FLLE2 … PV DC EMI Filters for PV Inverters Overview This filter series is intended to be used in Photo Voltaic applications between the solar panels and the inverter system. The filters are optimized in geometry and for power loss. They are also adapted to attenuate high frequency noise that may be degrading life time of the solar panels and will as well reduce the radiation of EMI noise that may emerge from the panels. Filters without Y-capacitors to protective earth are available on request. As the Capacitance Company, KEMET is only using high quality capacitors in its filter series. Technical specifications Rated voltage Rated current Rated temperature Temperature range Climate category Voltage test 1200 VDC 25 – 1600 A 55°C -40°C to +100°C 40/100/21 P -> P 3000 VDC P -> E 3600 VDC Power loss @ 25°C/DC (W) Weight (kg) FLLE2025APVR1 25 8 1 FLLE2050APVR1 50 12 2 FLLE2075APVR1 75 16 2 FLLE2100APVR1 100 20 3 FLLE2150APVR1 150 30 4 FLLE2250APVI1 250 10 5 FLLE2400APVI1 400 15 7 FLLE2600APVI1 600 25 7 FLLE2800APVI1 800 30 10 FLLE21K0APVI1 1000 45 10 FLLE21K6APVI1 1600 70 16 + + _ _ PE PE INVERTER Rated current @ 55°C (A) Filter PV ARRAY The FLLE2…PV-series is designed according to IEC/EN 60939 and UL 1283. Typical insertion loss dB 100 Sym Asym dB 100 Sym Asym dB 100 80 80 80 60 60 60 40 40 40 20 20 20 0 0.01 0.1 1 25 to 75 A 10 100 MHz 0 0.01 0.1 1 10 100 and 150 A 100 MHz 0 0.01 Sym 0.1 Asym 1 10 100 MHz 250 to 1600 A KEMET EMC Filters 1 FLLE2 … PV DC EMI Filters for PV Inverters Mechanical dimensions Z FLLE2 … PVI1 Busbar connections L Z W Z FLLE2 … PVR1 Terminal blocks L Z W M U H Y H X R3 (x4) W1 W2 L1 L2 W1 W2 Ø12 (x6) ØN L1 Terminal blocks – wire dimensions 25A 16/10mm² solid/flexible 50A 35/25 75A 35/25 100A 50/50 150A 95/95 ØN K I J I 250 to 1000A Filter 1600 A Dimensions in mm L W H L1 FLLE2025APVR1 140 80 65 FLLE2050APVR1 170 95 FLLE2075APVR1 170 95 FLLE2100APVR1 190 FLLE2150APVR1 FLLE2250APVI1 L2 W1 W2 U X Y Z I J K N 170 45 60 25 M5 80 200 60 75 39 M6 80 200 60 75 39 M6 125 95 220 80 100 45 M8 220 140 115 250 100 120 300 130 110 130 110 155 180 70 5 25 58 15 9 M10 FLLE2400APVI1 300 140 110 130 110 165 190 70 6 25 58 15 10.5 M10 FLLE2600APVI1 300 140 110 130 110 165 190 70 8 40 58 15 10.5 M10 FLLE2800APVI1 300 150 140 130 110 175 200 70 8 40 65 20 14 M12 FLLE21K0APVI1 300 150 140 130 110 175 200 70 8 40 65 20 14 M12 FLLE21K6APVI1 300 150 150 130 110 175 200 70 10 60 100 17 14 M12 50 M M10 43 26 Legal disclaimer notice All product specifications, statements, information and data (collectively, the “information”) are subject to change without notice. the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. All information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that failure of an electrical component does not result in a risk of personal injury or property damage. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their applications. Any technical advice inferred from this information or otherwise provided by us with reference to Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required KEMET EMC Filters 2