MICROCIRCUIT DATA SHEET Original Creation Date: 01/04/94 Last Update Date: 04/09/99 Last Major Revision Date: 08/25/94 MN54FCT533-X REV 0A0 Octal Transparent Latch With 3-State Outputs General Description The FCT533 consists of eight latches with TRI-STATE outputs for bus organized system applications. The flip-flops appear transparent to the data when the Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup times is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH the bus output is in the high impedance state. FACT TM FCT utilizes NSC quiet series technology to provide improved quiet output switching and dynamic threshold performance. FACT FCT features GTO TM output control and undershoot corrector in addition to a split ground bus for superior performance. The FCT533 is the same as the FCT373, except that the outputs are inverted. Industry Part Number NS Part Numbers 54FCT533 54FCT533DMQB 54FCT533FMQB 54FCT533LMQB Prime Die Y533 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MN54FCT533-X REV 0A0 Features - Icc and Ioz reduced to 40.0 uA and + 2.5V uA respectively NSC 54FCT533 is pin and funtionally equivalent to IDT 54FCT533 TRI-STATE outputs for bus interfacing Input clamp diodes to limit bus reflection TTL/CMOS input and output level compatible Iol =48mA (Com), 32 mA (Mil) CMOS power levels ESD immunity 4kV typ Military product compliant to MIL-STD 883 and Standard Military Drawing 5962-88651 2 MICROCIRCUIT DATA SHEET MN54FCT533-X REV 0A0 (Absolute Maximum Ratings) Terminal Voltage with Respect to GND (Vterm) 54FCT Temperature under Bias (Tbias) 54FCT Storage Temperature (Tstg) 54FCT DC Output Current (Iout) -0.5V to + 7.0V -65C to +135C -65C to +150C 120 mA Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. Exposure to absolute maximum rating conditions for extended periods may affect reliability. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Recommended Operating Conditions (Note 1) Supply Voltage (Vcc) 54FCT Input Voltage 4.5V to 5.5V 0V to Vcc Output Voltage 0V to Vcc Operating Temperature (Ta) 54FCT Junction Temperature (Tj) CDIP PDIP Note 1: -55C to + 125C 175 C 140 C All commercial packaging is not recommended for applications requireing greater than 2000 temperature cycles from -40C to +125C. 3 MICROCIRCUIT DATA SHEET MN54FCT533-X REV 0A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: 4.5V to 5.5V Temp. Range -55 C to 125 C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH High level input Current VCC=5.5V, VM=5.5V 1, 2 IN 5.0 uA 1, 2, 3 IIL Low level input Current VCC=5.5V, VM=0.0V 1, 2 IN -5.0 uA 1, 2, 3 VOL Low level output Voltage VCC=4.5V, VIH=2.0V, VIL=0.8V, IOL=300.0uA 1, 2 OUT .20 V 1, 2, 3 VCC=4.5V, VIH=2.0V, VIL=0.8V, IOL=32.0mA 1, 2 OUT .50 V 1, 2, 3 VCC=3.0V, VIH=2.8V, VIL=0.2V, IOL=300.0uA 1, 2 OUT .20 V 1, 2, 3 1.1 V 1, 2, 3 VIOL Low Level Output Voltage VCC=5.5V, VIH=5.5V, VIL=0.0V, IOL=57.0mA 1, OUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIH=2.0V, VIL=0.8V, IOH=-300.0uA 1, 2 OUT 4.30 V 1, 2, 3 VCC=4.5V, VIH=2.0V, VIL=0.8V, IOH=-12.0mA 1, 2 OUT 2.40 V 1, 2, 3 VCC=3.0V, VIH=2.8V, VIL=0.2V, IOH=-32.0uA 1, 2 OUT 2.80 V 1, 2, 3 3.85 V 1, 2, 3 VIOH High Level Output Voltage VCC=5.5V, VIH=5.5V, VIL=0.0V, IOH=-50.0mA 1, OUT 2, 5 IOZH Maximum TRI-STATE Current VCC=5.5V, VM=5.5V, VINH=5.5V, VINL=0.0V,VIH=2.0V 1, 2 OUT 10.0 uA 1, 2, 3 IOZL Maximum TRI-STATE Current VCC=5.5V, VM=0.0V, VINH=5.5V, VIH=2.0V 1, 2 OUT -10.0 uA 1, 2, 3 ICCH Positive Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 1.5 mA 1, 2, 3 ICCL Negative Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 1.5 mA 1, 2, 3 ICCZ Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 1.5 mA 1, 2, 3 ICCT Supply Current VCC=5.5V, VIHT=3.4V 1, 2 VCC 2.0 mA 1, 2, 3 ICCD Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V, 1 INPUT TOGGLING @ 50% DUTY CYCLE 6 VCC 0.4 IOS Short Circuit Current VCC-5.5V, IOS=-60mA 1, 2 OUT 0.0 ICC Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V, 1 TOGGLING, INPUT FREQ.=10MHz @ 50% 1 VCC 5.5 mA 1, 2, 3 VCC=5.5V, VIHT=3.4V, VINL=0.0V, 1 INPUT FREQ.=10MHz @ 50% DUTY CYCL 1 VCC 6.0 mA 1, 2, 3 4 mA/MH 1, 2, 3 z V 1, 2, 3 MICROCIRCUIT DATA SHEET MN54FCT533-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: 4.5V to 5.5V Temp. Range -55 C to 125 C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS VIKL IIL = -18mA 1, 2 IN -1.2 V 1, 2, 3 VIKH IIH = 18mA, VCC=4.5V 1, 2 IN 5.7 V 1, 2, 3 6 8.0 pF 1 CIN Input Capacitance IN AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TRISE=3.0ns, TFALL=3.0ns tpLH(1) Propagation Delay VCC=4.5V 7 Dn to On 1.5 8.5 ns 9, 10, 11 tpHL(1) Propagation Delay VCC=4.5V 7 Dn to On 1.5 8.5 ns 9, 10, 11 tpLH(2) Propagation Delay VCC=4.5V 7 LE to On 2.0 9.5 ns 9, 10, 11 tpHL(2) Propagation Delay VCC=4.5V 7 LE to On 2.0 9.5 ns 9, 10, 11 tpZH Output Enable Time VCC=4.5V 7 OE to On 1.5 12.5 ns 9, 10, 11 tpZL Output Enable Time VCC=4.5V 7 OE to On 1.5 12.5 ns 9, 10, 11 tpHZ Output Disable Time VCC=4.5V 7 OE to On 1.5 8.5 ns 9, 10, 11 tpLZ Output Disable Time VCC=4.5V 7 OE to On 1.5 8.5 ns 9, 10, 11 ts(H/L) Setup Time HIGH or LOW VCC=4.5V 6 Dn to LE 2.0 ns 9, 10, 11 th(H/L) Hold Time HIGH or LOW VCC=4.5V 6 Dn to LE 3.0 ns 9, 10, 11 tw(H) Pulse Width VCC=4.5V 6 LE Pulse Width 6.0 ns 9, 10, 11 Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: SCREEN TESTED 100% ON EACH DEVICE AT -55C, +25C, & +125C TEMP., SUBGROUPS 1, 2, 3, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C , & -55C TEMP., SUBGROUPS A1, 2, 3, 7 & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C SUBGROUP A9 & AT +125C & -55C TEMP., SUBGROUPS 10 & 11. TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX. NOT TESTED TEMPERATURE (DESIGN CHARACTERIZATION DATA) SCREEN TESTED 100% ON EACH DEVICE AT -55C, +25C, AND +125C TEMP., SUBGROUPS A9, A10, AND A11. 5