ALUMINUM ELECTROLYTIC CAPACITORS PA Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies series Lower impedance than PW series. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC). PA Low Impedance PW Specifications Performance Characteristics ltem Category Temperature Range – 55 to +105˚C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 180 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. 120Hz 20˚C Rated voltage (V) 6.3 10 16 25 35 tan δ (MAX.) 0.22 0.19 0.16 0.14 0.12 Tangent of loss angle (tan δ) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 6.3 10 16 25 35 Impedance ratio ZT / Z20 (MAX.) Z–55˚C / Z+20˚C 3 3 3 3 3 120Hz Stability at Low Temperature The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 5000 hours (3000 hours for φD=8, 4000 hours for φD=10) at 105˚C, the peak voltage shall not exceed the rated voltage. Endurance Capacitance change Within ± 20% of the initial capacitance value (6.3V, 10V : ± 30%) tan δ 200% or less than the initial specified value (6.3V, 10V : 300%) Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Printed with white color letter on dark brown sleeve. Marking Type numbering system (Example : 10V 470µF) Radial Lead Type 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U PA 1 A 4 7 1 M P D d Size code P ± 0.5 φ D+ 0.5MAX. Configuration Capacitance tolerance (± 20%) Rated capacitance (470µF) Rated voltage (10V) L+ MAX. 15 MIN Series name 4 MIN Pressure relief vent Type Configuration φD Pb-free leadwire Pb-free PET sleeve 8 10 12.5 to 18 PD HD (mm) (L < 20) 1.5 (L 20) 2.0 φD 8 10 12.5 16 18 P φd 3.5 5.0 5.0 7.5 7.5 0.6 0.6 0.6 0.8 0.8 : In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. Frequency coefficient of rated ripple current • Please refer to page 20 about the end seal configulation. Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 180 to 330 0.55 0.65 0.75 0.85 1.00 390 to 1000 0.70 0.75 0.80 0.90 1.00 1200 to 10000 0.80 0.85 0.90 0.95 1.00 Cap. (µF) Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100B ALUMINUM ELECTROLYTIC CAPACITORS PA series Standard Ratings V (Code) Item Cap.(µF) Co de Case size φD × L (mm) 6.3 (0J) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz 330 390 470 560 331 391 471 561 8 × 11.5 0.090 0.180 0630 680 681 8 × 11.5 0.090 0.180 0630 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 8 × 15 0.062 0.124 0860 10 × 12.5 0.063 0.126 0900 10 × 12.5 10 × 16 8 × 20 10 × 16 10 × 20 0.063 0.049 0.044 0.049 0.035 0.126 0.098 0.088 0.098 0.070 0900 1240 1220 1240 1490 Case size φD × L (mm) 8 × 11.5 8 × 11.5 10 (1A) Impedance (Ω) MAX. 20˚C / 100kHz 0.090 0.090 – 10˚C / 100kHz 0.180 0.180 Rated ripple (mArms) 105˚C / 100kHz 0630 0630 8 × 15 10 × 12.5 8 × 20 10 × 12.5 10 × 16 8 × 20 10 × 16 0.062 0.063 0.044 0.063 0.049 0.044 0.049 0.124 0.126 0.088 0.126 0.098 0.088 0.098 0860 0900 1220 0900 1240 1220 1240 10 × 20 0.035 0.070 1490 0.035 0.033 0.033 0.029 0.029 0.070 0.066 0.066 0.058 0.058 1490 1680 1680 1890 1890 272 10 × 20 10 × 25 10 × 25 0.035 0.033 0.033 0.070 0.066 0.066 1490 1680 1680 10 × 20 10 × 25 10 × 25 12.5 × 20 12.5 × 20 3300 332 12.5 × 20 0.029 0.058 1890 12.5 × 25 0.022 0.044 2280 3900 392 12.5 × 25 0.022 0.044 2280 472 12.5 × 25 0.022 0.044 2280 0.022 0.018 0.026 0.044 0.036 0.052 2280 2720 2330 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 16 × 31.5 18 × 25 12.5 × 25 12.5 × 31.5 16 × 20 0.018 0.026 0.016 0.019 0.025 0.017 0.018 0.036 0.052 0.032 0.038 0.050 0.034 0.036 2720 2330 2940 2760 2640 2810 2850 12.5 × 35.5 0.016 0.032 2940 16 × 25 16 × 31.5 18 × 25 0.019 0.017 0.018 0.038 0.034 0.036 2760 2810 2850 4700 5600 562 6800 682 8200 822 10000 103 V (Code) Item Cap.(µF) Co de Case size φD × L (mm) 25 (1E) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz 180 181 270 271 8 × 11.5 0.090 0.180 0630 330 331 8 × 11.5 0.090 0.180 0630 390 391 8 × 15 0.062 0.124 0860 470 471 560 561 680 820 681 821 1000 102 1200 122 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 16 10 × 20 10 × 25 12.5 × 20 12.5 × 20 0.062 0.063 0.044 0.049 0.049 0.035 0.033 0.029 0.029 0.124 0.126 0.088 0.098 0.098 0.070 0.066 0.058 0.058 0860 0900 1220 1240 1240 1490 1680 1890 1890 1500 152 1800 182 12.5 × 25 0.022 0.044 2280 2200 222 12.5 × 31.5 16 × 20 0.018 0.026 0.036 0.052 2720 2330 2700 272 12.5 × 35.5 0.016 0.032 2940 16 × 25 18 × 20 18 × 25 0.019 0.025 0.018 0.038 0.050 0.036 2760 2640 2850 3300 332 4700 472 Case size φD × L (mm) 35 (1V) Impedance (Ω) MAX. Case size φD × L (mm) 16 (1C) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz – 10˚C / 100kHz 105˚C / 100kHz 8 × 11.5 8 × 11.5 10 × 12.5 0.090 0.090 0.063 0.180 0.180 0.126 0630 0630 0900 8 × 15 10 × 12.5 8 × 20 10 × 16 0.062 0.063 0.044 0.049 0.124 0.126 0.088 0.098 0860 0900 1220 1240 10 × 16 0.049 0.098 1240 10 × 20 0.035 0.070 1490 10 × 20 0.035 0.070 1490 10 × 25 0.033 0.066 1680 12.5 × 20 12.5 × 25 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 16 × 31.5 18 × 25 18 × 25 0.029 0.022 0.022 0.018 0.026 0.016 0.019 0.025 0.017 0.018 0.018 0.058 0.044 0.044 0.036 0.052 0.032 0.038 0.050 0.035 0.036 0.036 1890 2280 2280 2720 2330 2940 2760 2640 2810 2850 2850 Rated ripple (mArms) 20˚C / 100kHz – 10˚C / 100kHz 105˚C / 100kHz 8 × 11.5 8 × 15 10 × 12.5 0.090 0.062 0.063 0.180 0.124 0.126 0630 0860 0900 8 × 20 10 × 16 0.044 0.049 0.088 0.098 1220 1240 10 × 20 0.035 0.070 1490 10 × 25 12.5 × 20 0.033 0.029 0.066 0.058 1680 1890 12.5 × 20 0.029 0.058 1890 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 20 16 × 25 18 × 20 16 × 31.5 18 × 25 0.022 0.018 0.026 0.016 0.026 0.019 0.025 0.017 0.018 0.044 0.036 0.052 0.032 0.052 0.038 0.050 0.035 0.036 2280 2720 2330 2940 2330 2760 2640 2810 2850 18 × 31.5 0.016 0.032 2910 : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 3 will be put at 12th digit of type numbering system. CAT.8100B