ALUMINUM ELECTROLYTIC CAPACITORS BT High Temperature Range, For +125°C Use series Highly dependable reliability withstanding load life of 2000 to 10000 hours at +125°C. Suited for automobile electronics where heavy duty services are indispensable. Adapted to the RoHS directive (2002/95/EC). BW High Temperature BT Specifications Performance Characteristics Item Category Temperature Range – 40 ~ +125°C (10 ~ 250V), – 25 ~ +125°C (350 ~ 450V) Rated Voltage Range 10 ~ 450V Rated Capacitance Range 1 ~ 4700µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated Voltage (V) Leakage Current 160 ~ 450 10 ~ 100 < 1000 : I = 0.1CV+40 (µA) max. (1 minute's) CV = CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's) After 1 minute's application of rated voltage, leakage current Leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) tan δ (MAX.) tan δ 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 100 0.08 160 ~ 250 350 ~ 450 120Hz, 20°C 0.20 0.24 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 120Hz Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio Z– 40°C / Z+20°C ZT / Z20 (MAX.) Stability at Low Temperature 10 3 4 16 2 4 After an application of D.C. bias voltage plus the rated ripple current for less than 50V (φD = 8 : 2000 hours, > 12.5 : 10000 hours), φD = 10 : 5000 hours, φD = 63~100V (φD = 8 : 2000 hours, φD = 10 : 3000 hours, > 12.5 : 5000 hours), more than 160V (2000 hours) φD = at 125°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristics requirements listed at right. Endurance 25 2 4 35 2 4 50 2 4 63 2 4 80 2 4 100 2 4 160 ~ 250 350 ~ 450 3 6 6 – Capacitance change Within ± 30% of initial value (10 ~ 100V) Within ± 20% of initial value (160 ~ 450V) Dissipation Factor 300% or less of initial specified value (10 ~ 100V) 200% or less of initial specified value (160 ~ 450V) Leakage current Initial specified value or less After storing the capacitors under no load at 125˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Shelf Life Printed with white color letter on blue sleeve. Marking Type numbering system (Example : 10V 220µF) Radial Lead Type Sleeve (polyolefin) d 1 2 3 4 5 6 7 8 9 10 11 UB T 1 A 2 2 1 MPD f P ±0.5 D+ MAX. f Pressure relief vent L+2MAX. 4MIN (mm) 8 10 12.5 16 18 0.8 0.8 1.0 1.0 1.0 P 3.5 5.0 5.0 7.5 7.5 fd 0.6 0.6 0.6 0.8 0.8 In case L > 25 for the f12.5 dia. unit, lead dia. f d = 0.8mm. f D 15MIN Configuration Capacitance tolerance (±20%) Rated Capacitance (220mF) Rated voltage (10V) Series name Type Configuration Pb-free leadwire fD Pb-free Polyolefin sleeve 8 á 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS BT series Dimensions V (Code) Item Co Cap.. (µF) 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 de 10 (1A) Case size φD × L (mm) Item Co Cap.. (µF) 4.7 10 22 33 47 100 220 330 470 Impedance Rated ripple (Ω) MAX. (mArms) 010 2R2 3R3 4R7 100 220 330 470 101 221 8 × 11.5 10 × 12.5 331 10 × 12.5 471 10 × 20 102 222 12.5 × 25 16 × 25 332 16 × 31.5 472 V(Code) de 16 (1C) 0.26 0.15 0.10 0.057 0.033 0.024 0.020 Case size φD × L (mm) 63 (1J) Case size φD × L (mm) 0.32 0.15 0.10 0.075 0.042 0.024 0.020 0.018 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 31.5 18 × 31.5 340 620 680 945 1490 2300 2710 3270 80 (1K) Impedance Rated ripple (Ω) MAX. (mArms) 4R7 100 220 8 × 11.5 8 × 11.5 330 10 × 12.5 470 10 × 16 101 221 12.5 × 20 331 12.5 × 25 471 12.5 × 31.5 Impedance Rated ripple (Ω) MAX. (mArms) 8 × 11.5 10 × 12.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 18 × 31.5 340 620 680 1100 1750 2300 2710 25 (1E) Case size φD × L (mm) 2.00 1.50 0.59 0.41 0.16 0.12 0.097 130 150 530 690 1050 1290 1460 Case size φD × L (mm) 1.50 0.80 0.80 0.39 0.18 0.16 0.11 Impedance Rated ripple (Ω) MAX. (mArms) 0.13 0.10 0.075 0.057 0.033 0.020 0.017 500 680 945 1100 1750 2710 3310 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 18 × 35.5 50 (1H) Impedance Rated ripple (Ω) MAX. (mArms) 0.15 0.094 0.075 0.058 0.031 0.025 620 790 950 1330 2010 2790 Case size φD × L (mm) 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 31.5 Impedance Rated ripple (Ω) MAX. (mArms) 2.00 1.80 1.50 1.15 0.75 0.50 0.45 0.35 0.18 0.098 0.070 0.055 0.031 35 50 60 85 180 250 300 440 555 930 1330 1650 2430 100 (2A) Case size φD × L (mm) Impedance Rated ripple (Ω) MAX. (mArms) 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 12.5 × 31.5 16 × 25 35 (1V) Case size φD × L (mm) 8 × 11.5 8 × 11.5 10 × 12.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 150 480 480 790 1240 1390 1500 Impedance Rated ripple (Ω) MAX. (mArms) 2.00 1.50 0.80 0.80 0.55 0.25 0.11 0.079 130 150 480 480 630 990 1500 1790 Rated Ripple (mArms) at 125°C 100kHz Impedance (Ω) MAX. at 20°C 100kHz Frequency coefficient of rated ripple current V Frequency 120Hz 300Hz 1kHz 10kHz ~ 1000 > CV 0.50 0.64 0.83 1.00 1000 0.67 0.79 0.91 1.00 CV 10 ~ 100 V(Code) 160 (2C) Item Case size φD × L (mm) Cap. Code 4.7 10 22 33 47 68 100 150 CV 4R7 100 220 330 470 680 101 151 200 (2D) Rated ripple (mArms) 10 × 20 10 × 25 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 115 154 187 245 329 434 Case size φD × L (mm) 250 (2E) Rated ripple (mArms) 10 × 20 10 × 25 12.5 × 20 12.5 × 25 16 × 20 16 × 25 178 126 157 204 250 329 350 (2V) Case size φD × L (mm) Rated ripple (mArms) 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 178 128 171 225 292 400 (2G) 450 (2W) Case size φD × L (mm) Rated ripple (mArms) Case size φD × L (mm) Rated ripple (mArms) 10 × 20 10 × 25 12.5 × 25 16 × 25 16 × 31.5 153 185 139 189 243 10 × 20 10 × 25 12.5 × 31.5 16 × 25 16 × 31.5 153 186 142 189 243 Case size φD × L (mm) Rated ripple (mArms) 10 × 25 12.5 × 20 16 × 25 16 × 31.5 158 186 154 203 Rated Ripple (mArms) at 125°C 120Hz Frequency coefficient of rated ripple current V 160 ~ 450 Frequency 50Hz 120Hz 300Hz 1kHz 10kHz 100kHz 4.7 ~ 330 0.75 1.00 1.25 1.50 1.75 1.80 .47 ~ 150 0.80 1.00 1.15 1.30 1.40 1.50 Cap. (µF) Wider range of rating. CAT.8100V