BAUTEILE / FERTIGUNGSHINWEISE Piece parts / Manufacturing notices TECHNISCHE SKIZZE / Technical sketch 4,5 0,18 Isolierkörper grün zulässig Imprint see technical sketch - Gute Chemikalien- und Ölbeständigkeit. Beim Einsatz aggressiver Medien ist die Materialbeständigkeit applikationsbezogen zu überprüfen. Nickel Plating 4-6 μm 16 0,64 insulation body green allowed Isolierkörper grün zulässig Good chemical and oil resistance. When using agressive media, material resistance based on application must be checked. insulation body green allowed ERNI-Art.- Nr. 15 0,59 ERNI Part No. XXXXXX Buchse M12 / M12 female 5-polig / 5 pin 36 1,42 15 0,59 Buchse M12 / M12 female 5-polig / 5 pin - Aufdruck mittels Tampondruck entspr. techn. Skizze vernickelt 4-6 μm Production date e.g.: KW07 2010 vernickelt 4-6 μm Stecker M12 / M12 male 5-polig / 5 pin 072010 STROMLAUFPLAN / Schematic diagram Nickel Plating 4-6 μm 19 0,74 5 1 4 2 1 3 3 Ansicht: Steckgesicht; Kontaktbelegung / View: mating face; pin assignment 4 5 2 1 Buchse M12 / 2 female M12 3 5 Mate ri al s & F i ni sh Contact material: a) male b) female Contact finish, mating zone: a) male b) female Insulation material: Val ue T-coupler M12 male 2 x M12 female, black 5 pin / 5 pin A-coding Screw locking M12x1 (0,6 Nm) -25…+85°C 1 piece per bag Standard description CuZn39Pb3F50 Standard description CuNi2Si HV160U Thickness of plating 0,5 µm Au over 2 µm Ni Thickness of plating 0,8 µm Au (partial) Standard description Elastollan R 3000 A El e ctri cal Data Rated (nominal) voltage; max. Rated current; per contact, max. Rated impulse voltage Stand ard ap p l i c. IEC 61-076-2-101 IEC 61-076-2-101 IEC 61-076-2-101 1 5 A p p ro val s Protection class (mated and locked) IEC 60529 Pollution degree Insulation category IEC 60664-1 RoHS compliant 4 IP67 3 I Yes 3 2 1 2. Stecker M12 /male M12 Val ue 60 V AC/DC 4A 0,8 kV Artikel-Nr. / Part No. CAN/DeviceNet 394892 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Temperature range: Packaging: Stand ard ap p l i c. 5 4 SPECIFICATIONS Circular Connector Pin assignment: Coding: Connection: 3 4 2 T e chn i cal Sp e ci fi cati o ns Type: 1. Buchse M12 / 1. female M12 5 4 3 2 1 shield 45 1,77 Tolerances Information: 2:1 Scale All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. CCA M12, 5 pin/2 x M12, 5 pin A-coding 394893 www.ERNI.com 26.07.2010 Index Date Class CCA I (1/1) A3