RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14,89 0,59 21,59 0,85 0,38 0,01 ±0.10 MAX 32,22 ±0,20 1,27 ±0,01 TOP OF PCB LP LED 2 8 1 LED 1 8 13,80 0,54 1 3,05 ±0,50 0,12 ±0,02 31,12 1,23 13,97 0,55 Note 1: Modular Jack with 1000Base-T magnetics, compliant to IEEE 802.3ab standards; optimized for use with voltage driven Gigabit PHY (i.e. VITESSE) Note 2: RoHs compliant Note 3: Compatible to lead-free wave soldering process Note 4: One rear shield tab centered Note 5: Side ground tab rear of PEG 3.05 mm (R) Note 6: Panel ground flanges both sides, bottom and top (GF5) 10,89 0,43 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn matte LED LENS: EPOXY OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 25,40 ±0,13 1,00 ±0,01 NO. IDENT. NR. LED 2 LEFT LED 2 LINKS LED 1 RIGHT LED 1 RECHTS LED CODE 203373 GREEN GREEN L3 Tolerances Information: ±0,2 mm (±0,008 inch) if not specified SCHEMATIC NO: M5E03 Scale in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD-JACK-MJIM 8C10T,1x2,INT.MAG.,LED ALIGNED 203522 www.ERNI.com Index 1:1 All Dimensions Date Class MJIM I (1/2) A3 RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED ELECTRICAL SCHEMATICS 1000 BASE T - M5E03 30,990 1,22 ELEKTRISCHES DIAGRAMM 12,70 0,50 0,89 J3 MX1+ TD1+ P4 TD1- P5 J6 MX1- TD2+ P6 J4 MX2+ TD2- P7 J5 MX2- TD3+ P8 J7 MX3+ TD3- P9 J8 MX3- ±0,07 1,60 ± 0,07 0,04 ±0,00 0,06 ±0,00 3,25 ±0,07 0,13 ±0,00 1,0 4 7 0,0 2 ±0,0 ±0,00 1,27 0,05 2,73 0,11 X 20 1 X3 3 2 5 4 7 6 1 9 8 10 X2 X8 3 2 5 4 7 6 9 8 6,350 0,25 J2 MX0- TD0- P3 2,54 0,10 11,43 0,45 10 11 12 13 13 14 11 12 14 0,76 0,03 1000pF/2KV 10,250 0,40 J1 MX0+ TD0+ P2 GND P1 25,40 1,00 CABLE 2,54 0,10 Ohm 3,05 0,12 4X 75 4,06 0,16 4X 0.01 µF 2,29 0,09 PCB 2,540 0,10 13,970 CHASSIS GND P10 12,950 0,51 DESIGNED FOR IEEE802.3ab GIGABIT APPLICATION OPTIMIZED FOR VOLTAGE DRIVEN OUTPUTS MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: LED SPECIFICATIONS 1CT:1CT ±3% OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN INSERTION LOSS: ISOLATION -1.1 dB MAX -18 dB MIN -14 dB MIN -12 dB MIN -10 dB MIN -35 dB TYP -50 dB TYP -40 dB TYP -35 dB TYP 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1-100 MHz RETURN LOSS: 1-40 MHz 60 MHz 80 MHz 100 MHz CROSSTALK: 1-100 MHz CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz COLOR FARBE Vf Vf TYP MAX If mA GREEN 2.2 2.5 10 Tolerances Dimension Nr. Scale ±0,2 mm (±0,008 inch) if not specified All Dimensions in mm Date Name Drawn 23.08.2010 Krammer Checked 01.09.2010 Blind Approved Date Name 13 14 Tool-Nr.: Designation MOD-JACK-MJIM 8C10T, 1x2, INT. MAG., LED ALIGEND 203522 Electronics GmbH Modification Nr. 11 12 Material D-73099 ADELBERG Index 2:1 CIRCUIT DIAGRAM SCHALTSKIZZE Class MJIM (2/2) A3