39 390-059 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Self-Locking Rotatable Coupling - Standard Profile CONNECTOR DESIGNATORS 390 F S 059 M 16 05 L 6 Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-F-H-L-S Connector Designator SELF-LOCKING ROTATABLE COUPLING Strain Relief Style (L, G) Angle and Profile J = 90 H = 45 S = Straight TYPE C OVERALL SHIELD TERMINATION Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) Basic Part No. Length * Length ± .060 (1.52) Minimum Order Length 2.5 Inch (See Note 4) A Thread (Table I) .312 (7.9) Max O-Rings * Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) E Typ. (Table I) Anti-Rotation Device STYLE 2 (STRAIGHT See Note 1) H (Table III) F (Table III) 1.00 (25.4) Max G (Table III) J (Table III) STYLE 2 (45° & 90° See Note 1) STYLE L Light Duty (Table IV) STYLE G Light Duty (Table IV) .072 (1.8) Max .850 (21.6) Max Cable Range © 2005 Glenair, Inc. Cable Range K CAGE Code 06324 L Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 44 39 390-059 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Self-Locking Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 Dash No. 01 02 03 04 05 06 07 08 09 10 F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) 1.197 (30.4) 1.280 (32.5) 1.294 (32.9) K Max .781 (19.8) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) G Max 2.210 (56.1) 2.270 (57.7) 2.330 (59.2) 2.420 (61.5) 2.530 (64.3) 2.720 (69.1) 2.720 (69.1) 2.870 (72.9) 2.870 (72.9) 3.020 (76.7) 3.270 (83.1) 3.500 (88.9) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) 1.636 (41.6) 1.780 (45.2) 1.876 (47.7) TABLE IV: CABLE ENTRY Cable L Min Max .062 (1.6) .593 (15.1) .125 (3.2) .718 (18.2) .250 (6.4) .843 (21.4) .375 (9.5) .968 (24.6) .500 (12.7) 1.109 (28.2) .625 (15.9) 1.218 (30.9) .750 (19.1) 1.343 (34.1) .875 (22.2) 1.468 (37.3) 1.593 (40.5) 1.000 (25.4) 1.718 (43.6) 1.125 (28.6) J Max 2.080 (52.8) 2.120 (53.8) 2.090 (53.1) 2.090 (53.1) 2.130 (54.1) 2.250 (57.2) 2.180 (55.4) 2.240 (56.9) 2.170 (55.1) 2.320 (58.9) 2.570 (65.3) 2.800 (71.1) Range Max .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with Connector Designator A. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 45