BGD712C 750 MHz, 18.5 dB gain power doubler amplifier Rev. 02 — 16 August 2007 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module in SOT115J package operating at a supply voltage of 24 V (DC). CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. 1.2 Features n n n n n n Excellent linearity Extremely low noise Excellent return loss properties Silicon nitride passivation Rugged construction Gold metallization ensures excellent reliability 1.3 Applications n CATV systems operating in the 40 MHz to 750 MHz frequency range. 1.4 Quick reference data Table 1: Quick reference data Symbol Parameter Conditions Min Typ Max Unit Gp power gain f = 45 MHz 18.2 - 18.8 dB f = 750 MHz 19 - 20 dB 380 - 410 mA Itot [1] total current VB = 24 V [1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. BGD712C NXP Semiconductors 750 MHz, 18.5 dB gain power doubler amplifier 2. Pinning information Table 2: Pinning Pin Description 1 input 2 common 3 common 5 +VB 7 common 8 common 9 output Simplified outline Symbol 5 1 3 5 7 9 1 9 2 3 7 8 sym095 3. Ordering information Table 3: Ordering information Type number BGD712C Package Name Description Version - rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 × 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J 4. Limiting values Table 4: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VB Vi Conditions Min Max Unit supply voltage - 30 V input voltage - 70 dBmV Tstg storage temperature −40 +100 °C Tmb mounting base temperature −20 +100 °C BGD712C_2 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 02 — 16 August 2007 2 of 7 BGD712C NXP Semiconductors 750 MHz, 18.5 dB gain power doubler amplifier 5. Characteristics Table 5: Characteristics Bandwidth 40 MHz to 750 MHz; VB = 24 V; Tmb = 35 °C; ZS = ZL = 75 Ω. Symbol Parameter Conditions Min Typ Max Unit Gp power gain f = 45 MHz 18.2 - 18.8 dB f = 750 MHz 19.0 - 20.0 dB SL slope cable equivalent f = 45 MHz to 750 MHz 0.5 - 1.5 dB FL flatness of frequency response f = 45 MHz to 100 MHz - - ±0.35 dB f = 100 MHz to 700 MHz - - ±0.5 dB f = 700 MHz to 750 MHz - - ±0.15 dB S11 input return losses f = 45 MHz to 790 MHz 17 - - dB S22 output return losses f = 45 MHz to 790 MHz 17 - - dB ϕs21 phase response f = 50 MHz 135 - 225 deg CTB composite triple beat 112 channels flat; Vo = 44 dBmV; measured at 745.25 MHz - - −62 dB 60 channels flat; Vo = 44 dBmV measured at 745.25 MHz - −67 - dB 79 channels flat; Vo = 44 dBmV measured at 547.25 MHz - - −68 dB 112 channels flat; Vo = 44 dBmV; measured at 746.5 MHz - - −63 dB 60 channels flat; Vo = 44 dBmV measured at 746.5 MHz - −70 - dB 79 channels flat; Vo = 44 dBmV measured at 548.5 MHz - - −68 dB f = 50 MHz - - 7 dB - - 7 dB 380 - 410 mA CSO NF composite second-order distortion noise figure f = 750 MHz total current Itot [1] [1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. BGD712C_2 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 02 — 16 August 2007 3 of 7 BGD712C NXP Semiconductors 750 MHz, 18.5 dB gain power doubler amplifier 6. Package outline Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J D E Z p A2 1 2 3 5 7 8 9 A L F S W c e b w M e1 d U2 q2 Q B y M B q1 x M B y M B p U1 q 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c d D E max. max. max. e e1 F L min. p 4.15 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 3.85 0.38 Q max. q JEDEC q2 S U1 U2 W w x 2.4 38.1 25.4 10.2 4.2 44.75 8.2 6-32 0.25 0.7 44.25 7.8 UNC REFERENCES IEC q1 JEITA EUROPEAN PROJECTION y Z max. 0.1 3.8 ISSUE DATE 99-02-06 04-02-04 SOT115J Fig 1. Package outline SOT115J BGD712C_2 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 02 — 16 August 2007 4 of 7 BGD712C NXP Semiconductors 750 MHz, 18.5 dB gain power doubler amplifier 7. Revision history Table 6: Revision history Document ID Release date Data sheet status Change notice Supersedes BGD712C_2 20070816 Product data sheet - BGD712C_1 Modifications: BGD712C_1 • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • • Legal texts have been adapted to the new company name where appropriate. Changed descriptive title 20060502 Product data sheet BGD712C_2 Product data sheet - - © NXP B.V. 2007. All rights reserved. Rev. 02 — 16 August 2007 5 of 7 BGD712C NXP Semiconductors 750 MHz, 18.5 dB gain power doubler amplifier 8. Legal information 8.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 8.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 8.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 8.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 9. Contact information For additional information, please visit: http://www.nxp.com For sales office addresses, send an email to: [email protected] BGD712C_2 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 02 — 16 August 2007 6 of 7 BGD712C NXP Semiconductors 750 MHz, 18.5 dB gain power doubler amplifier 10. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 8.1 8.2 8.3 8.4 9 10 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 3 4 5 6 6 6 6 6 6 7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 16 August 2007 Document identifier: BGD712C_2