MIL-PRF-28876 Connectors 181-039 M29504/14 Style Front Release Pin Terminus Size 16 181-039-1260 C C = Crimp Sleeve Designator Omit if None (See Table II) Product Series Basic Number Dash Number (Table I) .900 (22.9) Max Retaining Clip Terminus Assembly .118 (3.0) .114 (2.9) Dia A Dia Ferrule Hole .080 (2.0) .074 (1.9) Dia .0788 .0787 Dia Crimp Sleeve (See Note 5) Environmental Seal A Dia (Microns) 1250 126.0 125.0 Designator 1255 126.5 125.5 C 1260 127.0 126.0 1270 128.0 127.0 1420 143.0 142.0 Ferrule Spring Washers TABLE II: CRIMP SLEEVE DESIGNATOR TABLE I: DASH NUMBER Assembly Dash Number .384 (9.8) .372 (9.4) (See Note 6) .158 (4.0) .102 (2.6) Min Max Dia TABLE III: TERMINUS ACCESSORIES Cable Diameter Part Number 2.0-2.4 mm (MIL-Spec) 265-008 Part Number Accessory 182-012 Crimp Tool 182-013 Insertion Tool, Straight 182-014 Insertion Tool, 90° 182-015 Removal Tool 182-017 Hand Polishing Tool Consult Factory for Additional Sizes APPLICATION NOTES 1. 2. Assembly packaged in plastic bag and tag identified with manufacturer’s name and part number. Material/ Finish: Ferrule: Zirconia Ceramic/ N.A. Terminus Assembly: Stainless Steel/ Passivate Retaining Clip, Spring Washers: Spring Alloy / N.A. Seal: Fluorosilicone Crimp Sleeve: Brass Alloy/Nickel © 2006 Glenair, Inc. 3. 4. 5. 6. CAGE Code 06324 Crimp Sleeve may be ordered separately (Table II). Metric dimensions (mm) are in parentheses Dummy Terminus: Part Number 181-051 Dimension to be measured when installed into insert equivalent fixture per MIL-PRF-29504/14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] D-3 www.glenair.com