38 380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Split Shell 380 F D 009 M 16 05 F CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING Strain Relief Style (F, G) Connector Designator Cable Entry (Table IV, V) Shell Size (Table I) TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION A Thread (Table I) Product Series Angle and Profile C = Ultra-Low Split 90° D = Split 90° F = Split 45° Finish (Table II) Basic Part No. G (Table III) E (Table III) F (Table III) C Typ. (Table I) H (Table III) Split 90° Split 45° .88 (22.4) Max L* *(Table III) J* STYLE 2 (See Note 1) STYLE F Light Duty (Table IV) STYLE G Light Duty (Table V) .416 (10.5) Max Cable Range M .072 (1.8) Max Cable Entry Max Wire Bundle (Table III, Note 1) K (Table III) N Ultra Low-Profile Split 90° © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 56 www.glenair.com 38 380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options TABLE III: DIMENSIONS Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 Dash No. 02 03 04 05 06 07 08 10 E Max .440 (11.2) .500 (12.7) .560 (14.2) .620 (15.7) .680 (17.3) .750 (19.1) .820 (20.8) .880 (22.4) .940 (23.9) F Max 1.730 (43.9) 1.785 (45.3) 1.855 (47.1) 1.887 (47.9) 1.987 (50.5) 2.045 (51.9) 2.106 (53.5) 2.167 (55.0) 2.225 (56.5) G Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) H Ref 1.670 (42.4) 1.725 (43.8) 1.795 (45.6) 1.827 (46.4) 1.927 (48.9) 1.985 (50.4) 2.046 (52.0) 2.107 (53.5) 2.165 (55.0) J Max .340 (8.6) .270 (6.9) .270 (6.9) .320 (8.1) .420 (10.7) .640 (16.3) .640 (16.3) .540 (13.7) .540 (13.7) TABLE IV: CABLE ENTRY Cable Range M Max Min Max .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .312 (7.9) .500 (12.7) 1.218 (30.9) .437 (11.1) .625 (15.9) 1.343 (34.1) .562 (14.3) .750 (19.1) 1.468 (37.3) .687 (17.4) .875 (22.2) 1.593 (40.5) .812 (20.6) 1.000 (25.4) 1.843 (46.8) 1.062 (27.0) 1.250 (31.8) K Max 1.920 (48.8) 2.080 (52.8) 2.080 (52.8) 2.150 (54.6) 2.200 (55.9) 2.230 (56.6) 2.230 (56.6) 2.380 (60.5) 2.380 (60.5) Dash No. 01 02 03 04 05 06 07 08 09 10 Funtion C Max L Wire Bundle Max .250 (6.4) .681 (17.3) .375 (9.5) .731 (18.6) .375 (9.5) .731 (18.6) .500 (12.7) .831 (21.1) .625 (15.9) .981 (24.9) .625 (15.9) 1.181 (30.0) .625 (15.9) 1.181 (30.0) .750 (19.1) 1.181 (30.0) .750 (19.1) 1.181 (30.0) TABLE V: CABLE ENTRY N Cable Entry Max Max .656 (16.7) .125 (3.2) .781 (19.8) .250 (6.4) .906 (23.0) .375 (9.5) 1.031 (26.2) .500 (12.7) 1.156 (29.4) .625 (15.9) 1.281 (32.5) .750 (19.1) 1.406 (35.7) .875 (22.2) 1.531 (38.9) 1.000 (25.4) 1.656 (42.1) 1.125 (28.6) 1.781 (45.2) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded (not available in Symbol C), Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Angular function "C", low-profile split elbow, not available with "S" connector designator. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 57 www.glenair.com