37 370-004 Water-Tight Cable Sealing Backshell with Strain Relief Low Profile - Direct Coupling CONNECTOR DESIGNATORS * 370 F S 004 M 16 10 C 6 Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-B -C-D-E-F G-H-J-K-L-S Connector Designator Strain Relief Style (B, C, E) Angle and Profile A = 90° B = 45° S = Straight * Conn. Desig. B See Note 6 DIRECT COUPLING Cable Entry (Tables V, VI) Shell Size (Table I) Finish (Table II) Basic Part No. Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) A Thread (Table I) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 5) O-Ring B (Table I) STYLE 2 (STRAIGHT See Note 1) J G J (Table III) (Table IV) E (Table III) (Table IV) F (Table IV) B (Table I) B (Table I) H (Table IV) STYLE B (Table V) STYLE C Medium Duty (Table V) M Clamping Bars K Cable Range L © 2005 Glenair, Inc. Cable Range L CAGE Code 06324 STYLE E Medium Duty (Table VI) N (See Note 3) P Cable R Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 37 - Page 18 www.glenair.com 37 370-004 Water-Tight Cable Sealing Backshell with Strain Relief Low Profile - Direct Coupling TABLE III: FRONT ADAPTER J Max - Conn. Designator Shell A-E-F Size J-H-L-S D-B-G-K C 08/09 1.180 (30.0) 1.250 (31.8) 10/11 1.180 (30.0) 1.250 (31.8) 12/13 1.180 (30.0) 1.250 (31.8) 1.735(44.1) 14/15 1.180 (30.0) 1.250 (31.8) 1.915(48.6) 16/17 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 18/19 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 20/21 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 22/23 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 24/25 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 28/29 1 1.560 (39.6) 1.915(48.6) 32/33.610 (40.9) 1.750 (44.5) 1.915(48.6) 36 1.610 (40.9) 1.750 (44.5) 1.915(48.6) 40 1.610 (40.9) 2.190 (55.6) 1.915(48.6) Dash No. 03 04 06 08 10 12 16 20 24 28 32 Dash No. 03 04 06 08 10 12 16 20 24 28 32 K Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) P Max .739 (18.8) .739 (18.8) .739 (18.8) .739 (18.8) .791 (20.1) .880 (22.4) .901 (22.9) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) © 2005 Glenair, Inc. See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 04 .567 (14.4) 1.187 (30.1) .636 (16.2) 06 .630 (16.0) 1.250 (31.8) .710 (18.0) 08 .692 (17.6) 1.312 (33.3) .731 (18.6) 10 .755 (19.2) 1.655 (42.0) .825 (21.0) 12 .848 (21.5) 1.765 (44.8) .988 (25.1) 16 1.036 (26.3) 1.952 (49.6) 1.087 (27.6) 20 1.130 (28.7) 2.098 (53.3) 1.325 (33.7) 24 1.255 (31.9) 2.155 (54.7) 1.337 (34.0) 28 1.317 (33.5) 2.250 (57.2) 1.827 (46.4) 32 1.348 (34.2) 2.343 (59.5) 2.027 (51.5) TABLE V: CABLE ENTRY Cable Range L N Max Ref Min Max .812 (20.6) .135 (3.4) .156 (4.0) .219 (5.6) .937 (23.8) .203 (5.2) .188 (4.8) .312 (7.9) 1.062 (27.0) .285 (7.2) .281 (7.1) .438 (11.1) 1.188 (30.2) .350 (8.9) .312 (7.9) .531 (13.5) 1.312 (33.3) .390 (9.9) .375 (9.5) .625 (15.9) 1.562 (39.7) .460 (11.7) .500 (12.7) .750 (19.1) 1.750 (44.5) .510 (13.0) .625 (15.9) .938 (23.8) 2.250 (57.2) .695 (17.7) .938 (23.8) 1.250 (31.8) 2.375 (60.3) .715 (18.2) 1.000 (25.4) 1.375 (34.9) 2.625 (66.7) .915 (23.2) 1.250 (31.8) 1.625 (41.3) 2.812 (71.4) 1.070 (27.2) 1.500 (38.1) 1.875 (47.6) TABLE VI: CABLE ENTRY Cable Range R Max Min Max .812 (20.6) .156 (4.0) .219 (5.6) .937 (23.8) .188 (4.8) .312 (7.9) 1.062 (27.0) .281 (7.1) .438 (11.1) 1.188 (30.2) .312 (7.9) .531 (13.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 1.562 (39.7) .500 (12.7) .750 (19.1) 1.750 (44.5) .625 (15.9) .938 (23.8) 2.250 (57.2) .938 (23.8) 1.250 (31.8) 2.375 (60.3) 1.000 (25.4) 1.375 (34.9) 2.625 (66.7) 1.250 (31.8) 1.625 (41.3) 2.812 (71.4) 1.500 (38.1) 1.875 (47.6) CAGE Code 06324 H Max 1.200 (30.5) 1.320 (33.5) 1.340 (34.0) 1.660 (42.2) 1.750 (44.5) 1.925 (48.9) 2.033 (51.6) 2.200 (55.9) 2.450 (62.2) 2.450 (62.2) M Max 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.094 (27.8) 1.219 (31.0) 1.219 (31.0) 1.344 (34.1) 1.547 (39.3) 1.547 (39.3) 1.734 (44.0) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. Function S only. 2. Metric dimensions (mm) are indicated in parentheses. 3. Saddles are bottomed on Clamp Ears. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 37 - Page 19 www.glenair.com