Driving the LPC1300 with Murata resonators

R_10003
Driving the LPC1300 with Murata resonators
Rev. 1.1 — 21 November 2013
Report
Document information
Info
Content
Keywords
LPC1311FHN33; LPC1313FHN33; LPC1313FBD48; LPC1342FHN33;
LPC1342FBD48; LPC1343FHN33; LPC1343FBD48
Abstract
Characterization results of Murata resonators for LPC1300
R_10003
NXP Semiconductors
Driving the LPC1300 with Murata resonators
Revision history
Rev
Date
Description
1.1
20131121
Corrected link, added LPC1342FBD48.
1
20100504
Initial release
Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
R_10003
Report
All information provided in this document is subject to legal disclaimers.
Rev. 1.1 — 21 November 2013
© NXP B.V. 2013. All rights reserved.
2 of 5
R_10003
NXP Semiconductors
Driving the LPC1300 with Murata resonators
1. Introduction
The LPC1300 series microcontrollers are based on the ARM Cortex-M3 core operating at
up to 72 MHz. These low power 32-bit microcontrollers feature serial interfaces including
USB, UART, and I2C. The controllers are ideal for applications such as eMetering,
medical, POS, and industrial networking.
The LPC1300 devices have an integrated IRC oscillator. On the LPC1300, the IRC is
nominally 12 MHz and accurate within 1 % over temperature and voltage. Many
applications can utilize the IRC as the clock source; others may use a suitable crystal for
more accuracy, particularly for USB applications. The LPC1300 device can also use a
resonator as a clock source.
2. Characterization results
Based on characterization results, the following tables detail the most suitable devices
available from Murata. Note that devices from other manufacturers can also be used.
Table 1.
Recommended devices (for consumer)
VDD: 2.0 V to 3.6 V; 40 to +85 C
[1]
Device
Freq.
[MHz]
Type
Part number
Supply
Temp. range
voltage range
LPC1311
LPC1313
LPC1342
LPC1343
2
SMD
CSTCC2M00G56-R0
2.0 to 3.6
[1]
4
CSTCR4M00G55-R0
8
CSTCE8M00G55-R0
16
CSTCE16M0V53-R0
25
CSTCW25M0X51-R0
40 to +85 C
These resonators have load capacitors included so external load capacitors are not necessary.
Suffix indicates packaging style.
SMD type[ -R0:Plastic tape package( = 180mm), -B0:Bulk]
For the LPC parts with USB (LPC1343 and LPC1342), the following resonators are
recommended.
Table 2.
Recommended devices (for consumer)
VDD: 2.0 V to 3.6 V; 40 to +85 C
[1]
Device
Freq.
[MHz]
Type
Part number
Supply
Temp. range
voltage range
LPC1342
LPC1343
12
SMD
CSTCE12M0GH5L**-R0
2.0 to 3.6
16
SMD
CSTCE16M0VH3L**-R0
[1]
40 to +85 C
These resonators have load capacitors included so external load capacitors are not necessary.
“**” means temporary part number; formal part number will be applied after the frequency measurement
process on actual board by Murata.
Suffix indicates packaging style.
SMD type[ -R0:Plastic tape package( = 180mm), -B0:Bulk]
For more information and a detailed report please go to the Murata website
http://search.murata.co.jp/Ceramy/ICsearchAction.do?sLang=en and search for ‘LPC’.
R_10003
Report
All information provided in this document is subject to legal disclaimers.
Rev. 1.1 — 21 November 2013
© NXP B.V. 2013. All rights reserved.
3 of 5
R_10003
NXP Semiconductors
Driving the LPC1300 with Murata resonators
3. Legal information
3.1
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
3.2
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
R_10003
Report
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
3.3
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
All information provided in this document is subject to legal disclaimers.
Rev. 1.1 — 21 November 2013
© NXP B.V. 2013. All rights reserved.
4 of 5
R_10003
NXP Semiconductors
Driving the LPC1300 with Murata resonators
4. Contents
1
2
3
3.1
3.2
3.3
4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Characterization results . . . . . . . . . . . . . . . . . .
Legal information. . . . . . . . . . . . . . . . . . . . . . . .
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3
4
4
4
4
5
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2013.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 21 November 2013
Document identifier: R_10003