Bulkhead Feed-Thrus 227-039 and 227-040 Bulkhead Feed-Through Connector Assemblies 227-039-10-2 P N P N 03 D Double O-Ring Option (Omit For None) Basic Part Number 227-039 = Standard Shell (mates with 220-06 plug) 227-040 = Scoop Proof Shell (mates with 220-16 plug) Bulkhead Thickness Dash No. (Table II) Side B Alternate Insert Position - N, 1, 2, 3 or 4 (See Page 6) Shell Size Side B Configuration: P = Pin, S = Socket Insert Arrangement Dash No. (See Page 7) (Note: For Pin/Pin or Socket/Socket, the Insert Arrangement Must Be Symmetrical.) Side A Alternate Insert Position - N, 1, 2, 3, or 4 (See Page 6) Side A Configuration: P = Pin, S = Socket, H = Hermetic Pin D Across Flats and Jam Nut Length Ref. Polarizing Key Typ. C Dia Side "A" B Thread Typ. E Dia Ref. Bulkhead Thickness (Table II) Side "B" O-Ring 32 A Thread Double O-Ring Option Color Band For Visual Identification of Full Mating (Typ. Both Sides) 30° E Dia Recommended Panel Cutout © 2003 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 18 Bulkhead Feed-Thrus 227-039 and 227-040 Bulkhead Feed-Through Connector Assemblies TABLE I Shell Size 10 12 14 16 18 20 22 24 A Thread Class 2A 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 16 UN 1 1/4 - 16 UN 1 3/8 - 16 UN 1 1/2 - 16 UN 1 5/8 - 16 UN 1 3/4 - 16 UN B Thread Class 2A .750 - .1P - .1L .875 - .1P - .1L 1.000 - .1P - .1L 1.125 - .1P - .1L 1.250 - .1P - .1L 1.375 - .1P - .1L 1.500 - .1P - .1L 1.625 - .1P - .1L C Dia 1.41 (35.8) 1.53 (38.9) 1.66 (42.2) 1.78 (45.2) 1.91 (48.5) 2.03 (51.6) 2.16 (54.9) 2.28 (57.9) D Flat 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) E Dia * .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) * Standard Shell +.010 (.3) -.000 (.0) * Scoop-Proof Shell +.002 (.3) -.000 (.0) TABLE II Dash No. 01 02 03 04 05 06 07 08 Panel Min .03 (.8) 1.00 (25.4) 2.00 (50.8) 3.00 (76.2) 4.00 (101.6) 5.00 (127.0) 6.00 (152.4) 7.00 (177.8) Panel Max 1.00 (25.4) 2.00 (50.8) 3.00 (76.2) 4.00 (101.6) 5.00 (127.0) 6.00 (152.4) 7.00 (177.8) 8.00 (203.2) Length (Ref.) Standard Scoop Proof Shell Shell 2.30 (58.4) 2.30 (58.4) 3.30 (83.8) 3.30 (83.8) 4.30 (109.2) 4.30 (109.2) 5.30 (134.6) 5.30 (134.6) 6.30 (160.0) 6.30 (160.0) 7.30 (185.4) 7.30 (185.4) 8.30 (210.8) 8.30 (210.8) 9.30 (236.2) 9.30 (236.2) 1. Metric dimensions (mm) are indicated in parentheses. 2. Power to a given contact on one end will result in power to contact directly opposite, regardless of identification letter. © 2003 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 19