BA UTEILE / FERTIGUNGSHINWEISE Piece parts / Manufacturing notices TECHNISCHE SKIZZE /Technical sketch 12 0,47 Imprint production date with ink-jet printer - Gute Chemikalien- und Ölbeständigkeit. Beim Einsatz aggressiver Medien ist die Materialbeständigkeit applikationsbezogen zu überprüfen. 10,1 0,4 Good chemical and oil resistance. When using agressive media, material resistance based on application must be checked. 3 0,12 M16x1,5 2,5 0,1 097 14,7 0,58 10,5 0,41 SW 18 W / AF 18 21 0,83 Production date e.g.: KW09 2007 Buchse M12 /M12 female 5-polig / 5 pin - Aufdruck Produktionsdatum mittels Tintenstrahldrucker Stecker M12 M / 12 male 5-polig /5 pin SW 19 WAF / 19 O-Ring /O-ring STROMLAUFPLAN /Schematic diagram max. 35 1,36 3 2 5 3 Ansicht: Steckgesicht; Kontaktbelegung / 4 5 4 View: mating face; pin assignment 1 2 1 1 1 2 2 4 4 3 3 5 5 geschirmt /shielded S PE C IF IC A T IO NS C i r c u lar C o n n e c t o r P in assi gnme nt: Co ding: Connection: T e mpe rature range : P ackagi ng: Mat e r i al s & F i n i s h Contact material: a) male b) female Contact finish, mating zone: a) male b) female Insulation material: Housing material: S t an d ar d ap p l i c . V al u e Panel feed-through M12 female / male 5 pi n A -co di ng Screw locking M12x1 (0,6 Nm) -25…+ 90°C 1 pie ce pe r bag Standard description CuZn39Pb3F50 Standard description CuNi2Si HV160U Thickness of plating 0,5 µm Au over 2 µm Ni Thickness of plating 0,8 µm Au (partial) Standard description Elastollan R 3000 A Standard description CuZn40Pb2; Ni plating E l e c t r i c al D at a S t an d ar d ap p l i c . Rated (nominal) voltage; max. IEC 61-076-2-101 Rated current; per contact, max. IEC 61-076-2-101 IEC 61-076-2-101 R ate d i mpulse vo ltage V al u e 24 V AC/DC 4 A 0, 8 kV A p p r o v al s Protection class (mate d and lo cke d) IEC 60529 P o lluti o n de gre e Insulation category IEC 60664-1 R o HS co mpli ant IP 67 3 I Yes Artikel-Nr. /Part No. 254780 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. T e c h n i c al S p e c i f i c at i o n s Type: Tolerances Information: 2:1 Scale All Dimensions in mm [in] Designation All rights reserved. Subject to modification Only for Information. without prior notice. To ensure that this is the latest Drawing will not be updated. version of this drawing, please contact one of the ERNI companies before using. CCA www.ERNI.com Index Date Class M12, 5pin / M12, 5pin A-coding 254781 CCA I A3