25,40 1,000 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT c RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 32,54 1,281 24,13 0,950 10,16 0,400 0,8 1 28,50 1,122 MAX 3 2 6 5 1 8 1 8 4,57 0,180 15,46 0,609 25,14 0,990 3,20 ±0,3 0,126 ±0,012 1 25,30 0,996 8 9,15 0,360 3 ,2 1 7 8 7 1 ,07 0 ,1 2 4 8 ±0 5 63 ±0 3 ,00 X7 1 6 ,00 3 ± 0,0 2 4 3 8 7 X2 25,40 1,000 2,13[0,084] 2,13[0,084] 2,79 0,110 3 6 2 8 5 ±0 5 0 1,6 7 0,0 2 17,19[0.682] 31,25 1,230 4 4 1 35 X3 11,40 0,449 6 2 3 0,0 2,54 0,100 5 9± 7 0,0 3 ,00 ±0 8,89 0,350 8 8 2,54 0,100 c 7 13,97 0,550 1,27 0,050 5,85 0,230 TOP OF PCB LP 2,54 0,100 26,16 1,030 0,38 ±0,10 0,015 ±0,004 12,70 0,500 2,79 0,110 4,57 0,180 2,54 0,100 5,85 0,230 8,89 0,350 11,40 0,449 IMPROVED CONTACT DESIGN (PRE BEND) c 10,89 0,429 12,93 0,509 T e chnical spe cif icat io ns Stand ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro ce ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val u e T e st Data Stand ard ap p l i c . Val ue PA66 Me c han i cal p ro p e rti e s . C5210 (acc.JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector SUS301 (acc.JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri cal p ro p e rti e s Cre e p ag e / c l e aranc e d i stanc e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e ctri c Wi thstand Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes En vi ro nme ntal p ro p e rti e s Operation temperature 0 - 70° C 1:1 NOTE 1: RoHS COMPLIANT Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & Fi ni sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin Tolerances Information: Fraction Decimals ±0.50 X X.X ±0.38 X.XX ±0.25 X.XXX ±0.10 Scale 2:1 Angles ± 1° All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD - JACK - MJD 8P8C, 2X2 CAT 5 133052 www.ERNI.com d 17.06.2014 Index Date Class MJ I (1/1) A3