MICROCIRCUIT DATA SHEET Original Creation Date: 07/02/96 Last Update Date: 03/17/97 Last Major Revision Date: 07/02/96 MN54ACT240-X REV 1B0 Octal Buffers/Line Drivers With TRI-State Outputs General Description The ACT240 is an octal buffer and line driver designed to be employed as a memory and address driver, clock driver and bus-oriented transmitter/reciever which provides improved PC board density. Industry Part Number NS Part Numbers 54ACT240 54ACT240DMQB 54ACT240FMQB 54ACT240LMQB Prime Die J240 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MN54ACT240-X REV 1B0 Features - Icc and Ioz reduced by 50% Inverting TRI-STATE outputs drive bus lines or buffer memory address registers. Outputs source/sink 24 mA ACT240 has TTL-compatible inputs Standard Military Drawing (SMD) - ACT240: 5962-87759 2 MICROCIRCUIT DATA SHEET MN54ACT240-X REV 1B0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Vi = Vi = DC Input Diode Current (Iik) -0.5V Vcc + 0.5V Voltage (Vi) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Source or Sink Current (Io) -20 mA +20 mA +50 mA DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA Storage Temperature (Tstg) -65 C to +150 C Junction Temperature (Tj) CDIP Note 1: 175 C Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature (Ta) -55 C to +125 C Minimum ACT Vin Vcc Input Edge Rate (Delta V/Delta t) Devices from 0.8V to 2.0V @ 4.5V, 5.5V 125 mV/ns 3 MICROCIRCUIT DATA SHEET MN54ACT240-X REV 1B0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL IIH IIL VOL PARAMETER High Level Input Current Low Level Input Current Low Level Output Voltage CONDITIONS NOTES VCC=5.5V, VM=5.5V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUT 0.1 uA 1 1, 2 INPUT 1.0 uA 2, 3 1, 2 INPUT -0.1 uA 1 1, 2 INPUT -1.0 uA 2, 3 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 VCC=4.5V, IOL=50.0uA, VIL=0.8V, VIH=2.0V 1, 2 OUTPUT .10 V 1, 2, 3 VCC=5.5V, IOL=24.0mA, VIL=0.8V, VIH=2.0V 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 VCC=5.5V, IOL=50.0uA, VIL=0.8V, VIH=2.0V 1, 2 OUTPUT .10 V 1, 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VM=0.0V VCC=4.5V, IOL=24.0mA, VIL=0.8V, VIH=2.0V VIOL Dynamic output current LOW VCC=5.5V, VIL=0.8V, VIH=2.0V, IOL=50.0mA 1, OUTPUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIL=0.8V, IOH=-24.0mA 1, 2 OUTPUT 3.86 V 1 1, 2 OUTPUT 3.70 V 2, 3 VCC=4.5V, VIL=0.8V, IOH=-50.0uA 1, 2 OUTPUT 4.40 V 1, 2, 3 VCC=5.5V, VIL=0.8V, IOH=-24.0mA 1, 2 OUTPUT 4.86 V 1 1, 2 OUTPUT 4.70 V 2, 3 VCC=5.5V, VIL=0.8V, IOH=-50.0uA 1, 2 OUTPUT 5.40 V 1, 2, 3 3.85 V 1, 2, 3 VIOH Dynamic output current HIGH VCC=5.5V, VIL=0.8V, IOH=-50.0mA 1, OUTPUT 2, 5 IOZH Maximum TRI-STATE VCC=4.5V, VM=4.5V, VINH=4.5V, VIH=2.0V 1, 2 OUTPUT 0.25 uA 1 1, 2 OUTPUT 5.0 uA 2, 3 1, 2 OUTPUT 0.25 uA 1 1, 2 OUTPUT 5.0 uA 2, 3 1, 2 OUTPUT -0.25 uA 1 1, 2 OUTPUT -5.0 uA 2, 3 1, 2 OUTPUT -0.25 uA 1 1, 2 OUTPUT -5.0 uA 2, 3 VCC=5.5V, VM=5.5V, VINH=5.5V, VIH=2.0V IOZL Maximum TRI-STATE VCC=4.5V, VM=0.0V, VINL=0.0V, VIH=2.0V VCC=5.5V, VM=0.0V, VINL=0.0V, VIH=2.0V 4 MICROCIRCUIT DATA SHEET MN54ACT240-X REV 1B0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL ICCH ICCZ ICCL ICCT PARAMETER Supply Current Outputs HIGH Supply Current Outputs Tri-State Supply Current Outputs LOW Supply Current per Input CONDITIONS NOTES VCC=5.5V, VINL=0.0V VCC=5.5V, VINH=5.5V, VINL=0.0V VCC=5.5V, VINH=5.5V, VINL=0.0V VCC=5.5V, VIHT=VCC-2.1V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 1.0 mA 1 1, 2 VCC 1.6 mA 2, 3 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pF, RL=500 OHMS, TRISE/TFALL=3.0ns, Temp Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS GUARANTEED BUT NOT TESTED. tpLH tpHL tpZL tpZH tpHZ tpLZ Propagation Delay Propagation Delay Output Enable Output Enable Output Disable Output Disable VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V 5 3, In to 4, 7 On 1.5 8.5 ns 9 3, In to 4, 7 On 1.5 9.5 ns 10, 11 3, In to 4, 7 On 1.5 8.0 ns 9 3, In to 4, 7 On 1.5 9.0 ns 10, 11 3, OE to 4, 7 On 1.5 9.5 ns 9 3, OE to 4, 7 On 1.5 11.5 ns 10, 11 3, OE to 4, 7 On 1.5 8.5 ns 9 3, OE to 4, 7 On 1.5 10.0 ns 10, 11 3, OE to 4, 7 On 1.5 9.0 ns 9 3, OE to 4, 7 On 1.5 11.0 ns 10, 11 3, OE to 4, 7 On 1.5 9.5 ns 9 3, OE to 4, 7 On 1.5 11.5 ns 10, 11 MICROCIRCUIT DATA SHEET MN54ACT240-X REV 1B0 (Continued) Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A1, 2, 7, & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A9 & 10. TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX. GUARANTEED BUT NOT TESTED (DESIGN CHARACTERIZATION DATA). +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS. 6