34 340-001 O-Ring Sealed Shorting Cap Backshell Rotatable Coupling 340 F S 001 M 16-5 H 6 A CONNECTOR DESIGNATORS Product Series End Fitting Symbol (Table IV) A-F-G H-J-L-S Connector Designator Attachment Length (1/2 inch increments: e.g. 6 = 3 inches) ROTATABLE COUPLING Basic Part No. Angle and Profile S = Straight Attachment Symbol (Table III) Length (1/2 inch increments: e.g. 5 = 2.5 inches, 1.0 inch Minimum Order Length Finish (Table II) Shell Size (Table I) O-Ring Length ± .060 (1.52) A Thread (Table I) Now Available with the “NESTOR” Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. C (Table I) .50 (12.7) Max Attachment Length ± .25 (6.4) Symbol C D E F G H N R S U E Dia (Table IV) TABLE III: ATTACHMENT OPTIONS Attachment No attachment, body strap only Bead chain, cres, passivate, with terminal Link chain, cres, passivate, with reverse link Wire rope, nylon jacket, with terminal Nylon rope, with terminal Wire rope, teflon jacket, with terminal Attachment omitted Wire rope, PVC jacket, with terminal #8 Sash chain, cres, passivate Wire rope, polyurethane jacket, with terminal 1. Metric dimensions (mm) are indicated in parentheses. 2. O-Ring not supplied with Connector Designators A and G. 3. Custom engraving available, consult factory. © 2005 Glenair, Inc. CAGE Code 06324 TABLE IV: END FITTING Symbol E Dia. A .140 (3.6) B .167 (4.2) C .182 (4.6) D .191 (4.9) E .125 (3.2) F .218 (5.5) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 34 - Page 2