ES_LPC407x/8x Errata sheet LPC407x/8x Rev. 1 — 24 September 2012 Errata sheet Document information Info Content Keywords LPC407x, LPC408x, errata Abstract This errata sheet describes both the known functional problems and any deviations from the electrical specifications known at the release date of this document. Each deviation is assigned a number and its history is tracked in a table. ES_LPC407x/8x NXP Semiconductors Errata sheet LPC407x/8x Revision history Rev Date 1 20120924 Description • Initial version Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] ES_LPC407X_8X Errata sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 24 September 2012 © NXP B.V. 2012. All rights reserved. 2 of 6 ES_LPC407x/8x NXP Semiconductors Errata sheet LPC407x/8x 1. Product identification The LPC407x/8x devices typically have the following top-side marking: LPC40xxXXX xxxxxxx xxYYWWR[x] The last digit in the last line (field 'R') will identify the device revision. Note: pre-production parts are marked differently and this system does not apply. This Errata Sheet covers the following revisions of the LPC407x/8x: Table 1. Device revision table Revision identifier (R) Revision description ‘-’ Initial device revision Field ‘YY’ states the year the device was manufactured. Field ‘WW’ states the week the device was manufactured during that year. 2. Errata overview Table 2. Functional problems table Functional problems Short description Revision identifier Detailed description n/a n/a n/a n/a Table 3. AC/DC deviations table AC/DC deviations Short description Revision identifier Detailed description n/a n/a n/a n/a Table 4. Errata notes Note Short description Revision identifier Detailed description Note.1 During power-up, an unexpected glitch (low pulse) could occur on the port pins as the VDD supply ramps up. ‘-’ Section 5.1 ES_LPC407X_8X Errata sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 24 September 2012 © NXP B.V. 2012. All rights reserved. 3 of 6 ES_LPC407x/8x NXP Semiconductors Errata sheet LPC407x/8x 3. Functional problems detail n/a 4. AC/DC deviations detail n/a 5. Errata notes 5.1 Note.1 The General Purpose I/O (GPIO) pins have configurable pull-up/pull-down resistors where the pins are pulled up to the VDD level by default. During power-up, an unexpected glitch (low pulse) could occur on the port pins as the VDD supply ramps up. ES_LPC407X_8X Errata sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 24 September 2012 © NXP B.V. 2012. All rights reserved. 4 of 6 ES_LPC407x/8x NXP Semiconductors Errata sheet LPC407x/8x 6. Legal information 6.1 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. 6.2 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or ES_LPC407X_8X Errata sheet malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. 6.3 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. All information provided in this document is subject to legal disclaimers. Rev. 1 — 24 September 2012 © NXP B.V. 2012. All rights reserved. 5 of 6 ES_LPC407x/8x NXP Semiconductors Errata sheet LPC407x/8x 7. Contents 1 2 3 4 5 5.1 6 6.1 6.2 6.3 7 Product identification . . . . . . . . . . . . . . . . . . . . Errata overview . . . . . . . . . . . . . . . . . . . . . . . . . Functional problems detail . . . . . . . . . . . . . . . . AC/DC deviations detail . . . . . . . . . . . . . . . . . . Errata notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . Note.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 4 4 4 4 5 5 5 5 6 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 24 September 2012 Document identifier: ES_LPC407X_8X