- und Ölbeständigkeit (Ölbeständigkeit gilt nicht für den Einsatz mit PVC-Kabel). Beim Einsatz aggressiver Medien ist die Materialbeständigkeit applikationsbezogen zu überprüfen. 15 P a rt N o . Good chemical and oil resistance (parts with PVC-cable are not restistant). When using agressive media, material resistance based on application must be checked. ERNI XXXXXX PUR 8x0.25 422006 47,5 STROMLAUFPLAN / Schematic diagram see table 47,5 1 2 5 5 6 4 View: mating face male; pin assignment 3 8 2 4 Ansicht: Steckgesicht Messer; Kontaktbelegung / M 2:1 7 3 6 4 3 8 2 1 5 7 6 1 7 8 Artikel-Nr. Leitungslänge (A) Part No. Cable length (A) SPECIFICATIONS Circular Connector Standard applic. Value Electrical Data Standard applic. Value IEC 61-076-2-101 30 V DC Housing: M12 male, straight, black M12 male, straight black Rated (nominal) voltage; max. Rated current; per contact, max. IEC 61-076-2-101 2A Pin assignment: 8 pin Rated impulse voltage 0,8 kV Coding: Connection: A-coding Screw locking pluggable, screw locking, A/F 13 recommended breakaway torque 0,6 Nm LED: - Packaging: 1 piece per bag (mated and locked) 1.500 +100 mm [59.05 +4 in] IEC 60529 Pollution degree b) female Standard description CuZn39Pb3F50 - Contact finish, mating zone: 3 IEC 60664-1 a) male Thickness of plating b) female Thickness of plating 0,5 µm Au over 2 µm Ni - Screw material: Standard description Zinc pressure die casting Screw plating: Standard description Ni 4-6 µm Yes Jacket color Conductor cross-section gray ( RAL 7001 ) 8 x 0,25 mm 2 Bending radius min. 15 x jacket diameter required Company Logo required Date of manufacturing required Jacket material required Flex. conductor diameter required Transmissinon Characteristics IEC 11801 Cable (additional info see table) flexible conductor brown Litze grün flexible conductor green Litze gelb flexible conductor yellow Litze grau flexible conductor gray Litze pink flexible conductor pink Litze blau flexible conductor blue Litze rot flexible conductor red Schirm shield KupferKabelmantel gewicht Außendurchmesser Copper weight Jacket material Jacket diameter PUR, shielded 7 mm 5% [0.263 in 5%] Aderisolation Wire isolation Class D 1 2 3 4 5 6 7 8 Zul. Temp.-Bereich für Kabel Permissable temp. for cable 26,6 g PP -40... +80 °C (permanently installed) -20... +80 °C (movably mounted) 3.000 + 100 mm [118,11 +4 in] I Part Marking (cable imprint) Part number Litze braun 2.000 +100 mm [78,74 +4 in] IP 65/67 Contact material: Standard description 500 +50 mm [23.62 +2,4 in] flexible conductor white 1.000 +100 mm [39.37 +4 in] Protection class RoHS compliant a) male 464933 Approvals Insulation category Materials & Finish IEC 61-076-2-101 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Technical Specifications Litze weiss Tolerances Information: 1:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. M12 8 pin / M12 m 8 pin Male, A-coding, shielded 324227 www.ERNI.com 16.08.2012 Index Date Class CCCS I A3