109,22 ±0,13 4,300 ±0,005 IMPROVED CONTACT DESIGN (PRE BEND) 115,06 4,530 28,50 1,122 MAX 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 8 3,20 ±0,30 0,126 ±0,012 8 25,50 1,004 MAX 7 X 13,97 [,550] = (97,79 3,850 ) 10,89 0,429 T e c hnical spe cif icat io ns Stan d ard ap p l i c . Val ue T e st Data Stand ard ap p l i c . Standard description PBT 30% Contact material Standard description C5210 (acc.JIS) Insertion/withdrawal force IEC 603-7 max. 20 N Contact finish, mating zone Thickness of plating 30 µin Au over 50 µinNi Mechanical operations IEC 512-5, 9a min. 1.000 Effectiveness of connector coupling device IEC 512-8, 15f 50 N Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni Shell/shield material Standard description C2680 (acc.JIS) Plating shield / shielding pin 50 µin Ni / 80 µin Sn Me c hani c al p ro p e rti e s Val ue Insulation body . El e c tri c al p ro p e rti e s Cre e p ag e / c l e aranc e d i stanc e s A sse mb l y p ro c e ss a) Contact - contact IEC 807-3 0,52 mm Packaging Tray b) Contact - shell IEC 807-3 min. 1,0 Solder temperature 235°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi thstand Vo l tag e ) Suitable assembly process wave a) Contact - contact IEC 512-2, 4a b) Contact - shell/testpanel IEC 512-2, 4a A p p ro v al s min. 1.000 V AC/DC min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b V0 Contact resistance IEC 512-2, 2a max. 30 mOhm UL File No. E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm RoHS compliant Yes UL insulation body UL 94 1,5 A @ 25° C Env i ro nme ntal p ro p e rti e s Operation temperature 0 - 70° C NOTE 1: NOTE 2: NOTE 3: NOTE 4: Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & Fi ni sh PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF9) GROUNDING PIN BETWEEN EVERY OTHER PORT [P] 3 SIDE GROUND TABS EACH SIDE, STAGGERED (S1) RoHS COMPLIANT 1:1 Scale Tolerances Information: All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X8, CATEGORY 5 133037 www.ERNI.com e 25.06.2014 Index Date Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 116,16 ±0,20 4,573 ±0,008 107,95 4,250 96,52 3,800 93,98 3,700 66,04 2,600 52,07 2,050 40,64 1,600 26,16 1,030 0,38 ±0,10 0,015 ±0,004 80,01 3,150 68,58 2,700 TOP OF PCB LP 38,10 1,500 2,54 0,100 1,27 0,050 10,16 0,400 8 8 1 1 0,128 ±0,00 3 X2 ±0,0 7 1 0,03 5 ±0,0 03 8 8 1 8 8 1 8 8 8 8 8 1 1 X 12 8 ±0 1 ,6 0 ,07 2,13 0,084 0 ,0 6 3 ,00 3 ±0 X10 2,13 0,084 2,79 0,110 2,79 0,110 109,22 4,300 1:1 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 4,57 0,180 ±0,07 8 8 1 0,89 3,25 8 1 1 11,40 0,449 8 1 1 8,89 0,350 8 1 1 2,54 0,100 1 1 5,85 0,230 9,15 0,360 2,54 0,100 12,70 0,500 15,46 0,609 17,19 0,677 24,13 0,950 1:1 Scale Tolerances Information: All Dimensions in mm[in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X8, CATEGORY 5 133037 www.ERNI.com e 25.06.2014 Index Date Class MJ I (2/2) A3