400-002 TAG Ring Backshell 40 ® with Strain Relief Direct Coupling - Low Profile 400 F S 002 M 16 06 L 6 CONNECTOR DESIGNATORS * Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 DIRECT COUPLING Connector Designator Strain Relief Style (F, G, L) Angle and Profile A = 90 B = 45 S = Straight Cable Entry (Tables V, VI) Shell Size (Table I) Finish (Table II) Basic Part No. Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) A Thread (Table I) Ground Spring B (Table I) STYLE 2 (STRAIGHT See Note 1) Shown with Style G Nut J J G (Table III) (Table IV) E (Table III) (Table IV) F (Table IV) B (Table I) B (Table I) H (Table IV) Shown with Style L Strain Relief STYLE F Light Duty (Table VI) .416 (10.5) Approx. Cable Range © 2005 Glenair, Inc. L STYLE G Light Duty (Table V) STYLE L Light Duty (Table VI) .072 (1.8) Approx. Cable Entry K CAGE Code 06324 .850 (21.6) Approx. Cable Range L Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 40 - Page 10 400-002 TAG Ring Backshell 40 ® with Strain Relief Direct Coupling - Low Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-D-E-F B-G-K J-H-L-S C 1.000 (25.4) 1.250 (31.8) 1.000 (25.4) 1.250 (31.8) 1.000 (25.4) 1.250 (31.8) 1.735 (44.1) 1.000 (25.4) 1.250 (31.8) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.687 (42.9) 1.915 (48.6) Elbow Size 02 03 04 05 06 07 08 09 10 Dash No. 02 03 04 05 06 07 08 09 10 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE IV: ELBOW DIMENSIONS E F G Max Max Max .630 (16.0) 1.720 (43.7) .636 (16.2) .630 (16.0) 1.720 (43.7) .709 (18.0) .692 (17.6) 1.780 (45.2) .734 (18.6) .755 (19.2) 1.870 (47.5) .829 (21.1) .848 (21.5) 1.970 (50.0) .990 (25.1) 1.036 (26.3) 2.170 (55.1) 1.000 (25.4) 1.130 (28.7) 2.310 (58.7) 1.325 (33.7) 1.130 (28.7) 2.310 (58.7) 1.325 (33.7) 1.130 (28.7) 2.310 (58.7) 1.325 (33.7) TABLE V: CABLE ENTRY K Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) © 2005 Glenair, Inc. See inside back cover fold-out or pages 13 and 14 for Tables I and II. Dash No. 02 03 04 05 06 07 08 09 10 H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.250 (57.2) TABLE VI: CABLE ENTRY L Cable Range Max Min Max .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 40 - Page 11