Fiber Optic 181-056 GHD • Glenair High Density Fiber Optic Genderless Terminus Size 18 Non-Keyed Terminus Glenair High Density Size 18 Non-Keyed Front Release Glenair High Density (GHD) Genderless Terminus The Glenair High Density Fiber Optic Connector System is designed for applications that require reduced size and weight as well as outstanding optical and environmental performance. The System offers insertion loss values less than .5dB (typical loss for Glenair termini is .3 dB). Dense cavity spacing is acheived with an innovative front release terminus design and accomodation for M85045/16 cable. The genderless 18 gauge GHD contact delivers nearly double the density of M28876 and D38999 with superior optical performance. 1.112 Max C Retaining Clip Ø .081 Max Crimp Sleeve (see Table II) Ferrule ØA Ferrule Hole Ø 1.25mm Ferrule O.D. (.200) Spring Ø .102 Max Environmental Seal Material and Finish Ferrule: Zirconia Ceramic Terminus Assembly: Stainless Steel/Passivate Retaining Clip: Spring Alloy Spring: Stainless Steel/Passivate Seal: Fluorosilicone Crimp Sleeve: Brass Alloy/Nickel Tools and Accessories/Assembly Notes Crimp Sleeve is supplied with Terminus Assembly, and may be ordered separately (see Table II). For terminus less crimp sleeve, omit C from end of part number (e.g. 181-056-1260) See Glenair assembly procedure GAP-032 for complete termination instructions. © 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-28 Fiber Optic 181-056 GHD • Glenair High Density Fiber Optic Genderless Terminus Size 18 Non-Keyed Terminus Part Number ØA (Microns) Typ. Fiber Type 181-056-1250C 125.0 Single Mode 181-056-1255C 125.5 Single Mode 181-056-1260C 126.0 Single Mode OR Multi Mode 181-056-1270C 127.0 Multi Mode 181-056-1420C 142.0 Multi Mode 181-056-1450C 145.0 Multi Mode 181-056-1560C 156.0 Multi Mode 181-056-1570C 157.0 Multi Mode 181-056-1730C 173.0 Multi Mode 181-056-1750C 175.0 Multi Mode 181-056-2360C 236.0 Multi Mode 181-056-2860C 286.0 Multi Mode 181-056-4480C 448.0 Multi Mode C CRIMP SLEEVE Part Number 265-002 © 2011 Glenair, Inc. Description Crimp Sleeve Ø2.2mm Max Jacket CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-29