GLENAIR 440FD074NF16

440
440-074
EMI/RFI Banding Adapter
Direct Coupling - Split Shell
440 F D 074 NF 16 12 K P
CONNECTOR
DESIGNATORS
*
A-B -C-D-E-F
G-H-J-K-L-S
* Conn. Desig. B See Note 2
DIRECT COUPLING
Product Series
Polysulfide (Omit for none)
Connector
Designator
B = Band
K = Precoiled Band
(Omit for none)
Angle and Profile
D = Split 90
F = Split 45
Cable Entry (Table V)
Shell Size (Table I)
Basic Part No.
Finish (Table II)
A Thread
(Table I)
J
E
(Table III) (Table IVI)
J
G
(Table III)
(Table IV)
F (Table IV)
B Typ.
(Table I)
H (Table IV)
Split 45°
Termination Area
Free of Cadmium.
Knurl or Ridges
Mfr's Option
.380 (9.7)
Typ.
K*
L*
* (Table V)
.060
(1.5)
Typ.
Split 90°
Polysulfide Stripes
P Option
Band Option
(K Option Shown See Note 3)
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
Series 440 - Page 52
www.glenair.com
440
440-074
EMI/RFI Banding Adapter
Direct Coupling - Split Shell
See inside back cover fold-out or pages 13 and 14 for Tables I and II.
Shell
Size
08/09
10/11
12/13
14/15
16/17
18/19
20/21
22/23
24/25
28/29
32/33
36
40
TABLE III: FRONT ADAPTER
J Max - Conn. Designator
A-E-F
D-B-G-K
J-H-L-S
C
1.180 (30.0) 1.250 (31.8)
1.180 (30.0) 1.250 (31.8)
1.180 (30.0) 1.250 (31.8) 1.735 (44.1)
1.180 (30.0) 1.250 (31.8) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
1.610 (40.9) 1.560 (39.6) 1.915 (48.6)
1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
1.610 (40.9) 2.190 (55.6) 1.915 (48.6)
TABLE V: CABLE ENTRY
K
L
Dash
Dia
Dia
No.
.125 (3.2)
.250 (6.4)
02
.188 (4.8)
.312 (7.9)
03
.250 (6.4)
.375 (9.5)
04
.312
(7.9)
.438 (11.1)
05
.375 (9.5)
.500 (12.7)
06
.438 (11.1)
.562 (14.3)
07
.500 (12.7)
.625 (15.9)
08
.562 (14.3)
.688 (17.5)
09
.625 (15.9)
.750 (19.1)
10
.688 (17.5)
.812 (20.6)
11
.750
(19.1)
.875 (22.2)
12
.812 (20.6)
.938 (23.8)
13
.875 (22.2) 1.000 (25.4)
14
.938 (23.8) 1.062 (27.0)
15
16 1.000 (25.4) 1.125 (28.6)
17 1.062 (27.0) 1.188 (30.2)
18 1.125 (28.6) 1.250 (31.8)
20 1.250 (31.8) 1.375 (34.9)
22 1.375 (34.9) 1.500 (38.1)
24 1.500 (38.1) 1.625 (41.3)
© 2005 Glenair, Inc.
TABLE IV: ELBOW DIMENSIONS
G
Elbow
E
F
Max
Size
Max
Max
02 .440 (11.2) 1.590 (40.4) .680 (17.3)
03 .440 (11.2) 1.590 (40.4) .680 (17.3)
04 .440 (11.2) 1.590 (40.4) .680 (17.3)
05 .500 (12.7) 1.650 (41.9) .750 (19.1)
06 .500 (12.7) 1.650 (41.9) .750 (19.1)
07 .560 (14.2) 1.720 (43.7) .810 (20.6)
08 .560 (14.2) 1.720 (43.7) .810 (20.6)
09 .620 (15.7) 1.750 (44.5) .870 (22.1)
10 .680 (17.3) 1.850 (47.0) .930 (23.6)
11 .680 (17.3) 1.850 (47.0) .930 (23.6)
12 .750 (19.1) 1.910 (48.5) 1.000 (25.4)
13 .820 (20.8) 1.970 (50.0) 1.060 (26.9)
14 .820 (20.8) 1.970 (50.0) 1.060 (26.9)
15 .880 (22.4) 2.030 (51.6) 1.120 (28.4)
16 .880 (22.4) 2.030 (51.6) 1.120 (28.4)
H
Max
1.530 (38.9)
1.530 (38.9)
1.530 (38.9)
1.590 (40.4)
1.590 (40.4)
1.660 (42.2)
1.660 (42.2)
1.690 (42.9)
1.790 (45.5)
1.790 (45.5)
1.850 (47.0)
1.910 (48.5)
1.910 (48.5)
1.970 (50.0)
1.970 (50.0)
1. Metric dimensions (mm) are indicated in parentheses.
2. When using Connector Designator B
refer to pages 18 and 19 for part
number development.
3. Backshells supplied with 600-052-*
band, see Glenair Series 600 Tool
Catalog for installation.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
Series 440 - Page 53
www.glenair.com