BAUTEILE / FERTIGUNGSHINWEISE Piece parts / Manufacturing notices - Aufdruck mittels Tampondruck entspr. techn. Skizze Imprint see technical sketch TECHNISCHE SKIZZE /Technical sketch 15 0,59 092007 7205-88531 254778 ERNI 10 0,39 Part No. 15 0,58 Good chemical and oil resistance. When using agressive media, material resistance based on application must be checked. Production date e.g.: KW09 2007 ERNI-Art.- Nr. Stecker M8 /M8 male 4-polig /4 pin - Gute Chemikalien- und Ölbeständigkeit. Beim Einsatz aggressiver Medien ist die Materialbeständigkeit applikationsbezogen zu überprüfen. Buchse M12 /M12 female 4-polig / 4 pin STROMLAUFPLAN /Schematic diagram 46 1,81 1 3 1 1 2 2 4 4 3 3 1 Ansicht: Steckgesicht; Kontaktbelegung / 2 4 View: mating face; pin assignment 4 5 2 3 SPECIFICATIONS Circular Connector P i n assi gnme nt: Co di ng: Connection: T e mpe rature range : P ackagi ng: Mate ri al s & F i n i sh Contact material: a) male b) female Contact finish, mating zone: a) male b) female Insulation material: Stan d ard ap p l i c . Val u e Adaptor M8 male M12 female, black 4 pin A-co ding Screw locking M8x1 (0,4 Nm) / M12x1 (0,6 Nm) -25…+85°C 1 pie ce pe r bag Standard description CuZn39Pb3F50 Standard description CuNi2Si HV160U Thickness of plating 0,5 µm Au over 2 µm Ni Thickness of plating 0,8 µm Au (partial) Standard description Elastollan R 3000 A El e c tri c al Data Stan d ard ap p l i c . Rated (nominal) voltage; max. IEC 61-076-2-101 Rated current; per contact, max. IEC 61-076-2-101 Rate d impulse vo ltage IEC 61-076-2-101 A p p ro v al s Protection class (mate d and lo cke d) IEC 60529 P o lluti o n de gre e Insulation category IEC 60664-1 Ro HS co mpliant Artikel-Nr. /Part No. Val ue 24 V AC/DC 4 A 0,8 kV IP 67 3 I Y es 254778 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. T e c h ni c al Sp e c i fi c ati o n s Type: Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. CCA Date A-coding 254779 www.ERNI.com Index M8, 4pin / M12, 4pin Class CCA I A3