56.8mm (2.3 INCH) 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY Part Number: PSA23-11GWA Green Features Description z 2.3 inch character height. The Green source color devices are made with Gallium z Low current operation. Phosphide Green Light Emitting Diode. z High contrast and light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080 Selection Guide Dice Part No. PSA23-11GWA Iv (ucd) [1] @ 10mA Lens Type GREEN (GaP) Description Min. Typ. 5600 14000 *1400 *3700 Common Anode, Rt. Hand Decimal. White Diffused Note: 1. Luminous Intensity/ Luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λ peak Peak Wavelength Green 565 nm IF=20mA λ D[1] Dominant Wavelength Green 568 nm IF=20mA Δλ 1/2 Spectral Line Half-width Green 30 nm IF=20mA Capacitance Green 15 pF VF=0V;f=1MHz C A1,A2,D1,D2,P,K 4.4 VF[2] B,C,E,F,G,H,J,L,M,N Forward Voltage 5.0 Green V DP 2.2 2.5 A1,A2,D1,D2,P,K IR Reverse Current (Per chip) B,C,E,F,G,H,J,L,M,N IF=20mA 10 20 10 Green DP uA VR = 5V VR = 5V VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter A1,A2,D1,D2,P,K Power dissipation B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K DC Forward Current B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K Peak Forward Current [1] B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K Reverse Voltage (Per chip) B,C,E,F,G,H,J,L,M,N Green Units 125 250 62.5 mW 25 50 25 mA 140 280 140 mA 5 5 5 V DP Operating / Storage Temperature Lead Solder Temperature [2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080 GREEN Green PSA23-11GWA Note:the curves are on the DP. SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080 Note:the curves are on the segment b,c,e,f,g,h,j,l,m,n. SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080 Note:the curves are on the segment a1,a2,d1,d2,p,k. SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080 PACKING & LABEL SPECIFICATIONS PSA23-11GWA SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080 SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080