Part Number: KPS-5130PD7C PRELIMINARY SPEC RGB Color Sensor KPS-5130PD7C Description ●The KPS-5130PD7C Color Sensor Device, consisting of 3-Channel/1Chip (R, G, B) Si photodiode, is a good effective solution to color balance of display backlighting appliances. Features *Lead-free package. *Component in accordance with RoHS. *SMD style package on PCB technology. *Integral Color Filter in Blue, Green,or Red. * Package:1.5KPCS/Reel. * RoHS Compliant. *Applications The devices are suitable for : *colorimetry. *printing process control. UNIT : MM[INCH] *display color correction. TOLERANCE :±0.1[± 0.004] UNLESS OTHERWISE NOTED. *Absolute Maximum Ratings(Ta=25°C unless otherwise specified) Parameter Symbol Value Unit VR 10 V Operating Temperature Topr -40~+85 ºC Storage Temperature Tsto -40~+85 ºC Soldering Temperature Tsd 260 ºC Reverse Voltage SPEC NO: DSAH0613 REV NO: V.10 DATE: FEB/05/2009 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Y.F.Lu EPR:1207100001 Part Number: KPS-5130PD7C *Electro-optical Characteristics(Ta=25°C unless otherwise specified) Value Parameter Symbol Condition λp Peak Sensitivity Wavelength Light Current(1) IL1 Light Current(2) IL2 Unit Min. Typ Max. Red - 620 - Green - 550 - Blue - 470 - Red - 0.039 - Green - 0.042 - Blue - 0.022 - Red - 0.427 - Green - 0.498 - Blue - 0.262 - 100Lux [1] VR = 5V 1000Lux [1] VR = 5V nm uA uA Diameter of the irradiation sensitive area D - 2.0 - mm Irradiation sensitive area per element A - 0.85 - mm2 Photo sensibility of the single color areas SMax λ R=620 nm λ G=550 nm λ B=470 nm - 0.33 0.25 0.18 - A/W Reverse Dark Current ID VR=5V - - 10 nA Note: 1.White fluorescent light (Color Temperature = 6500K) is used as light source. SPEC NO: DSAH0613 REV NO: V.10 DATE: FEB/05/2009 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Y.F.Lu EPR:1207100001 Part Number: KPS-5130PD7C Typical Electro - Optical Characteristics Curves Fig.4 R,G,B LED Test vs. Output Photocurrent 7 Oput Current(uA) 6 Input Pow er=1mW/cm2 5 4 3 2 1 0 RLED=626nmn FWHM=20nm GLED=520nmn FWHM=35nm BLED=461nmn FWHM=20nm Fig.5 R,G,B LED Test vs. Output Photocurrent 80 Oput Current(uA) 70 Input Pow er=10mW/cm2 60 50 40 30 20 10 0 RLED=626nmn FWHM=20nm GLED=520nmn FWHM=35nm BLED=461nmn FWHM=20nm SPEC NO: DSAH0613 REV NO: V.10 DATE: FEB/05/2009 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Y.F.Lu EPR:1207100001 Part Number: KPS-5130PD7C KPS-5130PD7C Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH0613 REV NO: V.10 DATE: FEB/05/2009 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Y.F.Lu EPR:1207100001 Part Number: KPS-5130PD7C PACKING & LABEL SPECIFICATIONS KPS-5130PD7C SPEC NO: DSAH0613 REV NO: V.10 DATE: FEB/05/2009 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Y.F.Lu EPR:1207100001