RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 14,89 0,586 0,38 ±0,10 0,015 ±0,004 21,27 0,837 87,95 ±0,20 3,463 ±0,008 TOP OF PCB LP 87,00 3,425 8 1 8 1 8 1 8 1 8 1 8 13,60 0,535 1 3,40 ±0,30 0,134 ±0,012 5 X 13.97 = (69,85 2,750 ) 81,28 ±0,13 3,200 ±0,005 NOTE NOTE NOTE NOTE T e chnical sp e cif icat io ns Stan d ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description Asse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process Ap p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val ue T e st Data Stand ard ap p l i c . Val u e PBT 30% Me c h an i c al p ro p e rti e s C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri c al p ro p e rti e s Cre e p ag e / c l e aran c e d i stan c e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi th stan d Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes Env i ro n me ntal p ro p e rti e s Operation temperature 0 - 70° C 1: SIDE GROUNDIND PINS IN FRONT (3,68 mm) 2: REAR GROUNDING PINS BETWEEN EVERY PORT (T) 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) 4: RoHS COMPLIANT TRANSMISSION REQUIREMENT ÜBERTRAGUNGSANFORDERUNG PART NO. IDENT. NR. 133222 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & F i n i sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin IMPROVED CONTACT DESIGN (PRE BEND) 10,89 0,429 CONTACT FINISH OBERFLÄCHENBEHANDLUNG CATEGORY 5 0,8µm Au [30µin], OVER Ni Scale Tolerances Information: 2:1 All Dimensions in mm[in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1x6, CAT 5 133868 www.ERNI.com b 07.05.2015 Index Date Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 80,01 3,150 68,58 2,700 66,04 2,600 54,61 2,150 52,07 2,050 40,64 1,600 38,10 1,500 26,67 1,050 24,13 0,950 2,54 0,100 8,89 0,350 10,16 0,400 1 1 8 8 8 1 8 1 8 1 8 1 0,89 ±0,07 0,035 ±0,003 x48 1,27 0,050 3,25 ±0,07 0,128 ±0,003 x2 2,54 0,100 1,60 ±0,07 0,063 ±0,003 x7 3,68 0,145 2,73 0,107 2,73 0,107 81,28 3,200 1:1 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 10,16 0,400 12,70 0,500 Scale Tolerances Information: 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1x6, CAT 5 133868 www.ERNI.com b 07.05.2015 Index Date Class MJ I (2/2) A3