RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 0,76 0,030 11,47 0,452 TOP OF PCB LP 1,27 0,050 15,74 0,620 8 3,30 ±0,07 0,130 ±0,003 X2 1,60 ±0,07 0,063 ±0,003 X2 2,97 0,117 8 11,43 0,450 1 18,67 0,735 11,75 0,463 1 3,18 [,125] 7 X 1,27 = 8,89 0,350 12,67 0,499 0,38 0,015 MAX 16,66 0,656 2,50 +0,30 0,00 0,098 +0,012 0,000 11,43 0,450 15,54 0,612 8,13 0,320 IMPROVED CONTACT DESIGN (PRE BEND) T e chnical sp e cif icat io ns Stand ard ap p l i c. Standard description Standard description Thickness of plating Thickness of plating Standard description Thickness of plating A sse mb l y p ro ce ss Packaging Solder temperature Suitable assembly process A p p ro val s UL insulation body UL File No. RoHS compliant UL 94 Val ue T e st Data Stand ard ap p l i c. Val ue PA46 30% Me ch ani c al p ro p e rti e s C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni El e ctri cal p ro p e rti e s Cre e p ag e / cl e arance d i stanc e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 260°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi th stan d Vo l tag e ) reflow a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes Envi ro nme ntal p ro p e rti e s Operation temperature -40°C to +85°C NOTE 1: WITH PEGS, SIDE GROUNDING PINS AND SMT TERMINALS NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) NOTE 3: RoHS COMPLIANT Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & F i ni sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Shell/shield plating Tolerances Information: Fraction Decimals X ±0.50 X.X ±0.38 X.XX ±0.25 X.XXX ±0.10 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Scale 21.10.2010 Index Date 2:1 Angles ± 1° All Dimensions in mm [in] Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 8P8C, 1X1 SMT 133288 www.ERNI.com c 1:1 Class MJ (1/1) A3