39 390-057 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type E - Direct Coupling - Low Profile CONNECTOR DESIGNATORS * 390 F S 057 M 16 10 D M 6 Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-B -C-D-E-F G-H-J-K-L-S Connector Designator * Conn. Desig. B See Note 5 DIRECT COUPLING Angle and Profile A = 90 B = 45 S = Straight Strain Relief Style (H, A, M, D) Basic Part No. Cable Entry (Tables X, XI) TYPE E INDIVIDUAL AND/OR OVERALL Finish (Table II) SHIELD TERMINATION Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) A Thread (Table I) Termination (Note 3) D = 2 Rings, T = 3 Rings Shell Size (Table I) Length * O-Rings 1.281 (32.5) Ref. Typ. B (Table I) J J E (Table III) (Table IV) STYLE 2 (STRAIGHT See Note 1) * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) G (Table III) (Table IV) F (Table IV) B (Table I) B (Table I) H (Table IV) STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range STYLE M Medium Duty (Table XI) X Y CAGE Code 06324 Cable Range STYLE D Medium Duty (Table XI) .135 (3.4) Max Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 52 39 390-057 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type E - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS Elbow E G F Size Max Max Max 03 .630 (16.0) 2.117 (53.8) .636 (16.2) 04 .630 (16.0) 2.117 (35.8) .636 (16.2) 06 .630 (16.0) 2.117 (35.8) .710 (18.0) 08 .692 (17.6) 2.179 (55.3) .731 (18.6) 10 .755 (19.2) 2.862 (72.7) .825 (21.0) 12 .848 (21.5) 2.972 (75.5) .988 (25.1) 16 1.036 (26.3) 3.159 (80.2) 1.087 (27.6) 20 1.130 (28.7) 3.368 (85.5) 1.325 (33.7) 24 1.255 (31.9) 3.408 (86.6) 1.337 (34.0) 28 1.317 (33.5) 3.553 (90.2) 1.827 (46.4) 32 1.348 (34.2) 3.646 (92.6) 2.027 (51.5) TABLE X: CABLE ENTRY Cable Range V T Max Min Max Max .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .387 (9.8) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .500 (12.7) .750 (19.1) .811 (20.6) 1.551 (39.4) .625 (15.9) .937 (23.8) .905 (23.0) 1.770 (45.0) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) Dash X W No. Max Max 03* .437 (11.1) .760 (19.3) 04* .437 (11.1) .760 (19.3) 06* .500 (12.7) .760 (19.3) 08 .563 (14.3) .760 (19.3) 10 .563 (14.3) .760 (19.3) 12 .563 (14.3) .760 (19.3) 16 .656 (16.7) 1.073 (27.3) 20 .656 (16.7) 1.323 (33.6) 24 .656 (16.7) 1.323 (33.6) 28 1.188 (30.2) 1.572 (39.9) 32* 1.187 (30.1) 1.572 (39.9) 40* 1.125 (28.6) 1.572 (39.9) * Not available in Style M clamp. © 2005 Glenair, Inc. TABLE XI: CABLE ENTRY Y Z Max Max .843 (21.4) .630 (16.0) .906 (23.0) .755 (19.2) 1.093 (27.8) .942 (23.9) 1.187 (30.1) 1.067 (27.1) 1.281 (32.5) 1.192 (30.3) 1.500 (38.1) 1.380 (35.1) 1.719 (43.7) 1.535 (39.0) 2.062 (52.4) 1.848 (46.9) 2.312 (58.7) 2.255 (57.3) 2.719 (69.1) 2.505 (63.6) 2.969 (75.4) 2.755 (70.0) 3.531 (89.7) 3.255 (82.7) CAGE Code 06324 H Max 2.067 (52.5) 2.067 (52.5) 2.187 (55.5) 2.207 (39.1) 2.867 (39.6) 2.957 (41.4) 3.132 (48.0) 3.303 (50.8) 3.453 (50.8) 3.703 (55.1) 3.753 (61.5) 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. Designate Symbol T for 3 ring termination of individual and overall braid. Designate D for standard 2 ring termination of individual or overall braid. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. Cable Range Min ** Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.8) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) ** Not Applicable Style D Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 53