32,22 ±0,20 1,269 ±0,008 14,89 0,586 21,59 0,850 MAX 0,38 ±0,10 0,015 ±0,004 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT TOP OF PCB LP 31,12 1,225 8 LED 2 1 LED 1 8 13,80 0,54 1 3,05 ±0,50 0,12 ±0,020 13,97 0,550 NOTE 1: ONE REAR SHIELD TAB CENTERED NOTE 2: SIDE GROUND TAB REAR OF PEG 3.05 mm (R) NOTE 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) NOTE 4: RoHS COMPLIANT 10,89 0,429 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn MATTE LED LENS: EPOXY OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 25,40 ±0,13 1,000 ±0,005 NO. IDENT. NR. LED 2 LEFT LED 2 LINK LED 1 RIGHT LED 1 RECHTE LED CODE 203306 YELLOW GREEN L1 203307 GREEN YELLOW L2 203308 GREEN GREEN L3 203309 GREEN RED L4 203310 ORANGE/GREEN ORANGE/GREEN L9 Tolerances Information: SCHEMATIC NO: M5B01 Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C10T, 1x2, INT. MAG., LED ALIGNED 203305 www.ERNI.com B 05.02.2007 Index Date Class MJIM I (1/2) A3 RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENES LEITERPLATTEN-LAYOUT - BESTÜCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED ELECTRICAL SCHEMATICS 1000 BASE T - M5B01 ELEKTRISCHER SCHALTPLAN 0,89 ±0,07 0,035 ±0,003 x 20 TD1+ P3 J3 MX1+ 1,60 ±0,07 0,063 ±0,003 x 3 TD1- P6 J6 MX1- TD2+ P4 J4 MX2+ TD2- P5 J5 MX2- TD3+ P7 J7 MX3+ TD3- P8 J8 MX3- 11,43 0,450 1,27 0,050 2,73 0,107 1 1 10 3,25 ±0,07 0,128 ±0,003 x 2 1,02 ±0,07 0,040 ±0,003 x 8 10 11 12 11 12 13 13 14 2,73 0,107 14 2,54 0,100 0,76 0,030 1000pF/2KV VCC P9 10,16 0,400 J2 MX0- 2,54 0,100 3,05 0,120 TD0- P2 12,70 0,500 2,54 0,10 J1 MX0+ 4,06 0,160 4x 75 Ω TD0+ P1 2,29 0,090 4x 0.01 µF CABLE 8,89 0,350 25,40 1,000 PCB 9,65 0,380 13,21 0,520 GND P10 23,62 0,930 LED SPECIFICATIONS LED ANWEISUNG COLOR FARBE Vf TYP Vf MAX If mA YELLOW 2.1 2.5 20 11 12 13 14 GREEN 2.2 2.5 20 11 12 13 14 RED 2.25 2.5 20 11 12 13 14 ORANGE/GREEN 2.05/2.2 2.5 20 11 12 G 13 14 G N N MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: 1CT:1CT ±3% OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN INSERTION LOSS: ISOLATION -1.1 dB MAX -18 dB MIN -14 dB MIN -12 dB MIN -10 dB MIN -35 dB TYP -50 dB TYP -40 dB TYP -35 dB TYP 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1-100 MHz RETURN LOSS: 1-40 MHz 60 MHz 80 MHz 100 MHz CROSSTALK: 1-100 MHz CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz Information: Tolerances Scale CIRCUIT DIAGRAM SCHALTSKIZZE 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C10T, 1x2, INT. MAG., LED ALIGNED 203305 www.ERNI.com Class MJIM I (2/2) A3