GLENAIR TG70

Series 72
Guardian
TG70
Connector Strap Wrench
with 3/8" Square Drive
Connector strap wrench
How To Order
Basic
Number
Torque Wrench
(Omit for None)
6.5 (165.1)
approx.
6.500
(165.1)
Approx
TG70 - p - 18
GLENAI R I NC. TG70
Strap Length in inches
Available in 12 and
18 inches. Omit for
standard 12 inches
3/8 (9.5) Square Drive for
3/8
Square
Drive, GTSQ150
Torque
Wrench
For Torque Wrench 600-004
3.0 (76.2) Diameter Max. with 18 inch strap
3.000
(76.2)
Dia. Max.
2.0
(50.8)
Diameter
Max. with 12 inch strap
Variance Chart Notes:
Variance Chart
TG70 Strap Wrench used with Glenair Torque Wrenches
Accessory
Shell Size
08/09
10/11
12/13
14/15
16/17
18/19
20/21
22/23
24/25
28
32
36
Recommended Installation Torque
Light/Medium Duty
Heavy Duty
±5 inch pounds
±5 inch pounds
TG70 Torque Part Torque TG70 Torque Part Torque
28
28
30
30
30
30
75
75
75
3.000 (76.2) Dia. Max. with 18 Inch Single S
2.000 Dia. (50.8) Max. with 12 Inch Single S
35
35
40
40
40
40
80
80
80
45
60
70
80
75
110 [80]
75
120 [80]
75
120 [80]
75
120 [80]
95
140 [100]
120*
140
120*
140
135*
150
150*
150
150*
150
*TG70 not recommended for values of 120 inch lbs. or greater.
Recommended installation torque is approximately 80% of
MIL-C-85049 accessory thread strength values.
Heavy duty installation torque values may be difficult to
attain with the TG70 Strap Wrench; the values shown in
brackets [ ] are the maximum attainable with the TG70 Strap
Wrench.
Glenair recommends using 600 series torque tools whenever
possible when torque loading exceeds 75 inch pounds, or to
attain the heavy duty torque values shown.
Material and Finish:
Wrench Handle: Alunminum Alloy/Nickel Plate
Wedge: Stainless Steel/Passivated
Strap: Impregnated Fabric
Notes:
Replacement Straps are available. Specify part number G70515-XX for 12 or 18 inch strap.
Not recommended for composite coupling nuts. Use 600-091 or 600-157.
Double wrap for heavy duty range
©2011 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
40