This document is a declaration of the substances within the manufacturer listed item. Note: if the item is an assembly with lower level parts, the declaration encompasses all lower level materials for which the manufacturer has © Copyright 2005. IPC, Bannockburn, Illinois. All rights reserved under engineering responsibility. both international and Pan-American copyright conventions. Adobe Reader version 7.0.5 is required to complete this declaration. Material Composition Declaration 1752-2 IPC Web Site for Information on IPC-1752 Standard http://www.ipc.org/IPC-175x 1.1 Form Type * Distribute Declaration Class * Class 6 - RoHS Yes/No, Homogeneous Materials and Mfg Informat Supplier Information Company Name * Company Unique ID Unique ID Authority Response Date * Cypress Semiconductor CorpCypress Contact Name * Title - Contact Phone - Contact * 2009-08-25 Email - Contact * Richard Oshiro Quality Systems Director Authorized Representative * Title - Representative 408 943 2102 Phone - Representative * [email protected] Email - Representative * Glorioso Lutrinia Requester Item Number EH & S Manager 632 812 8161 [email protected] Mfr Item Number Mfr Item Name Effective Date VFBGA 100 VFBGA 100 2009-08-25 Alternate Recommendation Version Response Document ID Duplicate Contact -> Authorized Representative Supplier Comments or URL for Additional Information Manufacturing Site Weight * UOM AIT Indonesia 70 mg Package QTP No. 071202 Alternate Item Comments Unit Type Each Manufacturing Process Information Terminal Plating / Grid Array Material Tin/Silver/Copper (Sn/Ag/Cu) Terminal Base Alloy CU Alloy J-STD-020 MSL Rating 3 Peak Process Body Temperature Max Time at Peak Temperature Number of Reflow Cycles 260 C 20 seconds 3 Comments Compliant to RoHS and Halogen Requirements, 6x6x1.0 mm, BZ100 * Required Field CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe Save the fields in this form to a file Export Data Import fields from a file into this form Import Data Clear all of the fields on this form Reset Form Lock the fields on this form to prevent changes RoHS Material Composition Declaration Declaration Type * Lock Supplier Fields Detailed RoHS Directive RoHS Definition: Quantity limit of 0.1% by mass (1000 PPM) in homogeneous material for: Lead (Pb), Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB), 2002/95/EC Polybrominated Diphenyl Ethers (PBDE) and quantity limit of 0.01% by mass (100 PPM) of homogeneous material for Cadmium Please indicate whether any homogeneous material (as defined by the RoHS Directive, EU 2002/95/EC and implemented by the laws of the European Union member states) of the part identified on this form contains lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and/or polybrominated diphenyl ethers (each a “RoHS restricted substance”) in excess of the applicable quantity limit identified above. If a homogeneous material within the part contains a RoHS restricted substance in excess of an applicable quantity limit, please indicate below which, if any, RoHS exemption you believe may apply. If the part is an assembly with lower level components, the declaration shall encompass all such components. Supplier certifies that it gathered the information it provides in this form using appropriate methods to ensure its accuracy and that such information is true and correct to the best of its knowledge and belief, as of the date that Supplier completes this form. Supplier acknowledges that Company will rely on this certification in determining the compliance of its products with European Union member state laws that implement the RoHS Directive. Company acknowledges that Supplier may have relied on information provided by others in completing this form, and that Supplier may not have independently verified such information. However, in situations where Supplier has not independently verified information provided by others, Supplier agrees that, at a minimum, its suppliers have provided certifications regarding their contributions to the part, and those certifications are at least as comprehensive as the certification in this paragraph. If the Company and the Supplier enter into a written agreement with respect to the identified part,the terms and conditions of that agreement, including any warranty rights and/or remedies provided as part of that agreement, will be the sole and exclusive source of the Supplier’s liability and the Company’s remedies for issues that arise regarding information the Supplier provides in this form. In the absence of such written agreement, the warranty rights and/or remedies of Supplier's Standard Terms and Conditions of Sale applicable to such part shall apply. Supplier Acceptance * Accepted RoHS Declaration * 1 - Item(s) does not contain RoHS restricted substances per the definition above Exemptions: If the declared item does not contain RoHS restricted substances per the definition above except for defined RoHS exemptions, then select the corresponding response in the RoHS Declaration above and choose all applicable exemptions. Declaration Signature Instructions: Complete all of the required fields on all pages of this form. Select the "Accepted" on the Supplier Acceptance drop-down. This will display the signature area. Digitally sign the declaration (if required by the Requester) and click on Submit Form to have the form returned to the Requester. Supplier Digital Signature Glorioso Lutrinia * Required Field Digitally signed by Glorioso Lutrinia DN: cn=Glorioso Lutrinia, o=Cypress Semiconductor Corporation, ou, [email protected], c=PH Date: 2009.09.24 18:10:24 +08'00' CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe Homogeneous Material Composition Declaration for Electronic Products SubItem Instructions: The presence of any JIG Level A or B substances must be declared. [1] indicate the subpart in which the substance is located, [2] provide a description of the homogeneous material [3], enter the weight of the homogeneous material. Substance Instructions: [A] select the Level (JIG A, JIG B, Requester or Supplier) [B] select the substance category (JIG or Requester) or enter a value (Supplier). [C] select the substance (JIG) or enter the substance and CAS (Other). [D] select a RoHS exemption, if applicable [E] enter the weight of the substance or the PPM concentration [F] Optionally enter the positive (+) and negative (-) tolerance in percent (Note: percent tolerance values are expected to cover a 3 sigma range of distribution unless otherwise noted). Line Functions: +I Inserts a New Item /SubItem +M Inserts a new Material Item/SubItem Name +I -I Substrate +I -I Solder Ball +I -I Die Attach Homogeneous Material +M -M Base Material Weight Unit of Measure 2.8 mg +M -M External Plating 41.45 +M -M Adhesive * Required Field 6.51 mg mg Level +C Inserts a new Substance Category Substance Category +S Inserts a new Substance Substance CAS - Deletes the element line Exempt Weight Unit of Tolerance PPM Measure + +C -C Supplier Au, metal & alloy +S -S Au, metal & alloy 7440-57-5 0.0207 mg 296 +C -C Supplier Ni, metal & alloy +S -S Ni, metal & alloy 65997-17-3 0.0952 mg 1,359 +C -C Supplier Cu, metal & alloy +S -S Cu, metal & alloy 7440-50-8 0.7154 mg 10,216 +C -C Supplier Acrylic Resin +S -S Acrylic Resin Trade Secre 0.0216 mg 308 +C -C Supplier Phthalcyanine Blue, O+S -S Phthalcyanine Blue, Org Trade Secre 0.0003 mg 4 +C -C Supplier Fillers (Barium Sulfat +S -S Fillers (Barium Sulfate, Trade Secre 0.0165 mg 236 +C -C Supplier Aromatic Carbonyl C +S -S Aromatic Carbonyl Com Trade Secre 0.0022 mg 32 +C -C Supplier Amine Compound Trade Secre 0.0036 mg 52 +C -C Supplier Levelling Agents & O +S -S Levelling Agents & Oth Trade Secre 0.0008 mg 12 +C -C Supplier Acrylic Monomer +S -S Acrylic Monomer Trade Secre 0.0028 mg 40 +C -C Supplier Epoxy Resin +S -S Epoxy Resin 29690-82-2; 0.0092 mg 132 +C -C Supplier Barium Sulfate +S -S Barium Sulfate Trade Secre 0.0039 mg 56 +C -C Supplier Organic Fillers +S -S Organic Fillers Trade Secre 0.0008 mg 12 +C -C Supplier BT Resin +S -S BT Resin 13676-54-5; 0.84 mg 11,995 +C -C Supplier Fibrous-glass-wool +S -S Fibrous-glass-wool 65997-17-3 1.0668 mg 15,233 +C -C Supplier Tin +S -S Tin 7440-31-5 40.8283 mg 583,01 +C -C Supplier Silver +S -S Silver 7440-22-4 0.4145 mg 5,919 +C -C Supplier Copper +S -S Copper 7440-50-8 0.2073 mg 2,959 +C -C Supplier Ag +S -S Ag 7440-22-4 4.557 mg 65,072 +C -C Supplier Epoxy Resin +S -S Epoxy Resin Trade Secre 0.3255 mg 4,648 +C -C Supplier Diester +S -S Diester Trade Secre 0.651 mg 9,296 +C -C Supplier Polymeric Resin +S -S Polymeric Resin Trade Secre 0.3255 mg 4,648 +C -C Supplier Functionalized Ester +S -S Functionalized Ester Trade Secre 0.651 mg 9,296 +S -S Amine Compound CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe +I -I Die +M -M Circuit 4 mg +C -C Supplier Silicon +S -S Silicon 7440-21-3 4 mg 57,118 +I -I Wire +M -M Interconnect 1.75 mg +C -C Supplier Gold +S -S Gold 7440-57-5 1.75 mg 24,989 +I -I Mold Compound +M -M Encapsulation 13.52 mg +C -C Supplier Fused Silica +S -S Fused Silica 60676-86-0 12.844 mg 183,40 +C -C Supplier Epoxy Resin +S -S Epoxy Resin Trade Secre 0.2704 mg 3,861 +C -C Supplier Phenol Resin +S -S Phenol Resin Trade Secre 0.0676 mg 965 +C -C Supplier Phenol Novolac +S -S Phenol Novolac 9003-35-4 0.1352 mg 1,931 +C -C Supplier Metal Hydroxide +S -S Metal Hydroxide Trade Secre 0.1352 mg 1,931 +C -C Supplier Carbon Black +S -S Carbon Black 1333-86-4 0.0676 mg 965 * Required Field CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe