ETC 54ACTQ541FMQB

MICROCIRCUIT DATA SHEET
Original Creation Date: 07/16/96
Last Update Date: 05/27/99
Last Major Revision Date: 03/11/99
MN54ACTQ541-X REV 2A0
Octal Buffer/Line Driver with TRI-STATE Outputs
General Description
The ACTQ541 is an octal buffer/line driver designed to be employed as a memory and address
driver, clock driver and bus oriented transmitter/receiver.
This device is similar in function to the ACTQ244 while providing flow-through
architecture (inputs on opposite side from outputs). This pinout arrangement makes this
device especially useful as an output port for microprocessors, allowing ease of layout
and greater PC board density.
The ACTQ541 utilizes NSC's FACT TM Quiet Series technology to guarantee quiet output
switching the improved dynamic threshold performance. FACT Quiet series features GTO
output control and undershoot corrector in addition to split ground bus for superior
performance.
Industry Part Number
NS Part Numbers
54ACTQ541
54ACTQ541DMQB*
54ACTQ541FMQB**
54ACTQ541LMQB***
Prime Die
D541
Controlling Document
5962-96829
Processing
Subgrp Description
MIL-STD-883, Method 5004
1
2
3
4
5
6
7
8A
8B
9
10
11
Quality Conformance Inspection
MIL-STD-883 5005
1
Static tests at
Static tests at
Static tests at
Dynamic tests at
Dynamic tests at
Dynamic tests at
Functional tests at
Functional tests at
Functional tests at
Switching tests at
Switching tests at
Switching tests at
Temp ( oC)
+25 C
+125 C
-55 C
+25 C
+125 C
-55 C
+25 C
+125 C
-55 C
+25 C
+125 C
-55 C
MICROCIRCUIT DATA SHEET
MN54ACTQ541-X REV 2A0
Features
- Icc and Ioz reduced by 50%
- Guaranteed simultaneous switching noise level and dynamic threshold performance
- Guaranteed pin-to-pin skew AC performance
- Inputs and outputs on opposite sides of package for easy board layout
- Non-inverting TRI-STATE outputs
- Guaranteed 4 kV miniumu ESD immunity
- TTL compatible inputs
- Outputs source/sink 24 mA
- SMD (Standard Military Drawing)
- 5962-9682901QRA*, QSA**, Q2A***
2
MICROCIRCUIT DATA SHEET
MN54ACTQ541-X REV 2A0
(Absolute Maximum Ratings)
(Note 1)
Supply Voltage (Vcc)
-0.5V to +7.0V
DC Input
Vi =
Vi =
DC Input
Diode Current (Iik)
-0.5V
Vcc +0.5V
Voltage (Vi)
-20 mA
+20 mA
-0.5V to Vcc +0.5V
DC Output Diode Current (Iok)
Vo = -0.5V
Vo = Vcc +0.5V
DC Output Voltage (Vo)
-20 mA
+20 mA
-0.5V to Vcc +0.5V
DC Output Source or Sink Current (Io)
+50 mA
DC Vcc or Ground Current per Output Pin (Icc or Ignd)
+50 mA
Storage Temperature (Tstg)
-65 C to +150 C
DC Latch-Up Source or Sink Current
+300 mA
Junction Temperature (Tj)
PDIP
Note 1:
140 C
Absolute maximum ratings are those values beyond which damage to the device may
occur. The databook specifications should be met, without exception, to ensure that
the system design is reliable over its power supply, temperature, and output/input
loading variables. National does not recommend operation of FACT TM circuits outside
databook specifications.
Recommended Operating Conditions
(Note 1)
Supply Voltage (Vcc)
4.5V to 5.5V
Input Voltage (Vi)
0V to Vcc
Output Voltage (Vo)
0V to Vcc
Minimum Input Edge Rate Delta V/Delta T
ACTQ Devices
Vin from 0.8V to 2.0V
Vc @ 4.5V, 5.5V
Note 1:
125 mV/ns
All commercial packaging is not recommended for application requiring greater than
2000 temperature cycles from -40C to +125C.
3
MICROCIRCUIT DATA SHEET
MN54ACTQ541-X REV 2A0
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT
TESTED.
SYMBOL
IIH
IIL
VOL
PARAMETER
High Level input
Current
Low Level input
Current
Low level output
voltage
CONDITIONS
NOTES
VCC=5.5V, VIH=5.5V
PINNAME
MIN
MAX
UNIT
SUBGROUPS
1, 2 INPUT
0.1
uA
1
1, 2 INPUT
1.0
uA
2, 3
1, 2 INPUT
-0.1
uA
1
1, 2 INPUT
-1.0
uA
2, 3
1, 2 OUTPUT
.36
V
1
1, 2 OUTPUT
.50
V
2, 3
VCC=4.5V, VIL=0.8V, IOL=50.0uA,
VIH=2.0V
1, 2 OUTPUT
.10
V
1, 2,
3
VCC=5.5V, VIL=0.8V, IOL=24.0mA,
VIH=2.0V
1, 2 OUTPUT
.36
V
1
1, 2 OUTPUT
.50
V
2, 3
VCC=5.5V, VIL=0.8V, IOL=50.0uA,
VIL=2.0V
1, 2 OUTPUT
.10
V
1, 2,
3
1.65
V
1, 2,
3
VCC=5.5V, VIL=0.0V
VCC=4.5V, VIL=0.8V, IOL=24.0mA,
VIH=2.0V
VIOL
Dynamic Output
Current LOW
VCC=5.5V, VIH=5.5V, VIL=0.0V,
IOL=50.0mA
1,
OUTPUT
2, 5
VOH
High Level Output
Voltage
VCC=4.5V, VIL=0.8V, IOH=-24.0mA,
VIH=2.0V
1, 2 OUTPUT
3.86
V
1
1, 2 OUTPUT
3.70
V
2, 3
VCC=4.5V, VIL=0.8V, IOH=-50.0uA,
VIH=2.0V
1, 2 OUTPUT
4.40
V
1, 2,
3
VCC=5.5V, VIL=0.8V, IOH=-24.0mA,
VIH=2.0V
1, 2 OUTPUT
4.86
V
1
1, 2 OUTPUT
4.70
V
2, 3
VCC=5.5V, VIL=0.8V, IOH=-50.0uA,
VIH=2.0V
1, 2 OUTPUT
5.40
V
1, 2,
3
3.85
V
1, 2,
3
VIOH
Dynamic Output
Current HIGH
VCC=5.5V, VIH=5.5V, VIL=0.0V,
IOH=-50.0mA
1,
OUTPUT
2, 5
ICCH
Supply Current
VCC=5.5V, VIH=5.5V
1, 2 VCC
4.0
uA
1
1, 2 VCC
80
uA
2, 3
1, 2 VCC
4.0
uA
1
1, 2 VCC
80
uA
2, 3
1, 2 VCC
4.0
uA
1
1, 2 VCC
80
uA
2, 3
1, 2 VCC
1.0
mA
1
1, 2 VCC
1.6
mA
2, 3
ICCL
ICCZ
ICCT
Supply Current
Supply Current
Supply Current
VCC=5.5V, VIL=0.0V
VCC=5.5V, VIN=0.0V OR 5.5V
VCC=5.5V, VINH=3.4V
4
MICROCIRCUIT DATA SHEET
MN54ACTQ541-X REV 2A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT
TESTED.
SYMBOL
IOZH
PARAMETER
Maximum TRI-STATE
Leakage Current
CONDITIONS
NOTES
VCC=4.5V, VM=4.5V, VIH=2.0V
VCC=5.5V, VM=5.5V, VIH=2.0V
IOZL
Maximum TRI-STATE
Leakage Current
VCC=4.5V, VM=0.0V, VIH=2.0V
VCC=5.5V, VM=0.0V, VIH=2.0V
PINNAME
MIN
MAX
UNIT
SUBGROUPS
1, 2 OUTPUT
0.25
uA
1
1, 2 OUTPUT
5.0
uA
2, 3
1, 2 OUTPUT
0.25
uA
1
1, 2 OUTPUT
5.0
uA
2, 3
1, 2 OUTPUT
-0.25
uA
1
1, 2 OUTPUT
-5.0
uA
2, 3
1, 2 OUTPUT
-0.25
uA
1
1, 2 OUTPUT
-5.0
uA
2, 3
VIKL
VCC=4.5V, IKL=-18mA
1, 2 INPUT
-1.2
V
1, 2,
3
VIKH
VCC=4.5V, IKH=18mA
1, 2 INPUT
5.7
V
1, 2,
3
0.8
V
4
V
4
VILD
Maximum Low Level
Dynamic Input
Voltage
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 9 INPUT
VIHD
Minimum High
Level Dynamic
Input Voltage
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 9 INPUT
VOLP
Quiet Output
Maximum Dynamic
Vol
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 8 OUTPUT
1.5
V
4
VOLV
Quiet Output
Minimum Dynamic
Vol
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 8 OUTPUT
-1.2
V
4
VOHP
Quiet Output
Maximum Dynamic
Voh
VCC=5.0V, LOAD 50pF / 500 OHMS
6,
10
OUTPUT
VOH
+1.0
V
4
VOHV
Quiet Output
Minimum Dynamic
Voh
VCC=5.0V, LOAD 50pF / 500 OHMS
6,
10
OUTPUT
VOH
-2.3
V
4
5
2.2
MICROCIRCUIT DATA SHEET
MN54ACTQ541-X REV 2A0
Electrical Characteristics
AC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pf, RL=500 OHMS, TR & TF=3.0ns, Temp range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS
GUARANTEED BUT NOT TESTED.
SYMBOL
tpLH
tpHL
tpZH
tpZL
tpHZ
tpLZ
PARAMETER
Propagation Delay
Propagation Delay
Output Enable
Time
Output Enable
Time
Output Disable
Time
Output Disable
Time
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
CONDITIONS
NOTES
VCC=4.5V
VCC=4.5V
VCC=4.5V
VCC=4.5V
VCC=4.5V
VCC=4.5V
PINNAME
MIN
MAX
UNIT
3,
Dn to
4, 7 On
2.0
8.0
ns
9
3,
Dn to
4, 7 On
2.0
9.0
ns
10, 11
3,
Dn to
4, 7 On
2.0
8.0
ns
9
3,
Dn to
4, 7 On
2.0
9.0
ns
10, 11
3,
OE to
4, 7 On
1.5
8.0
ns
9
3,
OE to
4, 7 On
1.5
9.5
ns
10, 11
3,
OE to
4, 7 On
1.5
10.0
ns
9
3,
OE to
4, 7 On
1.5
11.5
ns
10, 11
3,
OE to
4, 7 On
1.5
8.0
ns
9
3,
OE to
4, 7 On
1.5
9.5
ns
10, 11
3,
OE to
4, 7 On
1.5
8.0
ns
9
3,
OE to
4, 7 On
1.5
9.5
ns
10, 11
SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &
8.
SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A1, 2, 7, & 8.
SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9.
SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A9 & 10.
TRANSMISSION LINE DRIVING TEST, GUARDBANDED LIMITS SET FOR +25C, 2 MSEC DURATION MAX.
Note 6:
Note 7:
Note 8:
GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA)
+25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS.
MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @
VOL.
Note 9: MAX NUMBER OF DATA INPUTS (N) SWITCHING. (N-1) INPUTS SWITCHING 0V TO 3V.
INPUT-UNDER-TEST SWITCHING 3V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ= 1
MHZ.
Note 10: MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @
VOH.
6
SUBGROUPS
MICROCIRCUIT DATA SHEET
MN54ACTQ541-X REV 2A0
Revision History
Rev
ECN #
2A0
M0003311 05/27/99
Rel Date
Originator
Changes
Linda Collins
Added VOHV and VOHP. Added note 10. Changed IOL to
IOH in the VOH and VIOH test conditions.
7