RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 0,38 ±0,10 0,015 ±0,004 TOP OF PCB LP 14,89 0,586 21,59 0,850 87,95 ±0,20 3,463 ±0,008 87,00 3,425 8 1 8 1 8 1 8 1 8 1 8 IMPROVED CONTACT DESIGN (PRE BEND) 13,80 0,543 1 3,20 ±0,30 0,126 ±0,012 5 X 13.97 = (69,85 2,750 ) 10,89 0,429 81,28 ±0,13 3,200 ±0,005 T e c hnical spe cif icat io ns Stand ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 E145613 Val ue T e st Data Stand ard ap p l i c . Val ue PBT 30% Me c hani c al p ro p e rti e s . C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 n 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri c al p ro p e rti e s Cre e p ag e / c l e aranc e d i stanc e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi thstand Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 VDC/VAC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 VDC/VAC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes Env i ro n me ntal p ro p e rti e s Operation temperature 0 - 70° C NOTE NOTE NOTE NOTE NOTE Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & F i ni sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin 1: SIDE SHIELD PINS IN FRONT (3,68mm) 2: REAR GROUNDING PINS BETWEEN EVERY OTHER PORT (P) 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) 4: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS 5: RoHS COMPLIANT 2:1 Scale Tolerances Information: All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X6, CATEGORY 5E 133785 www.ERNI.com b 25.11.2014 Index Date Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 80,01 3,150 68,58 2,700 66,04 2,600 52,07 2,050 40,64 1,600 38,10 1,500 24,13 0,950 2,54 0,100 8,89 0,350 10,16 0,400 9± 0 ,8 1 1 8 8 8 1 8 1 8 1 7 0,0 35 0 ,0 5± 3 ,2 8 3 ,00 ±0 7 0,0 1,6 1 0 X4 8 28 0 ,1 ,07 ±0 ,00 ±0 63 0 ,0 3 X2 ,00 ±0 3 X5 1,27 0,050 2,54 0,100 3,68 0,145 2,73 0,107 2,73 0,107 81,28 3,200 1:1 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 10,16 0,400 12,70 0,500 2:1 Scale Tolerances Information: All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X6, CATEGORY 5E 133785 www.ERNI.com b 25.11.2014 Index Date Class MJ I (2/2) A3