High Density Connectors 181-047 GHD • Glenair High Density Fiber Optic Connection System 18 AWG Keyed Pin Terminus for APC Polish 181- 047 - 1260 C Product Series Basic Number Dash Number, Table 1 Optional Crimp Sleeve (Omit for None) 1.047 (26.6) Max .012 (3.0) Max Retaining Clip .080 (2.0) Max Dia. A .200 (5.1) Max A Dia. 1.25mm Dia. .079 (2.0) Max Dia. .201 (5.1) Max Spring .090 (2.3) Max Dia. O-Ring A .066 (01.7) Max .035 (00.9) Max VIEW A-A Crimp Sleeve APPLICATION NOTES 1. Material/ Finishes: Ferrule: Zirconia Ceramic/ N.A. Terminus Assembly: Stainless Steel/ Passivate Retaining Clip: Spring Alloy Spring: High Tensile Stainless Steel/ Passivate O-Ring: Fluorosilicone Crimp Sleeve: Brass Alloy/Nickel © 2006 Glenair, Inc. 2. Assembly packaged in plastic bag and tag identified with manufacturer’s name and part number. 3. Crimp Sleeve (265-002) may be ordered separately. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] C-4 www.glenair.com High Density Connectors 181-047 GHD • Glenair High Density Fiber Optic Connection System 18 AWG Keyed Pin Terminus for APC Polish TABLE I: DASH NUMBER Assembly Dash Number A Dia. Microns Fiber Type 181-047-1250 125.0 SM 181-047-1255 125.5 SM 181-047-1260 126.0 SM & MM 181-047-1270 127.0 MM 181-047-1420 142.0 MM 181-047-1450 145.0 MM 181-047-1560 156.0 MM 181-047-1570 157.0 MM 181-047-1730 173.0 MM 181-047-1750 175.0 MM 181-047-2360 236.0 MM 181-047-2850 285.0 MM 181-047-4480 448.0 MM SM = Singlemode MM = Multimode TABLE II: TERMINUS ACCESSORIES Part Number Accessory 182-018 Polishing Tool, PC* 182-012 Crimp Tool 182-019 Insertion Tool, Straight 182-011-18 Removal Tool * Consult Factory for APC Polishing Tool . © 2006 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] C-5 www.glenair.com