Series 800 Series 800 “Mighty Mouse” with UN Mating Thread Crimp Receptacle Ordering Information 800-010 and 800-011 A B C In-Line Rear Panel Jam Nut Mount Square Flange Mount Integral Band Platform for direct attachment of a cable Three Shell Options: Jam nut with o-ring for rear panel shield using a BAND-IT® strap. Install a boot, or overmold mounting, square flange or in-line receptacle for free-hanging onto the band platform. An accessory thread is available cables. for attaching strain reliefs and backshells. D HOW TO ORDER Sample Part Number E 8 0 0 - 0 11 -0 1 M 6-4 P N Series Shell Style Shell Material / Finish Shell Size- Insert Arrangement Contact Type Shell Key Position Connector supplied with contacts Normal F -01 In-Line G 800-010 M Receptacle with Banding Platform H J No. of Contacts C Aluminum / Black Anodize (Non-Conductive) RoHS Compliant Aluminum / Electroless Nickel RoHS Compliant NF -02 800-011 Receptacle with Accessory Thread Aluminum / Cadmium with Olive Drab Chromate Square Flange for Front or Rear ZN Mounting Aluminum / Zinc-Nickel with Olive Drab Chromate UCR Aluminum / Zinc-Cobalt with Black Chromate RoHS Compliant K -07 Jam Nut for Rear ZNU Panel Mounting Aluminum / Zinc-Nickel with Black Chromate L MT Aluminum / Nickel-PTFE RoHS Compliant Z1 Stainless Steel / Passivated RoHS Compliant M © 2009 Glenair, Inc. Arr. 5-3 6-1 6-4 6-7 7-1 7-10 8-2 8-13 8-200 9-4 9-19 9-200 9-201 10-5 10-26 10-200 10-201 10-202 12-2 12-3 12-7 12-37 12-200 12-201 #23 #20 #16 #12 3 1 4 7 1 10 2 13 4 2 4 19 4 2 8 2 5 26 12 1 4 2 8 2 2 3 7 37 6 2 10 2 N P Pin S Socket Connector supplied without contacts A Pin X Pos. X Y Pos. Y Z Pos. Z B Socket Connector Connectors with contacts are supplied with signal and/or power crimp contacts. These contacts are not installed. Coaxial contacts and nonstandard signal contacts are ordered separately. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-6 Rev. 01-FEB-2009 E-Mail: [email protected] Series 800 Series 800 “Mighty Mouse” with UN Mating Thread Jam Nut Crimp Receptacle Dimensions 800-010-07 and 800-011-07 Accessory Thread 800-011-07 Integral Band Platform 800-010-07 E MAX .460 (11.7) ØA A H MAX .460 (11.7) B C FLAT ØF C J THREAD D THREAD D THREAD G G B FLATS D .125 (3.2) MAX PANEL THICKNESS SHELL SIZE 5 & 6 .100 (2.5) MAX PANEL THICKNESS SHELL SIZE 7 & UP .125 (3.2) MAX PANEL THICKNESS SHELL SIZE 5 & 6 .100 (2.5) MAX PANEL THICKNESS SHELL SIZE 7 & UP E DIMENSIONS Shell Size 5 6 7 8 9 10 12 ØA In. mm. .541 .610 .670 .775 .875 .980 1.062 13.74 15.49 17.02 19.69 22.23 24.89 26.97 B C In. mm. In. mm. .500 .562 .635 .735 .806 .940 .986 12.70 14.27 16.13 18.67 20.47 23.88 25.04 .285 .352 .411 .473 .530 .604 .712 7.24 8.94 10.44 12.01 13.46 15.34 18.08 D Threads Mating .3125-28 UN-2A .3750-28 UN-2A .4375-28 UNEF-2A .5000-32 UN-2A .5625-32 UN-2A .6250-32 UN-2A .7500-28 UN-2A F E Max. In. mm. ØF In. mm. ØG In. mm. H Max. In. mm. .875 .875 .875 .875 .875 .875 .875 .230 .286 .390 .445 .500 .565 .650 .051 .051 .093 .093 .093 .093 .093 .850 .850 .850 .850 .850 .850 .850 22.22 22.22 22.22 22.22 22.22 22.22 22.22 SERIES 800 PANEL CUTOUTS 5.84 7.26 9.91 11.30 12.70 14.35 16.51 1.30 1.30 2.36 2.36 2.36 2.36 2.36 21.59 21.59 21.59 21.59 21.59 21.59 21.59 J Threads Accessory .250-32 UNEF-2A .3125-32 UNEF-2A .4375-28 UNEF-2A .5000-28 UNEF-2A .5625-24 UNEF-2A .6250-24 UNEF-2A .6875-24 UNEF-2A G H SERIES 800 KEY POSITIONS J øB 60° 60° A FLAT Z° Y° NORMAL X° Shell Size 5 6 7 8 9 10 12 A Flat In. .302 / .298 .365 / .361 .424 / .420 .486/ .482 .543/ .539 .617/.613 .725/.721 © 2009 Glenair, Inc. In. .318 .386 .449 .510 .574 .635 .760 mm. 8.08 9.80 11.40 12.95 14.58 16.12 19.30 K Plug Receptacle Key Position Key Rotation Normal (N) X Y Z 150° 140° 130° 120° øB mm. 7.67/ 7.57 9.27/9.17 10.77/ 10.67 12.34/ 12.24 13.79/ 13.69 15.67/ 15.57 18.42/ 18.31 Z° Y° X° NORMAL Shell size 5 and 6: master key is located at top dead center for normal (N) position. Shell size 7 thru 12: master key is rotated 90° from TDC. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-7 Rev. 01-FEB-2009 E-Mail: [email protected] L M Series 800 Series 800 “Mighty Mouse” with UN Mating Thread Square Flange Crimp Receptacle Dimensions 800-010-02 and 800-011-02 Integral Band Platform 800-010-02 A Accessory Thread 800-011-02 G MAX ØC J MAX E THREAD E THREAD B A SQ B BSC ØF 4X Ø D THRU HOLE .320 (8.1) SHELL SIZE 5 & 6 .460 (11.7) SHELL SIZE 7 THRU 12 C H THREAD D .039 (.10) SHELL SIZE 5 & 6 .050 (1.27) SHELL SIZE 7 THRU 12 E DIMENSIONS F G H Shell Size 5 6 7 8 9 10 12 A SQ In. mm. .527 .588 .650 .710 .938 .938 1.031 13.39 14.92 16.51 18.03 23.83 23.83 26.19 B In. mm. .363 .423 .483 .542 .719 .719 .812 9.22 10.74 12.27 13.77 18.26 18.26 20.62 ØD ØC In. mm. In. mm. ± .005 ± 0.13 .680 .750 .830 .938 1.250 1.250 1.375 17.27 19.05 21.08 23.83 31.75 31.75 34.93 .094 .094 .128 .128 .128 .128 .128 2.39 2.39 3.25 3.25 3.25 3.25 3.25 E Threads Mating .3125-28 UN-2A .3750-28 UN-2A .4375-28 UNEF-2A .5000-32 UN-2A .5625-32 UN-2A .6250-32 UN-2A .7500-28 UN-2A In. ØF mm. .230 .286 .390 .445 .500 .565 .650 5.84 7.26 9.91 11.30 12.70 14.35 16.51 G Max. In. mm. .750 .750 .825 .825 .825 .825 .825 19.05 19.05 20.96 20.96 20.96 20.96 20.96 J Max. In. mm. H Threads Accessory .250-32 UNEF-2A .3125-32 UNEF-2A .4375-28 UNEF-2A .5000-28 UNEF-2A .5625-24 UNEF-2A .6250-24 UNEF-2A .6875-24 UNEF-2A .725 .725 .800 .800 .800 .800 .800 18.42 18.42 20.32 20.32 20.32 20.32 20.32 SERIES 800 KEY POSITIONS J K Key Position Key Rotation Normal (N) 150° X 140° Y 130° 60° 60° Z° L M Z 120° NORMAL Z° Y° X° NORMAL Y° X° Shell size 5 and 6: master key is located at top dead center for normal (N) position. Shell size 7 thru 12: master key is rotated 90° from TDC. © 2009 Glenair, Inc. Plug Key Position Receptacle Key Position Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-8 Rev. 01-FEB-2009 E-Mail: [email protected] Series 800 Series 800 “Mighty Mouse” with UN Mating Thread In-Line Crimp Receptacle Dimensions 800-010-01 and 800-011-01 Integral Band Platform 800-010-01 A FLATS C THREAD D MAX Accessory Thread 800-011-01 F MAX C THREAD A G THREAD øB B øE C .320 (8.1) SHELL SIZE 5 & 6 .460 (11.7) SHELL SIZE 7 THRU 12 .039 (.10) SHELL SIZE 5 & 6 .050 (1.27) SHELL SIZE 7 THRU 12 D E DIMENSIONS Shell Size 5 6 7 8 9 10 12 A ØB mm. In. mm. In. .312 .375 .445 .550 .613 .675 .800 7.92 9.53 11.30 13.97 15.57 17.15 20.32 .355 .400 .490 .600 .663 .725 .850 9.02 10.16 12.45 15.24 16.84 18.42 21.59 C Threads Mating .3125-28 UN-2A .3750-28 UN-2A .4375-28 UNEF-2A .5000-32 UN-2A .5625-32 UN-2A .6250-32 UN-2A .7500-28 UN-2A D Max. In. mm. In. .750 .750 .825 .825 .825 .825 .825 .230 .286 .390 .445 .500 .565 .650 19.05 19.05 20.96 20.96 20.96 20.96 20.96 ØE mm. 5.84 7.26 9.91 11.30 12.70 14.35 16.51 F Max. In. mm. .725 .725 .800 .800 .800 .800 .800 18.42 18.42 20.32 20.32 20.32 20.32 20.32 G Threads Accessory .250-32 UNEF-2A .3125-32 UNEF-2A .4375-28 UNEF-2A .5000-28 UNEF-2A .5625-24 UNEF-2A .6250-24 UNEF-2A .6875-24 UNEF-2A F G H SERIES 800 KEY POSITIONS Key Position Key Rotation Normal (N) 150° X 140° Y 130° Z 120° J 60° Z° Y° X° NORMAL Z° NORMAL Y° X° Shell size 5 and 6: master key is located at top dead center for normal (N) position. Shell size 7 thru 12: master key is rotated 90° from TDC for normal position. © 2009 Glenair, Inc. Plug Key Position K 60° L Receptacle Key Position Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-9 Rev. 01-FEB-2009 E-Mail: [email protected] M