RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 109,22 ±0,13 4,300 ±0,005 21,59 0,850 MAX 0,38 ±0,1 0,015 ±0,004 115,95±0,2 4,565 ±0,008 TOP OF PCB LP 14,89 0,586 1:1 114,94 4,525 8 1 8 1 8 1 8 1 8 1 8 1 8 1 8 13,80 [0,543] MAX 1 3,20 ±0,3 0,126 ±0,012 7 X 13,97 [,550] 97,79 = 3,850 10,89 0,429 NOTE NOTE NOTE NOTE SIDE GROUND TABS IN FRONT OF PEG 3,68mm(F2) ONE REAR GROUND TAB CENTERED PANEL GROUND FLAN GES BOTH SIDES AND TOP (GF5) RoHS COMPLIANT PART NO. IDENT. NR. T e chnical spe cif icat io ns TRANSMISSION REQUIREMENT ÜBERTRAGUNG ANFORDERUNG 133214 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & Fi ni sh Stan d ard ap p l i c . Val u e T e st D ata Stan d ard ap p l i c . Val u e Insulation body Standard description PBT 30% Me ch an i c al p ro p e rti e s . Co ntact mate ri al Standard de scripti o n C5210 (acc. JIS) Inse rtio n/withdrawal fo rce IEC 603-7 max. 20 N Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni Effectiveness of connector Standard de scripti o n C2680 (acc. JIS) 50 N She ll/ shie ld mate ri al co upling de vi ce IEC 512-8, 15f Shell/shield plating Thickness of plating 50 µin Ni El e c tri c al p ro p e rti e s Cre e p ag e / c l e aran c e d i stan ce s A sse mb l y p ro c e ss a) Contact - contact IEC 807-3 0,52 mm P ackaging mi n. 1,0 mm T ray b) Co ntact - she ll IEC 807-3 235°C at 3-5s So lde r te mpe rature Vo l tag e p ro o f (Di e l e c tri c Wi th stan d Vo l tag e ) Suitable asse mbly pro ce ss wave a) Co ntact - co ntact IEC 512-2, 4a min. 1. 000 V AC/ DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC A p p ro v al s Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C UL insulati o n bo dy IEC 512-2, 2a max. 30 mOhm UL 94 V0 Co ntact re si stance E145613 Insulati o n re si stance IEC 512-2, 3a UL File N o . min. 500 MOhm Ro HS co mpli ant Yes En v i ro n me n tal p ro p e rti e s Ope rati o n te mpe rature 0 - 70° C 1: 2: 3: 4: CATEGORY 3/4 Tolerances Information: Scale 2:1 All Dimensions in mm[in] Designation All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. - 05.07.2007 Index Date Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X8 133214 www.ERNI.com Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 107,95 4,250 93,98 3,700 80,01 3,150 66,04 2,600 54,61 2,150 52,07 2,050 38,10 1,500 2,54 0,100 8,89 0,350 24,13 0,950 10,16 0,400 9 0,8 10,16 0,400 8 1 8 1 8 1 8 8 1 8 1 1 8 1 35 0,0 ,07 ±0 5 3,2 8 1 7 0,0 3 ,00 ±0 ,07 ±0 63 0,0 4 X6 28 0,1 3 ,00 ±0 3 ,00 ±0 X3 X3 0± 1,6 1,27 0,050 2,73 0,107 2,73 0,107 109,22 4,300 1:1 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 3,68 0,145 2,54 0,100 Tolerances Information: Scale 2:1 All Dimensions in mm [in] Designation All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Index Date Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJR 8P8C, 1X8 133214 www.ERNI.com Class MJ I (2/2) A3