RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 0,38 ±0,10 0,015 ±0,004 TOP OF PCB LP 14,89 0,586 21,59 0,850 87,95 ±0,20 3,463 ±0,008 1 8 1 8 1 8 1 8 1 8 1 8 4,10 ±0,30 0,161 ±0,012 13,80 0,543 87,00 3,425 5 X 13.97 = (69,85 2,750 ) IMPROVED CONTACT DESIGN (PRE BEND) 10,89 0,429 81,28 ±0,13 3,200 ±0,005 NOTE NOTE NOTE NOTE NOTE PART NO. IDENT. NR. T e chnical sp e cif icat io ns Stand ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process Ap p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val u e T e st D ata Stan d ard ap p l i c . Val u e PBT 30% Me c h ani c al p ro p e rti e s C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri c al p ro p e rti e s Cre e p ag e / c l e aran c e d i stan c e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi thstan d Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes En v i ro n me n tal p ro p e rti e s Operation temperature 0 - 70° C TRANSMISSION REQUIREMENT ÜBERTRAGUNGSANFORDERUNG 133221 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & F i n i sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin 1: SIDE SHIELD PINS IN FRONT (3,68mm) 2: ONE REAR GROUNDING PIN CENTERED 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) 4: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS 5: RoHS COMPLIANT CATEGORY 5 Scale Tolerances Information: 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X6 133869 www.ERNI.com b 07.05.2015 Index Date Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 80,01 3,150 66,04 2,600 52,07 2,050 40,64 1,600 38,10 1,500 2,54 0,100 8,89 0,350 10,16 0,400 9 0 ,8 1 1 8 8 8 1 8 8 1 1 ,07 ±0 35 0 ,0 ,00 ±0 5± 3 ,2 8 0 X4 28 0 ,1 7 0,0 1,6 1 3 ,07 ±0 8 3 ,00 ±0 63 0 ,0 X2 3 ,00 ±0 X3 1,27 0,050 2,54 0,100 3,68 0,145 2,73 0,107 2,73 0,107 81,28 3,200 1:1 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 10,16 0,400 24,13 0,950 Scale Tolerances Information: 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X6 133869 www.ERNI.com b 07.05.2015 Index Date Class MJ I (2/2) A3