Analog Solutions—Robust Reliable Performance PF3001 PF Series 10-Channel Configurable PMIC Overview Target Applications The PF3001 power management integrated circuit (PMIC) features a configurable architecture •Navigation that supports numerous outputs with various current ratings as well as programmable voltage and predefined sequencing. This enables the PF3001 to power the core processor, external • Human-machine interface memory and peripherals to provide a single-chip system power solution in multiple applications, • Home automation reducing design complexity and lowering overall bill of materials. In consumer and industrial • Industrial embedded board environments the high-performance architecture offers a cost optimized solution for “always ON” applications while PF3000 enables Low Power implementation. • Point of sale (POS) terminals The PF3001 is ideally suited for i.MX 6UL applications processors, and can also meet the power consumption requirements for other low end i.MX 6 series, including the i.MX 6Solo, i.MX 6SoloLite, i.MX 6SoloX and i.MX 7 series. The pin to pin compatibility with the PF3000 makes the i.MX and PF3000/1 solution scalable and allows to reuse the current Board Support Package (BSP) used in multiple reference designs. This provides customers with a platformlevel solution from a single supplier to enable faster time to market and reduces engineering effort. PF3001 Functional Internal Block Diagram PF3001 Functional Internal Block Diagram Fixed OTP Configuration Voltage and PWRON Configuration Fixed DVS Speed Fixed Sequence and Timing Fixed Phasing and Frequency Fixed Power Generation Switching Regulators Linear Regulators SW1 (0.7 V to 1.425 V, 1.8 V, 3.3 V, 2.75 A) VCC_SD (1.80 V or 1.85 V, 100 mA) or (2.85 V or 3.3 V, 100 mA) Bias and References Internal Core Voltage Reference SW2 ( 1.5 V to 1.85 V, 1.25 A) or (2.5 V to 3.30 V, 1.25 A) V33 ( 2.85 V to 3.30 V, 350 mA) SW3 (0.90 V to 1.65 V, 1.5 A) VLDO2 (0.80 V to 1.55 V, 250 mA) Logic and Control Parallel MCU Interface Regulator Control VLDO1 (1.8 V to 3.3 V, 100 mA) I2C Communication and Registers VLDO3 (1.8 V to 3.3 V, 100 mA) Fault Detection and Protection VLDO4 (1.8 V to 3.3 V, 350 mA) Thermal Current Limit VPWR Front End LDO Overvoltage Indicator manufacturer VSNVS (1.0 V to 3.0 V, 1.0 mA) RTC supply with coin cell charger • Internet of Things (IoT) Low-Cost Simplifiy Efficiency Product Differentiation Features Benefits 4 Buck Converters with DVS in RUN mode High efficiency (> 90%) with Voltage scaling drive to lower power dissipation 6 LDOs, + coin cell charger, and RTC supply Supply multiple peripherals, lowering external component count Forced PFM (Pulse Frequency Modulation), APS (Auto Pulse Skip) or PWM operation Higher light load efficiency – longer battery standby time Programmable output voltage, timing Ensure scalability across platforms (multiple i.MX applications processors usage) 5 V voltage input compatibility Simplify bill of materials by alleviating the need for a 5 V to 4.5 V converter I2C digital interface for programmability On the fly voltage scaling for better system efficiency, regulator management for versatility Preprogrammed versions, optimized for dedicated i.MX applications processors versions Reduces design efforts since the PMICs are designed for compatibility with the i.MX applications processors 7 x 7 mm QFN power package Allows 4 layer printed circuit boards (PCBs) Features Easy to Use Tools • 2.8 V to 5.5 V input voltage • GUI and evaluation systems available to test efficiency and temperature rise • 10-channel, 6.6 A total power delivery • Technical and hands-on training available upon request • 3-channel configurable buck converters • Forced PWM/PFM or APS operation Product Core Market Ambient Temperature • 6 user programmable LDOs MC32PF3001 Consumer -40C° to +85C° • Coin cell charger MC34PF3001 Industrial -40C° to +105C° Title Description • Programmable output voltage, current limit, soft-start, FSW, fault interrupt • Pin compatible with PF3000 Freescale Document Number • High power 7 x 7 mm QFN package PF3001 PF3001 Data Sheet • Consumer, industrial grades available SG1002 Analog Product Selector Guide Selector Guide SG200 Industrial Product Selector Guide Selector Guide PF3001 PMIC Enablement KITPF3000FRDMEVM • Generic family evaluation (Common platform with PF3000) • Friendly graphical user interface with specific PF3000 or PF3001 display • USB interface Complete Technical Documentation Available • Datasheet, application notes, EVM user guide For more information visit freescale.com/PMIC Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. SMARTMOS is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2015 Freescale Semiconductor, Inc. Document Number: PF3001FS REV 1