443 443-010 EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Direct Coupling - Standard Profile CONNECTOR DESIGNATORS * 443 F S 010 NF 16 12-8 H K P A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 DIRECT COUPLING Product Series Connector Designator Angle and Profile H = 45° J = 90° S = Straight Basic Part No. Finish (Table II) Shell Size (Table I) Length ± .060 (1.52) Min. Order Length 2.5 Inch (See Note 4) Polysulfide (Omit for none) B = Band, K = Precoiled Band (Omit for none) Strain Relief Style (H, A, M, D, Tables X & XI) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Dash No. (Table V) Length *± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) A Thread (Table I) 1.25 (31.8) Max B (Table I) STYLE 2 (STRAIGHT See Note 1) J K (Table V) J E O-Rings (Table III) (Table IV) B (Table I) F (Table IV) (Table III) G (Table IV) B (Table I) O-Ring H (Table IV) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 6) Polysulfide Stripes - P Option STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) STYLE M Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range .135 (3.4) Max X Cable Range Y CAGE Code 06324 STYLE D Medium Duty (Table XI) Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 443 - Page 6 Rev. 20-AUG-2008 443 443-010 EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Direct Coupling - Standard Profile TABLE III: FRONT ADAPTER TABLE IV: ELBOW DIMENSIONS J Max - Conn. Designator H Elbow E F G Shell A-E-F Max Size Max Max Max Size J-H-L-S D-B-G-K C 04 .664 (16.9) 1.410 (35.8) .810 (20.6) 1.550 (39.4) 08/09 1.180 (30.0) 1.250 (31.8) 06 .688 (17.5) 1.430 (36.3) .870 (22.1) 1.610 (40.9) 10/11 1.180 (30.0) 1.250 (31.8) 08 .688 (17.5) 1.430 (36.3) .870 (22.1) 1.610 (40.9) 12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 10 .732 (18.6) 1.480 (37.6) .980 (24.9) 1.740 (44.2) 14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 12 .748 (19.0) 1.490 (37.8) 1.020 (25.9) 1.760 (44.7) 16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 16 .773 (19.6) 1.510 (38.4) 1.080 (27.4) 1.820 (46.2) 18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 20 1.041 (26.4) 1.750 (44.5) 1.480 (37.6) 2.210 (56.1) 20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 24 1.041 (26.4) 1.750 (44.5) 1.480 (37.6) 2.210 (56.1) 22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 28 1.092 (27.7) 1.790 (45.5) 1.610 (40.9) 2.300 (58.4) 24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) TABLE V: CABLE ENTRY 28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) See inside back cover Clamp K Dash 32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) fold-out or pages 13 and 14 Size Dia No. 36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) for Tables I and II. 03 .125 (3.2) 02 40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) 03 .188 (4.8) 03 03 .250 (6.4) 04 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 04 .312 (7.9) 05 2. Metric dimensions (mm) are indicated in parentheses. 06 .375 (9.5) 06 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 06 .438 (11.1) 07 4. Consult factory for shorter lengths on straight backshells. 08 .500 (12.7) 08 5. When using Connector Designator B refer to pages 18 and 19 for part number development. 10 .562 (14.3) 09 6. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. 10 .625 (15.9) 10 12 .688 (17.5) 11 TABLE X: CABLE ENTRY 12 .750 (19.1) 12 T V Cable Range Clamp 16 .812 (20.6) 13 Max Max Size Min Max 16 .875 (22.2) 14 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 04 16 .938 (23.8) 15 .780 (19.8) 1.145 (29.1) 06 .250 (6.4) .437 (11.1) 20 1.000 (25.4) 16 .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) 08 20 1.062 (27.0) 17 .780 (19.8) 1.332 (33.8) 10 .350 (8.9) .625 (15.9) 20 1.125 (28.6) 18 .811 (20.6) 1.551 (39.4) 12 .500 (12.7) .750 (19.1) 20 1.250 (31.8) 20 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 1.375 (34.9) 22 1.092 (27.7) 2.113 (53.7) 20 .875 (22.2) 1.250 (31.8) 28 1.500 (38.1) 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 Clamp X W Size Max Max 03* .437 (11.1) .760 (19.3) 04* .437 (11.1) .760 (19.3) 06* .500 (12.7) .760 (19.3) 08 .563 (14.3) .760 (19.3) 10 .563 (14.3) .760 (19.3) 12 .563 (14.3) .760 (19.3) 16 .656 (16.7) 1.073 (27.3) 20 .656 (16.7) 1.323 (33.6) 24 .656 (16.7) 1.323 (33.6) 28 1.188 (30.2) 1.572 (39.9) * Not available in Style M clamp. © 2005 Glenair, Inc. TABLE XI: CABLE ENTRY Y Z Cable Range Max Min ** Max Max .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) ** Not Applicable Style D CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 443 - Page 7 Rev. 20-AUG-2008