3.2mmx3.6mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: APF3236SURKVGAPBA ATTENTION Hyper Red Green Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx3.6mm SMT LED, 1.1mm thickness. The Hyper Red source color devices are made with z Low power consumption. AlGaInP on GaAs substrate Light Emitting Diode. z One red, one green and one blue chips in one package. The Green source color devices are made with InGaN on z Can produce any color in visible spectrum, including G-SiC Light Emitting Diode. white light. The Blue source color devices are made with InGaN z Package : 1000pcs / reel. on SiC Light Emitting Diode. z Moisture sensitivity level : level 3. Static electricity and surge damage the LEDS. z RoHS compliant. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5709 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/02/2009 DRAWN: S.M.Wu PAGE: 1 OF 7 ERP: 1203005400 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 70 220 50 150 18 60 Hyper Red (AlGaInP) APF3236SURKVGAPBA Green (InGaN) Viewing Angle [1] WATER CLEAR Blue (InGaN) 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Green Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 650 520 468 nm IF=20mA Hyper Red Green Blue 630 525 470 nm IF=20mA Spectral Line Half-width Hyper Red Green Blue 28 35 21 nm IF=20mA C Capacitance Hyper Red Green Blue 35 100 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 1.95 3.2 3.2 2.5 4 4 V IF=20mA IR Reverse Current Hyper Red Green Blue 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 120 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 100 100 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5709 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/02/2009 DRAWN: S.M.Wu PAGE: 2 OF 7 ERP: 1203005400 APF3236SURKVGAPBA Hyper Red SPEC NO: DSAG5709 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/02/2009 DRAWN: S.M.Wu PAGE: 3 OF 7 ERP: 1203005400 Green SPEC NO: DSAG5709 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/02/2009 DRAWN: S.M.Wu PAGE: 4 OF 7 ERP: 1203005400 Blue SPEC NO: DSAG5709 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/02/2009 DRAWN: S.M.Wu PAGE: 5 OF 7 ERP: 1203005400 APF3236SURKVGAPBA Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAG5709 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/02/2009 DRAWN: S.M.Wu PAGE: 6 OF 7 ERP: 1203005400 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG5709 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu APF3236SURKVGAPBA DATE: APR/02/2009 DRAWN: S.M.Wu PAGE: 7 OF 7 ERP: 1203005400