RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 7 x 1,27 = (8,89 0,350 ) 3,18 0,125 TOP OF PCB LP 12,25 min. 0,10 0,004 MAX 16,24 min. 0,76 0,030 15,74 0,620 11,43 ±0,25 0,450 ±0,010 2,50 +0,25 0,00 0,098 11,75 0,463 8 +0,010 0,000 1 8 3,30 ±0,25 0,130 ±0,010 x2 1,60 ±0,25 0,063 ±0,010 x2 2,97 0,117 18,67 0,735 0,1 0,10 0,004 1 11,47 0,452 1,27 0,050 11,43 0,450 15,54 0,612 2,97 0,117 8,13 0,320 IMPROVED CONTACT DESIGN (PRE BEND) NOTE 1: WITH PEGS, SIDE GROUNDING PINS AND SMT TERMINALS NOTE 2: RoHS COMPLIANT Technical specifications Standard applic. Standard description Standard description Thickness of plating Thickness of plating Standard description Asse mbly pro ce ss Packaging Solder temperature Suitable assembly process Appro vals UL insulation body UL File No. RoHS compliant Value PA46 CuSn5 30 µin Au over 50 µin Ni Flash Au over 50 µin Ni C2680 (acc. JIS) 50 µin Ni / 80 µin Sn Tray 235°C at 3-5s wave UL 94 V0 E145613 Yes T e st Dat a St andard applic. Mechanical pro pe rtie s Insertion/withdrawal force IEC 603-7 max. Mechanical operations IEC 512-5, 9a min. Effectiveness of connector coupling device IEC 512-8, 15f Ele ct rical pro pe rtie s Cre e page / cle arance dist ance s a) Contact - contact IEC 807-3 b) Contact - shell IEC 807-3 Vo lt age proo f (Die le ctric Withstand Vo ltage ) a) Contact - contact IEC 512-2, 4a min. b) Contact - shell/testpanel IEC 512-2, 4a min. Current carrying capacity IEC 512-3, 5b Contact resistance IEC 512-2, 2a max. Insulation resistance IEC 512-2, 3a min. Enviro nme ntal pro pe rties Operation temperature 133602 203490 Value 20 N 1.000 50 N 0,52 mm min. 1,0 mm 1.000 V AC/DC 1.500 V AC/DC 1,5 A @ 25° C 30 mOhm 500 MOhm 0 - 70° C Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate rials & Finish Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin PACKAGING VERPACKUNG PART NO. IDENT. NR. TRAY (Standard) (SEE PAGE 2 of 2) TAPE & REEL (SEE PAGE 2 of 2) 120 PIECES PER REEL 2:1 Scale Tolerances Information: MAXCONN No.: SEE CHART All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 8P8C, 1X1, SMT, CAT 3/4 203491 www.ERNI.com c 08.06.2015 Index Date Class MJ I (1/2) A3 TAPE AND REEL INFORMATION 120 CONNECTORS PER REEL 50,00 1,969 Section B-B A 20,20 0,795 R0 ,3 0 B 6 B R0 15,90 0,626 16,10 0,634 1,35 0,053 28,00 1,102 4 1,35 0,053 ROLL DIRECTION 0,05 ,30 0,0 13,00 0,512 330 1:1 RO LL DI RE CT IO N 203490 TAPE & REEL PACKAGE 12 Detail "A" M 5:1 R (T YP ) 5 0, 7 0, 0 30 NOTE 1: 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2 NOTE 2: CAMBER NOT TO EXCEED 1 mm IN 100 mm NOTE 3: MATERIAL: CLEAR ADVANTEK POLYSTYRENE NOTE 4: MEASURED ON A PLANE 0,3 MM ABOVE THE BOTTOM OF THE POCKET NOTE 5: MEASURED FROM A PLANE ON THE INSIDE BOTTOM OF THE POCKET TO THE TOP SURFACE OF THE CARRIER 133602 TRAY PACKAGE NOTE 6: POKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET; NOT POCKET HOLE Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 5 12,40 0,488 0,20 0,008 "A" 5,00 0,197 12,40 0,488 A 0,3 4,00 0,157 ROLL DIRECTION 44,00 1,732 1 0,15 2,00 0,079 1,75 0,069 6 1 0,0 12 m 1, 5 0 +0 ,1 0,05 ax . 0,40 0,016 0, 0 59 +0 ,1 Section A-A 2:1 Scale Tolerances Information: All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 8P8C, 1X1, SMT, CAT 3/4 203491 www.ERNI.com c 08.06.2015 Index Date Class MJ I (2/2) A3