RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT x8 2 1 8 5 7 11,43 0,45 2,54 0,1 Top of pcb 11,75 0,463 15,54 0,612 1,70[0,067] 8 6 2,97 0,117 18,65 0,734 3,2 ±0,25 0,126 ±0,010 1 3 x2 0,128 3,25 2 x ] 3 ,06 1,60[0 1,27 x 7 = 8,89[0,035] 15,74 4 12,67 0,499 0,035 16,66 0,656 8,89 0,35 0,89 0,38 ±0,10 0,015 ±0,004 2,54 0,1 8,89 0,35 1,27 0,05 2,97 0,117 11,43 0,45 8,89 0,35 NOTE 1: PANEL GROUND FLANGES BOTH SIDES AND BOTTOM NOTE 2: SIDE SHIELDING TAPS IN FRONT 8,13 0,32 IMPROVED CONTACT DESIGN (PRE BEND) Technical specifications Standard applic. Standard description Standard description Thickness of plating Thickness of plating Standard description Assembly process Packaging Solder temperature Suitable assembly process Approvals UL insulation body UL File No. RoHS compliant Value PBT 30% C5210 (acc. JIS) see chart 80 µin matte Sn over 50 µin Ni C2680 (acc. JIS) 50 µin Ni / 80 µin Sn Tray 235°C at 3-5s wave UL 94 V0 E145613 Yes Te st Data Standard applic. Mechanical pro pe rties Insertion/withdrawal force IEC 603-7 max. Mechanical operations IEC 512-5, 9a min. Effectiveness of connector coupling device IEC 512-8, 15f Electrical properties Cre epage / cle arance distance s a) Contact - contact IEC 807-3 b) Contact - shell IEC 807-3 Voltage pro of (Diele ctric Withstand Vo ltage) a) Contact - contact IEC 512-2, 4a min. b) Contact - shell/testpanel IEC 512-2, 4a min. Current carrying capacity IEC 512-3, 5b Contact resistance IEC 512-2, 2a max. Insulation resistance IEC 512-2, 3a min. Enviro nmental properties Operation temperature Value 20 N 1.000 50 N 0,52 mm min. 1,0 mm 1.000 [V AC/DC] 1.500 [V AC/DC] 1.5 [A] @ 25° C 30 [mOhm] 500 [MOhm] 0 - 70° C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mat erials & Finish Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin Tolerances Information: Scale Part No. Ident-Nr. Contact finish Oberflächenbehandlung 133269 30µm Au over 50µm Ni 2:1 Fraction Decimals Angles X ±0.50 X.X ±0.38 X.XX ±0.25 X.XXX ±0.10 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. ± 1° All Dimensions in mm Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 1x1, 8P8C, SHIELDED 133840 www.ERNI.com d 14.11.2014 Index Date Class MJIM I (1/1) A3