ALUMINUM ELECTROLYTIC CAPACITORS HV High Ripple Low Impedance Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C series Lower impedance at high frequency range. Smaller case size and high ripple current. Adapted to the RoHS directive (2002/95/EC). HD Smaller HV Specifications Performance Characteristics ltem Category Temperature Range – 40 ~ +105˚C Rated Voltage Range 6.3 ~ 35V Rated Capacitance Range 47 ~ 8200µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 tan δ (MAX.) 0.21 0.18 0.15 0.13 0.11 tan δ 120Hz 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 6.3 10 16 25 35 Z–25˚C / Z+20˚C 2 2 2 2 2 Z–40˚C / Z+20˚C 3 3 3 3 3 120Hz < 6.3 : 5000 hours) After an application of D.C. bias voltage plus the rated ripple current for 6000 hours ( φD = at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Endurance Capacitance change Within ± 25% of initial value (6.3V 10V : ± 30%) tan δ 200% or less of initial specified value Leakage current lnitial specified value or less Printed with white color letter on black sleeve. Marking Type numbering system (Example : 25V 150µF) Radial Lead Type fd 1 2 3 4 5 6 7 8 9 10 11 12 UHV 1 E 1 5 1 M ED f P ± 0.5 D+0.5 MAX. Sleeve (P.E.T.) Pressure relief vent (f6.3up) L+ MAX. (L < 20) 1.5 (L 20) 2.0 15MIN 4MIN (mm) D 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 fd 0.5 0.5 0.6 0.6 0.6 0.8 f In case L > 25 for the f12.5 dia. unit, lead dia. f d = 0.8mm. • Please refer to page 21 about the end seal configulation. Size code Configuration Capacitance tolerance (± 20%) Rated Capacitance (150mF) Rated voltage (25V) Series name Type Configuration Pb-free leadwire fD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 á 16 HD Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS HV series Standard ratings V (Code) Item Cap.(µF) Code 6.3 (0J) Case size φD × L (mm) 10 (1A) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz Case size φD × L (mm) 16 (1C) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz Case size φD × L (mm) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz 5 × 11 0.23 0.76 360 5 × 11 0.23 0.76 360 6.3 × 11 0.10 0.33 450 360 6.3 × 11 0.10 0.33 450 6.3 × 11 0.10 0.33 550 0.33 460 6.3 × 11 0.10 0.33 550 8 × 11.5 0.059 0.181 830 0.33 550 0.059 0.181 820 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1360 100 101 150 151 220 221 5 × 11 0.23 0.76 330 331 6.3 × 11 0.10 470 471 6.3 × 11 0.10 8 × 11.5 680 681 8 × 11.5 0.059 0.181 900 8 × 11.5 0.059 0.181 990 8 × 15 0.046 0.143 1330 820 821 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1250 10 × 16 0.030 0.095 1650 10 × 12.5 0.043 0.133 1360 10 × 16 0.030 0.095 1815 8 × 15 0.046 0.143 1330 8 × 20 0.031 0.105 1550 10 × 16 0.030 0.095 1650 10 × 20 0.019 0.057 1930 10 × 16 0.030 0.095 1815 8 × 20 0.031 0.105 1550 10 × 20 0.019 0.057 2160 1000 102 10 × 12.5 0.043 0.133 1250 10 × 12.5 0.043 0.133 1360 8 × 15 0.046 0.143 1330 1200 122 1500 152 8 × 20 0.031 0.105 1550 1800 182 10 × 16 0.030 0.095 1815 10 × 20 0.019 0.057 2160 10 × 25 0.017 0.051 2475 2200 222 10 × 20 0.019 0.057 2160 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2725 2700 272 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2450 12.5 × 25 0.014 0.036 3190 12.5 × 31.5 0.012 0.031 3795 16 × 20 0.014 0.036 3575 3300 332 12.5 × 20 0.016 0.041 2500 12.5 × 20 0.016 0.041 2725 3900 392 12.5 × 20 0.016 0.041 2725 12.5 × 25 0.014 0.036 3190 12.5 × 35.5 0.011 0.029 3925 12.5 × 31.5 0.012 0.031 3795 16 × 20 0.014 0.036 3575 16 × 25 0.012 0.033 3990 4700 472 12.5 × 25 0.014 0.036 3190 5600 562 12.5 × 31.5 0.012 0.031 3795 12.5 × 35.5 0.011 0.029 3925 12.5 × 35.5 0.011 0.029 3925 16 × 20 0.014 0.036 3575 16 × 25 0.012 0.033 3990 16 × 25 0.012 0.033 3990 6800 682 8200 822 V (Code) Item Cap.(µF) Code 25 (1E) Case size φD × L (mm) 35 (1V) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz Case size φD × L (mm) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz 47 470 5 × 11 0.23 0.76 360 68 680 5 × 11 0.23 0.76 360 6.3 × 11 0.10 0.33 450 100 101 6.3 × 11 0.10 0.33 450 6.3 × 11 0.10 0.33 550 150 151 6.3 × 11 0.10 0.33 550 8 × 11.5 0.059 0.181 820 220 221 8 × 11.5 0.059 0.181 810 8 × 11.5 0.059 0.181 990 270 271 8 × 11.5 0.059 0.181 900 8 × 15 0.046 0.143 1330 330 331 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1360 390 391 8 × 15 0.046 0.143 1330 8 × 20 0.031 0.105 1550 470 471 10 × 12.5 0.043 0.133 1360 10 × 16 0.030 0.095 1815 560 561 8 × 20 0.031 0.105 1550 10 × 20 0.019 0.057 2160 680 681 10 × 16 0.030 0.095 1815 10 × 25 0.017 0.051 2475 820 821 10 × 20 0.019 0.057 2160 12.5 × 20 0.016 0.041 2725 1000 102 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2920 1200 122 12.5 × 20 0.016 0.041 2180 12.5 × 25 0.014 0.036 3190 12.5 × 31.5 0.012 0.031 3795 16 × 20 0.014 0.036 3575 1500 152 12.5 × 20 0.016 0.041 2725 1800 182 12.5 × 25 0.014 0.036 3190 12.5 × 35.5 0.011 0.029 3925 12.5 × 31.5 0.012 0.031 3795 16 × 20 0.014 0.036 3575 16 × 25 0.012 0.033 3990 2200 222 2700 272 12.5 × 35.5 0.011 0.029 3925 3300 332 16 × 25 0.012 0.033 3990 : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency Cap. (µF) 47 220 680 2200 4700 ~ ~ ~ ~ ~ 150 560 1800 3900 8200 120Hz 1kHz 10kHz 100kHz 0.40 0.50 0.60 0.75 0.85 0.75 0.85 0.87 0.90 0.95 0.90 0.94 0.95 0.95 0.98 1.00 1.00 1.00 1.00 1.00 CAT.8100V