RECOMMENDED PANEL CUTOUT 16,66 0,656 14,72 0,580 21,59 0,850 MAX 0,38 ±0,10 0,015 ±0,004 EMPFOHLENER FRONTPLATTEN AUSSCHNITT PCB EDGE LP 1 8 L.E.D. 1 13,63 0,537 L.E.D. 2 3,05 ±0,50 0,120 ±0,020 15,88 0,625 10,89 0,429 11,43 ±0,13 0,450 ±0,005 NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTOM (GF5) NOTE 3: PIN 7 PAD TO BE UNDERSIZED TO MEET ISOLATION REQUIREMENT NOTE 4: RoHS COMPLIANT; PRINT "RC" WITH DATE CODE MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin), OVER Ni TERMINAL FINISH: Sn MATTE LED LENS: EPOXY MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS OPERATING TEMPERATURE: 0°C TO 55°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. SHIELDING: Cu ALLOY, PLATED WITH Ni Information: SCHEMATIC NUMBER: M6A01 PART NO. IDENT. NR. LED 2 LEFT LED 2 LINK LED 1 RIGHT LED 1 RECHTE LED CODE 203318 YELLOW GREEN L1 203319 GREEN YELLOW L2 203320 GREEN GREEN L3 203321 GREEN RED L4 203322 ORANGE/GREEN ORANGE/GREEN L9 Tolerances Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C10T, 1x1, INT. MAG., LED ALIGNED 203317 www.ERNI.com D 11.01.2008 Index Date Class MJIM I (1/2) A3 ELECTRICAL SCHEMATIC - M6A01 10/100 BASE TX WITH REMOTE POWER ELEKTRISCHER SCHALTPLAN PCB CABLE TD+ P1 J1 TX+ CT P4 TD- P2 J2 TX- RD+ P3 J3 RX+ CT P5 RD- P6 J6 RX2X 1000pF/2KV GND P7 2X 75 Ω N/C P8 PW+ P9 PW- P10 J4,5 J7,8 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 1,27 0,050 0,64 0,025 2,54 0,100 1 0,89 ±0,07 0,035 ±0,003 x10 10 8,18 0,322 8,89 0,350 14 12 4,06 0,160 1,02 ±0,07 0,040 ±0,003 x4 13 11 3,05 0,120 3,25 ±0,07 0,128 ±0,003 x2 2,54 0,100 1,60 ±0,07 0,063 ±0,003 x2 11,43 0,450 13,26 0,522 15,49 0,610 LED SPECIFICATIONS LED ANWEISUNG MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: 1CT : 1CT ±3% (P1-P2 : J1-J2) COLOR FARBE V f TYP Vf MAX If mA YELLOW 2.1 2.5 20 11 12 13 14 GREEN 2.2 2.5 20 11 12 13 14 RED 2.25 2.5 20 11 12 13 14 12 13 14 ORANGE/GREEN 2.05/2.2 2.5 20 CIRCUIT DIAGRAM SCHALTSKIZZE (P3-P6 : J3-J6) OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN 0.9 OHMS MAX -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz 40 MHz 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -38 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -30 dB TYP ISOLATION 1500 Vrms 11 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. DCR (P1-P2, P3-P6) INSERTION LOSS: 0.1-100 MHz Information: Tolerances Scale G G N N 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C10T, 1x1, INT. MAG., LED ALIGNED 203317 www.ERNI.com Class MJIM I (2/2) A3