Tantalum Chip Capacitors Standard / HighCap Series/Type: Date: B45196E, B45198E, B45196H, B45198H July 2006 © KEMET 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without KEMET's prior express consent is prohibited. Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Construction Polar tantalum capacitors with solid electrolyte Conventional TaMnO2 technology Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Features Ultra-high volumetric efficiency Excellent solderability Stable temperature and frequency characteristics Low leakage current, low dissipation factor Low self-inductance High resistance to shock and vibration Suitable for use without series resistor (special operating conditions recommended) Lead-free and material content compatible with RoHS Some partnumbers are only available in M (±20%) tolerance; these types have a maximum capacitance drift at +125 °C of +20% Applications Telecommunications (e.g. mobile phones, infrastructure) Data processing (e.g. laptops, mainframes) Measuring and control engineering (e.g. voltage regulators) Automotive electronics (e.g. safety applications e.g airbags, ABS, motor management) Medical engineering DC/DC converters Soldering Suitable for reflow soldering (IR and vapor phase, in compliance with JEDEC J-STD-020 C) and wave soldering Delivery mode Taped and reeled in accordance with IEC 60286-3 Please read Important notes and Cautions and warnings at the end of this document. Page 2 of 20 Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Dimensional drawing ➀ Encapsulation: molded epoxy resin ➁ NiFe; tinned surface Sn100 or gold-plated ➂ Reduced slot length for case size A Dimensions Case size KEMET EIA/IECQ A 3216-18 B 3528-21 C 6032-28 D 7343-31 E 7343-44 Dimensions in mm (inches) L 3.2 ±0.2 (.126 ±0.008) 3.5 ±0.2 (.138 ±0.008) 6.0 ±0.3 (.236 ±0.012) 7.3 ±0.3 (.287 ±0.012) 7.3 ±0.3 (.287 ±0.012) W 1.6 ±0.2 (.063 ±0.008) 2.8 ±0.2 (.110 ±0.008) 3.2 ±0.3 (.126 ±0.012) 4.3 ±0.3 (.169 ±0.012) 4.3 ±0.3 (.169 ±0.012) Please read Important notes and Cautions and warnings at the end of this document. H 1.6 ±0.2 (.063 ±0.008) 1.9 ±0.2 (.075 ±0.008) 2.5 ±0.3 (.098 ±0.012) 2.8 ±0.3 (.110 ±0.012) 4.1 ±0.3 (.161 ±0.012) Page 3 of 20 L2 typ. W2 ±0.1 H2 typ. P ±0.3 ±(.004) ±(.012) 3.2 1.2 1.3 0.8 (.126) (.047) (.051) (.031) 3.5 2.2 (.138) (.087) 1.4 0.7 (.055) (.027) 6.1 2.2 (.240) (.087) 1.8 1.3 (.071) (.051) 7.3 2.4 (.287) (.094) 1.8 1.3 (.071) (.051) 7.3 2.4 (.287) (.094) 1.8 1.3 (.071) (.051) Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Marking Case size A Case size B Case sizes C, D, E Voltage coding for case size A Rated voltage 4 6.3 10 16 20 25 35 50 Code letter G J C D E V T A Capacitance coding 1st and 2nd digit Capacitance in pF 3rd digit Multiplier: 6 = 106 pF 7 = 107 pF 8 = 108 pF Date coding Year Month S = 2004 T = 2005 U = 2006 V = 2007 W = 2008 X = 2009 1 = January 2 = February 3 = March 4 = April 5 = May 6 = June 7 = July 8 = August 9 = September O = October N = November D = December Please read Important notes and Cautions and warnings at the end of this document. Page 4 of 20 Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Specifications and characteristics for Standard series in brief Series Ordering code Standard B45196E B45198E Technology Ta-MnO2 Ta-MnO2 Terminals Tinned Gold-plated Rated voltage (up to 85 °C) VR 4 ... 50 VDC Rated capacitance (20 °C, 120 Hz) CR 0.10 ... 100 µF ±20%, ±10% Capacitance tolerance Maximum impedance (20 °C, 100 kHz) Operating temperature range Failure rate (1 fit = 110-9 failures/h) CR VR ≤ 330 µF V CR VR > 330 µF V Service life Leakage current Zmax 0.8 ... 28 Ω Top 55 ... +125 °C (at 40 °C; ≤ VR, RS ≥ 3 Ω/V) fit ≤3 ≤10 (VR, 5 min, 20 °C) Ileak Detail specification Climatic category (to IEC 60068-1) >500000 10 CECC 30801-801 (55 °C/+125 °C/56 days damp heat test) Please read Important notes and Cautions and warnings at the end of this document. Page 5 of 20 55/125/56 h nA/µC Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Specifications and characteristics for HighCap series in brief Series Ordering code HighCap B45196H B45198H Technology Ta-MnO2 Ta-MnO2 Terminals Tinned Gold-plated Rated voltage (up to 85 °C) VR 4 ... 50 VDC Rated capacitance (20 °C, 120 Hz) CR 0.15 ... 1500 µF ±20%, ±10% Capacitance tolerance Maximum impedance (20 °C, 100 kHz) Operating temperature range Failure rate (1 fit = 110-9 failures/h) CR VR ≤ 330 µF V CR VR > 330 µF V Service life Leakage current Zmax 0.4 ... 22 Ω Top 55 ... +125 °C (at 40 °C; ≤ VR, RS ≥ 3 Ω/V) fit ≤8 ≤24 (VR, 5 min, 20 °C) Ileak Detail specification Climatic category (to IEC 60068-1) >500000 10 CECC 30801-802 (55 °C/+125 °C/56 days damp heat test) Please read Important notes and Cautions and warnings at the end of this document. Page 6 of 20 55/125/56 h nA/µC Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Overview of types (VDC) (up to 85 °C) CR (µF) 4 6.3 10 16 20 25 35 50 0.10 A 0.15 A A B 0.22 A A B 0.33 A 0.47 0.68 A 1.0 2.2 A A A A A A 3.3 A A 4.7 A A 6.8 A 15 A B A B A B A B A B A B A A B A B A B A B B A A B B C C A B C C D B A B C C D C D A B C E A B C A B C A B C B C D C D D E 47 A B C A B C D B C D C D 68 A B C D A B C D B C D C D 100 A B C D B C D B C D C D E 150 B C D B C D C D E 220 B C D C D E C D E 330 C D E C D E D E 470 C D E D E D E 1000 E E 1500 E E D D A B C A B C A B C D B C D E C D A B C A B C A B C B C D B C D D B C 33 E B A A B C A B C A B C D A B C A B C A B C B C D B C D D A A B C A B C B C D 22 680 A A 1.5 10 B A D E D E E E Upon request Please read Important notes and Cautions and warnings at the end of this document. Page 7 of 20 C D C D E C D C D E D E D E E D E E E C D D E D E E E Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Ordering code structure B45 196E 0 685 Tantalum capacitor Series 196E = Standard, tinned terminals 198E = Standard, gold-plated terminals 196H = HighCap, tinned terminals 198H = HighCap, gold-plated terminals Rated voltage 0 = 4 V, 1 = 6.3 V, 2 = 10 V, 3 = 16 V, 4 = 20 V, 5 = 25 V, 6 = 35 V, 7 = 50 V Rated capacitance + exponent C [pF] 10x E.g.: 686 = 68 pF 106 = 68 µF, 157 = 15 pF 107 = 150 µF Capacitance tolerance M = ±20%, K = ±10% Case size 10 = A 20 = B 30 = C 40 = D 50 = E Reel diameter 9 = 180 mm, 6 = 330 mm Please read Important notes and Cautions and warnings at the end of this document. Page 8 of 20 + 10 * Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Technical data and ordering codes CR Case size (20 °C, 120 Hz) µF DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) % µA VR (up to 85 °C) = 4 VDC, VR (up to 125 °C) = 2.5 VDC 3.3 A 0.5 6 4.7 A 0.5 6 6.8 A 0.5 6 A 0.5 10 6 B 0.5 10 6 A 0.6 15 6 B 0.6 15 6 A 0.9 22 8 B 0.9 22 6 C 0.9 22 6 A 1.3 33 8 B 1.3 33 6 C 1.3 33 6 A 1.9 47 10 B 1.9 47 6 C 1.9 47 6 A 2.7 68 30 B 2.7 68 6 C 2.7 68 6 D 2.7 68 6 A 4.0 100 30 B 4.0 100 8 C 4.0 100 8 D 4.0 100 8 B 6.0 150 10 C 6.0 150 8 D 6.0 150 8 B 8.8 220 20 C 8.8 220 15 D 8.8 220 8 C 13.2 330 15 D 13.0 330 10 Zmax (20 °C, 100 kHz) Ω 9.0 7.0 6.0 4.5 4.5 4.0 3.5 3.5 3.0 2.4 3.0 2.5 2.0 2.8 2.3 1.6 4.0 1.8 1.5 1.1 4.0 1.6 1.4 0.8 1.5 1.3 0.8 1.5 1.2 0.8 1.2 0.9 ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 9 of 20 Ordering code B45196E0335+10* B45196E0475+10* B45196H0685+10* B45196H0106+10* B45196E0106+20* B45196H0156+10* B45196E0156+20* B45196H0226+10* B45196H0226+20* B45196E0226+30* B45196H0336+10* B45196H0336+20* B45196E0336+30* B45196H0476+10* B45196H0476+20* B45196H0476+30* B45196H0686M10* ● B45196H0686+20* B45196H0686+30* B45196E0686+40* B45196H0107M10* ● B45196H0107+20* B45196H0107+30* B45196E0107+40* B45196H0157+20* ● B45196H0157+30* B45196H0157+40* B45196H0227M20* ● B45196H0227+30* B45196H0227+40* B45196H0337+30* ● B45196H0337+40* Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap CR Case size (20 °C, 120 Hz) DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) µF % µA E 13.0 330 8 C 14.2 470 20 D 19.0 470 10 E 19.0 470 8 D 27.2 680 12 E 27.0 680 12 E 40.0 1000 15 E 60.0 1500 25 VR (up to 85 °C) = 6.3 VDC, VR (up to 125 °C) = 4 VDC 2.2 A 0.5 6 3.3 A 0.5 6 4.7 A 0.5 6 6.8 A 0.5 6 6.8 B 0.5 6 A 0.6 10 6 B 0.6 10 6 A 0.9 15 6 B 0.9 15 6 C 1.0 15 6 A 1.4 22 8 B 1.4 22 6 C 1.4 22 6 A 2.1 33 10 B 2.1 33 6 C 2.1 33 6 A 3.0 47 15 B 3.0 47 6 C 3.0 47 6 D 3.0 47 6 A 4.3 68 15 B 4.3 68 8 C 4.3 68 6 D 4.3 68 6 B 6.3 100 12 Zmax (20 °C, 100 kHz) Ω 0.8 1.2 0.9 0.6 0.9 0.6 0.6 0.6 Ordering code 10.0 7.0 5.5 4.5 4.5 4.0 3.5 3.8 3.0 2.4 3.0 2.5 2.0 2.8 2.2 1.6 3.5 2.0 1.5 1.1 3.5 1.8 1.4 0.8 1.6 B45196E1225+10* B45196E1335+10* B45196H1475+10* B45196H1685+10* B45196E1685+20* B45196H1106+10* B45196E1106+20* B45196H1156+10* B45196H1156+20* B45196E1156+30* B45196H1226+10* B45196H1226+20* B45196E1226+30* B45196H1336+10* B45196H1336+20* B45196H1336+30* B45196H1476M10* ● B45196H1476+20* B45196H1476+30* B45196E1476+40* B45196H1686M10* ● B45196H1686+20* B45196H1686+30* B45196E1686+40* B45196H1107+20* ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 10 of 20 B45196H0337+50* B45196H0477+30* ● B45196H0477+40* B45196H0477+50* B45196H0687+40* B45196H0687+50* B45196H0108+50* ● B45196H0158+50* ● Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap CR Case size (20 °C, 120 Hz) DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) µF % µA C 6.3 100 8 D 6.3 100 8 B 9.5 150 15 C 9.5 150 8 D 9.5 150 8 C 14.0 220 10 D 14.0 220 8 E 14.0 220 12 C 20.8 330 15 D 21.0 330 8 E 21.0 330 8 D 30.0 470 15 E 30.0 470 8 D 42.8 680 20 E 43.0 680 15 E 63.0 1000 20 E 60.0 1500 25 VR (up to 85 °C) = 10 VDC, VR (up to 125 °C) = 6.3 VDC 1.5 A 0.5 6 2.2 A 0.5 6 3.3 A 0.5 6 4.7 A 0.5 6 4.7 B 0.5 6 6.8 A 0.7 6 6.8 B 0.7 6 A 1.0 10 6 B 1.0 10 6 C 1.0 10 6 A 1.5 15 6 B 1.5 15 6 C 1.5 15 6 A 2.2 22 8 B 2.2 22 6 C 2.2 22 6 Zmax (20 °C, 100 kHz) Ω 1.2 0.8 1.5 1.3 0.8 1.2 0.8 0.8 0.5 0.8 0.6 0.9 0.6 0.5 0.6 0.6 0.6 Ordering code 10.0 7.0 5.5 4.5 4.5 4.0 3.5 3.8 3.0 2.4 3.2 2.5 2.0 3.2 2.3 1.6 B45196E2155+10* B45196E2225+10* B45196H2335+10* B45196H2475+10* B45196E2475+20* B45196H2685+10* B45196E2685+20* B45196H2106+10* B45196H2106+20* B45196E2106+30* B45196H2156+10* B45196H2156+20* B45196E2156+30* B45196H2226+10* B45196H2226+20* B45196H2226+30* ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 11 of 20 B45196H1107+30* B45196H1107+40* B45196H1157M20* ● B45196H1157+30* B45196H1157+40* B45196H1227+30* B45196H1227+40* B45196H1227+50* B45196H1337+30* ● B45196H1337+40* B45196H1337+50* B45196H1477+40* B45196H1477+50* B45196H1687+40* ● B45196H1687+50* B45196H1108+50* ● B45196H1158+50* ● Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap CR Case size (20 °C, 120 Hz) DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) µF % µA A 3.3 33 10 B 3.3 33 6 C 3.0 33 6 D 3.3 33 6 B 4.7 47 8 C 4.7 47 6 D 4.7 47 6 B 6.8 68 8 C 6.8 68 6 D 6.8 68 6 B 10.0 100 12 C 10.0 100 8 D 10.0 100 8 C 15.0 150 10 D 15.0 150 8 E 15.0 150 8 C 22.0 220 10 D 22.0 220 10 E 22.0 220 8 D 33.0 330 12 E 33.0 330 10 D 47.0 470 15 E 47.0 470 12 E 68.0 680 15 VR (up to 85 °C) = 16 VDC, VR (up to 125 °C) = 10 VDC 1.0 A 0.5 4 1.5 A 0.5 6 2.2 A 0.5 6 3.3 A 0.5 6 3.3 B 0.6 6 4.7 A 0.8 6 4.7 B 0.8 6 6.8 A 1.1 6 6.8 B 1.1 6 Zmax (20 °C, 100 kHz) Ω 3.0 2.0 1.5 1.1 1.6 1.4 0.8 1.2 1.2 0.8 1.2 1.2 0.8 1.0 0.8 0.8 0.9 0.8 0.6 0.9 0.6 0.5 0.6 0.6 Ordering code 10.0 8.0 6.5 5.0 5.0 4.0 3.5 3.8 3.0 B45196E3105+10* B45196E3155+10* B45196H3225+10* B45196H3335+10* B45196E3335+20* B45196H3475+10* B45196E3475+20* B45196H3685+10* B45196H3685+20* ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 12 of 20 B45196H2336M10* ● B45196H2336+20* B45196H2336+30* B45196E2336+40* B45196H2476+20* B45196H2476+30* B45196E2476+40* B45196H2686+20* ● B45196H2686+30* B45196H2686+40* B45196H2107M20* ● B45196H2107+30* B45196H2107+40* B45196H2157+30* ● B45196H2157+40* B45196H2157+50* B45196H2227+30* ● B45196H2227+40* B45196H2227+50* B45196H2337+40* B45196H2337+50* B45196H2477+40* ● B45196H2477+50* B45196H2687+50* ● Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap CR Case size (20 °C, 120 Hz) DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) µF % µA 6.8 C 1.1 6 A 1.6 10 6 B 1.6 10 6 C 1.6 10 6 A 2.4 15 8 B 2.4 15 6 C 2.4 15 6 B 3.5 22 6 C 3.5 22 6 D 3.6 22 6 B 5.3 33 8 C 5.3 33 6 D 5.3 33 6 C 7.5 47 6 D 7.5 47 6 C 11.0 68 6 D 11.0 68 6 C 16.0 100 10 D 16.0 100 8 E 16.0 100 8 D 24.0 150 10 E 24.0 150 8 D 35.2 220 15 E 35.0 220 10 E 52.8 330 12 VR (up to 85 °C) = 20 VDC, VR (up to 125 °C) = 13 VDC 0.68 A 0.5 4 A 0.5 1 4 1.5 A 0.5 6 2.2 A 0.5 6 2.2 B 0.5 6 3.3 A 0.7 6 3.3 B 0.7 6 4.7 A 0.9 6 Zmax (20 °C, 100 kHz) Ω 2.4 3.0 2.5 2.0 3.5 2.3 1.6 2.6 1.5 1.1 2.1 1.4 1.0 1.4 0.8 1.2 0.8 1.0 0.8 0.8 0.9 0.6 0.9 0.9 0.4 Ordering code 12.0 9.0 8.0 6.0 6.0 4.0 4.5 3.5 B45196E4684+10* B45196E4105+10* B45196H4155+10* B45196H4225+10* B45196E4225+20* B45196H4335+10* B45196E4335+20* B45196H4475+10* ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 13 of 20 B45196E3685+30* B45196H3106+10* B45196H3106+20* B45196E3106+30* B45196H3156+10* ● B45196H3156+20* B45196H3156+30* B45196H3226+20* B45196H3226+30* B45196E3226+40* B45196H3336+20* ● B45196H3336+30* B45196E3336+40* B45196H3476+30* B45196H3476+40* B45196H3686+30* B45196H3686+40* B45196H3107+30* ● B45196H3107+40* B45196H3107+50* B45196H3157+40* B45196H3157+50* B45196H3227+40* ● B45196H3227+50* B45196H3337+50* ● Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap CR Case size (20 °C, 120 Hz) DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) µF % µA 4.7 B 0.9 6 4.7 C 1.0 6 6.8 A 1.4 6 6.8 B 1.4 6 6.8 C 1.4 6 A 2.0 10 8 B 2.0 10 6 C 2.0 10 6 B 3.0 15 6 C 3.0 15 6 D 3.0 15 6 B 4.4 22 6 C 4.4 22 6 D 4.4 22 6 C 6.6 33 6 D 6.6 33 6 C 9.4 47 6 D 9.4 47 6 E 9.4 47 6 D 14.0 68 6 E 14.0 68 6 D 20.0 100 8 E 20.0 100 8 E 30.0 150 10 VR (up to 85 °C) = 25 VDC, VR (up to 125 °C) = 16 VDC 0.47 A 0.5 4 0.68 A 0.5 4 A 0.5 1 4 1.5 A 0.5 6 1.5 B 0.5 6 2.2 A 0.6 6 2.2 B 0.6 6 3.3 A 0.8 6 3.3 B 0.8 6 Zmax (20 °C, 100 kHz) Ω 3.0 2.4 3.0 2.5 2.0 4.0 2.3 1.6 2.5 1.5 1.2 2.5 1.4 1.0 1.5 0.8 0.9 0.8 0.8 0.9 0.8 0.9 0.8 0.4 Ordering code 13.0 10.0 8.0 7.0 7.0 7.0 5.0 3.7 4.0 B45196E5474+10* B45196E5684+10* B45196H5105+10* B45196H5155+10* B45196E5155+20* B45196H5225+10* B45196E5225+20* B45196H5335+10* ● B45196H5335+20* ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 14 of 20 B45196H4475+20* B45196E4475+30* B45196H4685+10* ● B45196H4685+20* B45196E4685+30* B45196H4106+10* ● B45196H4106+20* B45196H4106+30* B45196H4156+20* ● B45196H4156+30* B45196E4156+40* B45196H4226+20* ● B45196H4226+30* B45196E4226+40* B45196H4336+30* B45196H4336+40* B45196H4476+30* ● B45196H4476+40* B45196H4476+50* B45196H4686+40* B45196H4686+50* B45196H4107+40* ● B45196H4107+50* B45196H4157+50* ● Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap CR Case size (20 °C, 120 Hz) DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) µF % µA 3.3 C 0.9 6 4.7 A 1.2 8 4.7 B 1.2 6 4.7 C 1.2 6 6.8 A 1.7 8 6.8 B 1.7 6 6.8 C 1.7 6 6.8 D 1.7 6 B 2.5 10 6 C 2.5 10 6 D 2.5 10 6 B 3.8 15 8 C 3.8 15 6 D 3.8 15 6 C 5.5 22 6 D 5.5 22 6 C 8.3 33 6 D 8.3 33 6 E 8.3 33 6 D 12.0 47 6 E 12.0 47 6 E 17.0 68 6 E 25.0 100 10 VR (up to 85 °C) = 35 VDC, VR (up to 125 °C) = 23 VDC 0.10 A 0.5 4 0.15 A 0.5 4 0.22 A 0.5 4 0.33 A 0.5 4 0.47 A 0.5 4 0.47 B 0.5 4 0.68 A 0.5 4 0.68 B 0.5 4 A 0.5 1 4 B 0.5 1 4 Zmax (20 °C, 100 kHz) Ω 2.8 4.0 3.2 2.3 4.0 2.8 2.0 1.8 2.5 1.6 1.2 2.5 1.5 1.0 1.4 0.8 0.9 0.8 0.8 0.8 0.8 0.9 0.4 Ordering code 28.0 23.0 19.0 15.0 11.0 11.0 8.0 8.0 7.0 7.0 B45196E6104+10* B45196E6154+10* B45196E6224+10* B45196E6334+10* B45196H6474+10* B45196E6474+20* B45196H6684+10* B45196E6684+20* B45196H6105+10* B45196E6105+20* ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 15 of 20 B45196E5335+30* B45196H5475+10* ● B45196H5475+20* B45196E5475+30* B45196H5685+10* ● B45196H5685+20* B45196H5685+30* B45196E5685+40* B45196H5106+20* ● B45196H5106+30* B45196E5106+40* B45196H5156+20* ● B45196H5156+30* B45196E5156+40* B45196H5226+30* B45196H5226+40* B45196H5336+30* ● B45196H5336+40* B45196H5336+50* B45196H5476+40* B45196H5476+50* B45196H5686+50* B45196H5107+50* ● Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap CR Case size (20 °C, 120 Hz) DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) µF % µA 1.5 A 0.5 6 1.5 B 0.5 6 1.5 C 0.6 6 2.2 A 0.8 6 2.2 B 0.8 6 2.2 C 0.8 6 3.3 B 1.2 6 3.3 C 1.2 6 4.7 B 1.6 6 4.7 C 1.6 6 4.7 D 1.7 6 6.8 C 2.4 6 6.8 D 2.4 6 C 3.5 10 6 D 3.5 10 6 C 5.3 15 6 D 5.3 15 6 D 7.7 22 6 E 7.7 22 6 D 11.6 33 8 E 12.0 33 6 E 16.0 47 6 VR (up to 85 °C) = 50 VDC, VR (up to 125 °C) = 33 VDC 0.1 A 0.5 4 0.15 A 0.5 4 0.15 B 0.5 4 0.22 A 0.5 4 0.22 B 0.5 4 0.33 B 0.5 4 0.47 B 0.5 4 0.47 C 0.5 4 0.68 C 0.5 4 C 0.5 1 4 1.5 C 0.8 6 Zmax (20 °C, 100 kHz) Ω 7.5 6.0 4.8 4.5 4.0 3.2 3.5 2.4 3.1 2.0 1.5 1.8 1.2 1.6 1.0 1.4 0.8 0.8 0.8 0.9 0.8 0.9 Ordering code 27.0 22.0 22.0 18.0 18.0 14.0 9.0 7.2 6.4 4.8 4.4 B45196E7104+10* B45196H7154+10* B45196E7154+20* B45196H7224+10* B45196E7224+20* B45196E7334+20* B45196H7474+20* B45196E7474+30* B45196E7684+30* B45196E7105+30* B45196H7155+30* ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 16 of 20 B45196H6155+10* ● B45196H6155+20* B45196E6155+30* B45196H6225+10* ● B45196H6225+20* B45196E6225+30* B45196H6335+20* B45196E6335+30* B45196H6475+20* ● B45196H6475+30* B45196E6475+40* B45196H6685+30* B45196E6685+40* B45196H6106+30* B45196E6106+40* B45196H6156+30* ● B45196H6156+40* B45196H6226+40* B45196H6226+50* B45196H6336+40* ● B45196H6336+50* B45196H6476+50* Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap CR Case size (20 °C, 120 Hz) µF 1.5 2.2 2.2 3.3 3.3 4.7 6.8 6.8 10 10 15 D C D C D D D E D E E DFmax Ileak,max (20 °C, 120 Hz) (20 °C, VR, 5 min) % µA 0.8 6 1.1 6 1.1 6 1.7 6 1.7 6 2.4 6 3.4 6 3.4 6 5.0 8 5.0 6 7.5 6 Zmax (20 °C, 100 kHz) Ω 4.0 3.2 2.8 2.5 1.6 1.2 0.8 0.8 0.8 0.8 0.9 ● Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. + = Capacitance tolerance M = ±20% K = ±10% Page 17 of 20 Ordering code B45196E7155+40* B45196H7225+30* B45196E7225+40* B45196H7335+30* B45196E7335+40* B45196E7475+40* B45196H7685+40* B45196H7685+50* B45196H7106+40* ● B45196H7106+50* B45196H7156+50* Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Cautions and warnings When using tantalum capacitors with a manganese dioxide coating, the following cautions and warnings should be taken into account: Polarity Because tantalum capacitors are polar capacitors, it is important to observe their polarity markings (positive pole on the anode, negative pole on the cathode). Any incorrect polarity resulting from the sum of the AC and DC voltage components must be smaller than or equal to the permitted polarity reversal voltage. To avoid reducing their reliability, this voltage may only occur for a short time, at most five times for a duration of one minute per hour. Voltage The maximum continuous voltage depends on the ambient temperature. Within the temperature range of 55 to +85 °C, the rated voltage is equal to the maximum continuous voltage. Between + 85 and + 125 °C the maximum continuous voltage must be reduced linearly from the full rated voltage to 2/3 of it (derating). At 150 °C (only B4519*P series) the voltage must be reduced to 1/2 and at 175 °C (only B4519*T series) to 1/3 of the rated voltage. Operation below the maximum continuous voltage has a positive effect on the capacitor’s failure rate. The maximum continuous voltage must not be exceeded. All unfavourable operating conditions (such as possible line overvoltages, unfavourable tolerances of the transformation ratio of the line transformer in the equipment, repeated overvoltages when the equipment is switched on, high ambient temperatures) must be taken into account when determining the operating voltage. The surge voltage is the maximum voltage (peak value) that may be applied to the capacitor for short periods, at most five times for a total duration of up to 1 minute per hour. The surge voltage must not be applied for periodic charging and discharging in the course of normal operation and cannot be part of the operating voltage. The permissible surge voltage for all capacitors in this data book is 1.3 x the rated voltage. The occurrence of voltage impulses (transient voltages) that exceed the surge voltage may lead to irreparable damage. Capacitance The actual capacitance of a capacitor can deviate from the rated capacitance by as much as the full magnitude of the tolerance at delivery. The capacitance varies with the temperature (at +125 °C +12% up to +20%) and decreases with increasing frequency. Please read Important notes and Cautions and warnings at the end of this document. Page 18 of 20 Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H Standard / HighCap Low-resistance applications and voltage networks For low-resistance applications, KEMET recommends a maximum operating voltage of half the permissible maximum continuous voltage, so that the capacitors have sufficient tolerance to withstand voltage peaks. Depending on the conditions of use, the early failure rate is higher here by a factor of 2 to 20 than in the range with a constant failure rate as specified in the data book. When operated directly in a voltage network, the capacitor should be protected against overvoltage, e.g. by a suppressor diode, and against polarity reversal by a diode. If a capacitor is operated in an unprotected low-impedance circuit and fails because the permissible conditions for the forward DC voltage, reverse DC voltage, surge current, power dissipation or temperature are exceeded, the continued current flow through the overstressed capacitor may produce overheating. The overheated capacitor may damage the surrounding components and the circuit board. Storage conditions Capacitors with solid electrolyte may be stored at temperatures down to –80 °C. The upper storage temperature must not exceed +85 °C (for blister tape the temperature limit is +40 °C). The storage conditions should not exceed +40 °C and 70% R. H. A drypack is useful to prevent the effects of humidity. Please read Important notes and Cautions and warnings at the end of this document. Page 19 of 20 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, KEMET is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a KEMET product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). Page 20 of 20