38 380-019 EMI/RFI Non-Environmental Backshell with Strain Relief Type E - Direct Coupling - Split Shell CONNECTOR DESIGNATORS * 380 F D 019 M 24 12 D A A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 6 DIRECT COUPLING TYPE E INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION A Thread (Table I) J Strain Relief Style (H, A, M, D) Product Series Connector Designator Termination (Note 5) D = 2 Rings T = 3 Rings Angle and Profile C = Ultra-Low Split 90° (See Note 3) D = Split 90° F = Split 45° (Note 4) Cable Entry (Tables X, XI) Shell Size (Table I) Basic Part No. Finish (Table II) J G (Table III) (Table IV) J L (Table III) (Table V) E K (Table V) (Table III) (Table IV) F (Table IV) B Typ. (Table I) Split 90° Split 45° STYLE H Heavy Duty (Table X) Cable Range V Cable Range Max Wire Bundle (Table V, Note 1) Ultra LowProfile Split 90° STYLE A Medium Duty (Table XI) W T H (Table IV) STYLE M Medium Duty (Table XI) X Y Cable Range Y M (Table V) STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Entry Z 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. Function C Low Profile Elbow is available in Dash Numbers 03 thru 12 only. 4. Consult factory for available sizes of 45° (Symbol F). 5. Designate Symbol T for 3 ring termination of individual and overall braid. Designate D for standard 2 ring termination of individual or overall braid. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 38 - Page 96 38 380-019 EMI/RFI Non-Environmental Backshell with Strain Relief Type E - Direct Coupling - Split Shell TABLE III: FRONT ADAPTER J Max - Conn. Designator Shell A-E-F Size J-H-L-S D-B-G-K C 08/09 1.180 (30.0) 1.250 (31.8) 10/11 1.180 (30.0) 1.250 (31.8) 12/13 1.180 (30.0) 1.250 (31.8) 1.735(44.1) 14/15 1.180 (30.0) 1.250 (31.8) 1.915(48.6) 16/17 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 18/19 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 20/21 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 22/23 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 24/25 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 28/29 1 1.560 (39.6) 1.915(48.6) 32/33.610 (40.9) 1.750 (44.5) 1.915(48.6) 36 1.610 (40.9) 1.750 (44.5) 1.915(48.6) 40 1.610 (40.9) 2.190 (55.6) 1.915(48.6) TABLE V: ELBOW DIMENSIONS Elbow K L Size Ref Max 03 .340 (8.6) .681 (17.3) 04 .270 (6.9) .731 (18.6) 06 .270 (6.9) .731 (18.6) 08 .280 (7.1) .831 (21.1) 10 .420 (10.7) .981 (24.9) 12 .540 (13.7) 1.181 (30.0) Elbow Size 03 04 06 08 10 12 Function C Max M Wire Bundle Max .250 (6.4) 1.730 (43.9) .375 (9.5) 1.730 (43.9) .375 (9.5) 1.890 (48.0) .500 (12.7) 1.890 (48.0) .625 (15.9) 1.960 (49.8) .750 (19.1) 1.960 (49.8) TABLE IV: ELBOW DIMENSIONS Elbow E F G H Size Max Max Max Max 03 .500 (12.7) 1.590 (40.4) .680 (17.3) 1.530 (38.9) 04 .500 (12.7) 1.590 (40.4) .680 (17.3) 1.530 (38.9) 06 .500 (12.7) 1.650 (41.9) .750 (19.1) 1.590 (40.4) 08 .560 (14.2) 1.720 (43.7) .810 (20.6) 1.660 (42.2) 10 .620 (15.7) 1.750 (44.5) .870 (22.1) 1.690 (42.9) 12 .680 (17.3) 1.850 (47.0) .930 (23.6) 1.790 (45.5) 16 .750 (19.1) 1.910 (48.5)1.000 (25.4) 1.850 (47.0) 20 .820 (20.8) 1.970 (50.0)1.060 (26.9) 1.910 (48.5) 24 .880 (22.4) 2.030 (51.6)1.120 (28.4) 1.970 (50.0) 28 .940 (23.9) 2.090 (53.1)1.180 (30.0) 2.030 (51.6) TABLE X: CABLE ENTRY Dash T V Cable Range No. Max Max Min Max 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) 08 .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE XI: CABLE ENTRYS Dash W X Y Z Cable Range No. Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 97 www.glenair.com