443 443-011 -EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Self-Locking Rotatable Coupling - Standard Profile 443 F S 011 NF 16 12-8 H K P CONNECTOR DESIGNATORS A-F-H-L-S Product Series Polysulfide (Omit for none) Connector Designator B = Band K = Precoiled Band (Omit for none) Angle and Profile H = 45° J = 90° S = Straight SELF-LOCKING ROTATABLE COUPLING Strain Relief Style (H, A, M, D, Tables X &XI) Basic Part No. Finish (Table II) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Shell Size (Table I) Dash No. (Table IV) Length ± .060 (1.52) Min. Order Length 2.5 inch Length * A Thread (Table I) O-Rings 1.25 (31.8) Max E Typ. (Table I) K (Table IV) Anti-Rotation Device (Typ.) STYLE 2 (STRAIGHT See Note 1) 1.00 (25.4) Max * Length ± .060 (1.52) Min. Order Length 2.0 inch (Consult factory for shorter lengths) F H (Table III) (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. J (Table III) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 443 - Page 10 Rev. 20-AUG-2008 443 443-011 EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Self-Locking Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE IV: CABLE ENTRY K Dash Clamp Dia No. Size .125 (3.2) 02 03 .188 (4.8) 03 03 .250 (6.4) 04 03 .312 (7.9) 05 04 .375 (9.5) 06 06 .438 (11.1) 07 06 .500 (12.7) 08 08 .562 (14.3) 09 10 .625 (15.9) 10 10 .688 (17.5) 11 12 .750 (19.1) 12 12 .812 (20.6) 13 16 .875 (22.2) 14 16 .938 (23.8) 15 16 1.000 (25.4) 16 20 1.062 (27.0) 17 20 1.125 (28.6) 18 20 1.250 (31.8) 20 20 1.375 (34.9) 22 24 1.500 (38.1) 24 28 TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) G Max 1.380 (35.1) 1.410 (35.8) 1.430 (36.3) 1.460 (37.1) 1.480 (37.6) 1.490 (37.8) 1.510 (38.4) 1.550 (39.4) 1.580 (40.1) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) TABLE X: CABLE ENTRY T V Cable Clamp Max Size Max Min .780 (19.8) .957 (24.3) .125 (3.2) 04 .780 (19.8) 1.145 (29.1) 06 .250 (6.4) .780 (19.8) 1.332 (33.8) .387 (9.8) 08 .780 (19.8) 1.332 (33.8) 10 .350 (8.9) .811 (20.6) 1.551 (39.4) 12 .500 (12.7) .905 (23.0) 1.770 (45.0) .625 (15.9) 16 1.092 (27.7) 2.113 (53.7) 20 .875 (22.2) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 24 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 28 J Max 1.500 (38.1) 1.550 (39.4) 1.610 (40.9) 1.680 (42.7) 1.740 (44.2) 1.760 (44.7) 1.820 (46.2) 1.900 (48.3) 1.970 (50.0) Range Max .312 (7.9) .437 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .937 (23.8) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) TABLE XI: CABLE ENTRY Clamp Z Y X W Cable Range Size Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) * Not available in Style M clamp. ** Not Applicable Style D STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) STYLE M Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range CAGE Code 06324 STYLE D Medium Duty (Table XI) .135 (3.4) Max X Y 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. O-Ring not supplied with Connector Designator A. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Cable Range Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 443 - Page 11 Rev. 20-AUG-2008