447 447-425 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Rotatable Coupling - Full Radius Profile 447 F N 425 NF 16 12 K P CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING Product Series Polysulfide (Omit for none) Connector Designator B = Band K = Precoiled Band (Omit for none) Angle and Profile M = 45 N = 90 See 447-6 for straight Cable Entry (Table IV) Shell Size (Table I) Basic Part No. Finish (Table II) A Thread (Table I) G (Table III) E (Table III) F (Table III) C Typ. (Table I) .500 (12.7) Max Termination Area Free of Cadmium Knurl or Ridges Mfr's Option H (Table III) K ** Cable Range L ** ** (Table IV) Polysulfide Stripes P Option .88 (22.4) Max Band Option (K Option Shown See Note 3) STYLE 2 (See Note 1) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 447 - Page 8 447 447-425 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Rotatable Coupling - Full Radius Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 Dash No. 10 12 14 16 18 20 22 24 28 32 E Max .817 (20.8) .861 (21.9) .911 (23.1) .965 (24.5) 1.014 (25.8) 1.064 (27.0) 1.118 (28.4) 1.172 (29.8) 1.221 (31.0) K ±.030 .220 .310 .440 .560 .630 .750 .880 1.000 1.060 1.190 F Max 1.057 (26.8) 1.111 (28.2) 1.161 (29.5) 1.215 (30.9) 1.264 (32.1) 1.314 (33.4) 1.368 (34.7) 1.422 (36.1) 1.471 (37.4) G Max 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) H Max 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) 2.250 (57.2) 2.375 (60.3) TABLE IV: CABLE RANGE Cable Range L Max Min ±(.8) Max .130 (3.3) .250 (6.4) (5.6) 1.000 (25.4) .250 (6.4) .380 (9.7) (7.9) 1.250 (31.8) .310 (7.9) .440 (11.2) (11.2) 1.340 (34.0) .375 (9.5) .630 (16.0) (14.2) 1.470 (37.3) .560 (14.2) .690 (17.5) (16.0) 1.560 (39.6) .630 (16.0) .750 (19.1) (19.1) 1.620 (41.1) .750 (19.1) .880 (22.4) (22.4) 1.750 (44.5) .880 (22.4) 1.000 (25.4) (25.4) 1.870 (47.5) (26.9) 1.970 (50.0) 1.000 (25.4) 1.130 (28.7) (30.2) 2.090 (53.1) 1.130 (28.7) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 447 - Page 9